cloudstack-commits mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From mc...@apache.org
Subject [20/51] [abbrv] Preparing docs for translation
Date Tue, 05 Feb 2013 18:06:57 GMT
http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/195c6c15/docs/pot/vmware-install.pot
----------------------------------------------------------------------
diff --git a/docs/pot/vmware-install.pot b/docs/pot/vmware-install.pot
new file mode 100644
index 0000000..e85d8c5
--- /dev/null
+++ b/docs/pot/vmware-install.pot
@@ -0,0 +1,607 @@
+# 
+# AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:12:00\n"
+"PO-Revision-Date: 2013-02-02T20:12:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "VMware vSphere Installation and Configuration"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you want to use the VMware vSphere hypervisor to run guest virtual machines, install vSphere on the host(s) in your cloud."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Preparation Checklist for VMware"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For a smoother installation, gather the following information before you start:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Information listed in <xref linkend=\"vmware-vcenter-checklist\" />"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Information listed in <xref linkend=\"vmware-network-checklist\" />"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "vCenter Checklist"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You will need the following information about vCenter."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "vCenter Requirement"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Value"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Notes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "vCenter User"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This user must have admin privileges."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "vCenter User Password"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Password for the above user."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "vCenter Datacenter Name"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Name of the datacenter."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "vCenter Cluster Name"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Name of the cluster."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Networking Checklist for VMware"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You will need the following information about VLAN."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "VLAN Information"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "ESXi VLAN"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "VLAN on which all your ESXi hypervisors reside."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "ESXI VLAN IP Address"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "IP Address Range in the ESXi VLAN. One address per Virtual Router is used from this range."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "ESXi VLAN IP Gateway"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "ESXi VLAN Netmask"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Management Server VLAN"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "VLAN on which the &PRODUCT; Management server is installed."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Public VLAN"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "VLAN for the Public Network."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Public VLAN Gateway"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Public VLAN Netmask"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Public VLAN IP Address Range"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Range of Public IP Addresses available for &PRODUCT; use. These addresses will be used for virtual router on &PRODUCT; to route private traffic to external networks."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "VLAN Range for Customer use"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A contiguous range of non-routable VLANs. One VLAN will be assigned for each customer."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "vSphere Installation Steps"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you haven't already, you'll need to download and purchase vSphere from the VMware Website (<ulink url=\"https://www.vmware.com/tryvmware/index.php?p=vmware-vsphere&amp;lp=1\">https://www.vmware.com/tryvmware/index.php?p=vmware-vsphere&amp;lp=1</ulink>) and install it by following the VMware vSphere Installation Guide."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Following installation, perform the following configuration, which are described in the next few sections:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Required"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Optional"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "ESXi host setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "NIC bonding"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Configure host physical networking, virtual switch, vCenter Management Network, and extended port range"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Multipath storage"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Prepare storage for iSCSI"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Configure clusters in vCenter and add hosts to them, or add hosts without clusters to vCenter"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "ESXi Host setup"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "All ESXi hosts should enable CPU hardware virtualization support in BIOS. Please note hardware virtualization support is not enabled by default on most servers."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Physical Host Networking"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You should have a plan for cabling the vSphere hosts. Proper network configuration is required before adding a vSphere host to &PRODUCT;. To configure an ESXi host, you can use vClient to add it as standalone host to vCenter first. Once you see the host appearing in the vCenter inventory tree, click the host node in the inventory tree, and navigate to the Configuration tab."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "In the host configuration tab, click the \"Hardware/Networking\" link to bring up the networking configuration page as above."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Configure Virtual Switch"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A default virtual switch vSwitch0 is created. &PRODUCT; requires all ESXi hosts in the cloud to use the same set of virtual switch names. If you change the default virtual switch name, you will need to configure one or more &PRODUCT; configuration variables as well."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Separating Traffic"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "&PRODUCT; allows you to use vCenter to configure three separate networks per ESXi host. These networks are identified by the name of the vSwitch they are connected to. The allowed networks for configuration are public (for traffic to/from the public internet), guest (for guest-guest traffic), and private (for management and usually storage traffic). You can use the default virtual switch for all three, or create one or two other vSwitches for those traffic types."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you want to separate traffic in this way you should first create and configure vSwitches in vCenter according to the vCenter instructions. Take note of the vSwitch names you have used for each traffic type. You will configure &PRODUCT; to use these vSwitches."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Increasing Ports"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "By default a virtual switch on ESXi hosts is created with 56 ports. We recommend setting it to 4088, the maximum number of ports allowed. To do that, click the \"Properties...\" link for virtual switch (note this is not the Properties link for Networking)."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "In vSwitch properties dialog, select the vSwitch and click Edit. You should see the following dialog:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "In this dialog, you can change the number of switch ports. After you've done that, ESXi hosts are required to reboot in order for the setting to take effect."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Configure vCenter Management Network"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "In the vSwitch properties dialog box, you may see a vCenter management network. This same network will also be used as the &PRODUCT; management network. &PRODUCT; requires the vCenter management network to be configured properly. Select the management network item in the dialog, then click Edit."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Make sure the following values are set:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "VLAN ID set to the desired ID"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "vMotion enabled."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Management traffic enabled."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If the ESXi hosts have multiple VMKernel ports, and ESXi is not using the default value \"Management Network\" as the management network name, you must follow these guidelines to configure the management network port group so that &PRODUCT; can find it:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Use one label for the management network port across all ESXi hosts."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "In the &PRODUCT; UI, go to Configuration - Global Settings and set vmware.management.portgroup to the management network label from the ESXi hosts."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Extend Port Range for &PRODUCT; Console Proxy"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "(Applies only to VMware vSphere version 4.x)"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You need to extend the range of firewall ports that the console proxy works with on the hosts. This is to enable the console proxy to work with VMware-based VMs. The default additional port range is 59000-60000. To extend the port range, log in to the VMware ESX service console on each host and run the following commands:"
+msgstr ""
+
+#. Tag: programlisting
+#, no-c-format
+msgid "\n"
+"esxcfg-firewall -o 59000-60000,tcp,in,vncextras\n"
+"esxcfg-firewall -o 59000-60000,tcp,out,vncextras\n"
+"        "
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Configure NIC Bonding for vSphere"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "NIC bonding on vSphere hosts may be done according to the vSphere installation guide."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Storage Preparation for vSphere (iSCSI only)"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Use of iSCSI requires preparatory work in vCenter. You must add an iSCSI target and create an iSCSI datastore."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you are using NFS, skip this section."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Enable iSCSI initiator for ESXi hosts"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "In vCenter, go to hosts and Clusters/Configuration, and click Storage Adapters link. You will see:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Select iSCSI software adapter and click Properties."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Click the Configure... button."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Check Enabled to enable the initiator."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Click OK to save."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Add iSCSI target"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Under the properties dialog, add the iSCSI target info:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Repeat these steps for all ESXi hosts in the cluster."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Create an iSCSI datastore"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You should now create a VMFS datastore. Follow these steps to do so:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Select Home/Inventory/Datastores."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Right click on the datacenter node."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Choose Add Datastore... command."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Follow the wizard to create a iSCSI datastore."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "This procedure should be done on one host in the cluster. It is not necessary to do this on all hosts."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Multipathing for vSphere (Optional)"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Storage multipathing on vSphere nodes may be done according to the vSphere installation guide."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Add Hosts or Configure Clusters (vSphere)"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Use vCenter to create a vCenter cluster and add your desired hosts to the cluster. You will later add the entire cluster to &PRODUCT;. (see <xref linkend=\"add-clusters-vsphere\" />)."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Applying Hotfixes to a VMware vSphere Host"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Disconnect the VMware vSphere cluster from &PRODUCT;. It should remain disconnected long enough to apply the hotfix on the host."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Log in to the &PRODUCT; UI as root."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "See <xref linkend=\"log-in\" />."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Navigate to the VMware cluster, click Actions, and select Unmanage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Watch the cluster status until it shows Unmanaged."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Perform the following on each of the ESXi hosts in the cluster:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Move each of the ESXi hosts in the cluster to maintenance mode."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Ensure that all the VMs are migrated to other hosts in that cluster."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If there is only one host in that cluster, shutdown all the VMs and move the host into maintenance mode."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Apply the patch on the ESXi host."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Restart the host if prompted."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Cancel the maintenance mode on the host."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Reconnect the cluster to &PRODUCT;:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Navigate to the VMware cluster, click Actions, and select Manage."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Watch the status to see that all the hosts come up. It might take several minutes for the hosts to come up."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Alternatively, verify the host state is properly synchronized and updated in the &PRODUCT; database."
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/195c6c15/docs/pot/vmware-requirements.pot
----------------------------------------------------------------------
diff --git a/docs/pot/vmware-requirements.pot b/docs/pot/vmware-requirements.pot
new file mode 100644
index 0000000..e13d505
--- /dev/null
+++ b/docs/pot/vmware-requirements.pot
@@ -0,0 +1,199 @@
+# 
+# AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:12:00\n"
+"PO-Revision-Date: 2013-02-02T20:12:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "System Requirements for vSphere Hosts"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Software requirements:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "vSphere and vCenter, both version 4.1 or 5.0."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "vSphere Standard is recommended. Note however that customers need to consider the CPU constraints in place with vSphere licensing. See <ulink url=\"http://www.vmware.com/files/pdf/vsphere_pricing.pdf\">http://www.vmware.com/files/pdf/vsphere_pricing.pdf</ulink> and discuss with your VMware sales representative."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "vCenter Server Standard is recommended."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Be sure all the hotfixes provided by the hypervisor vendor are applied. Track the release of hypervisor patches through your hypervisor vendor's support channel, and apply patches as soon as possible after they are released. &PRODUCT; will not track or notify you of required hypervisor patches. It is essential that your hosts are completely up to date with the provided hypervisor patches. The hypervisor vendor is likely to refuse to support any system that is not up to date with patches."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Apply All Necessary Hotfixes"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The lack of up-do-date hotfixes can lead to data corruption and lost VMs."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Hardware requirements:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The host must be certified as compatible with vSphere. See the VMware Hardware Compatibility Guide at <ulink url=\"http://www.vmware.com/resources/compatibility/search.php\">http://www.vmware.com/resources/compatibility/search.php</ulink>."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "All hosts must be 64-bit and must support HVM (Intel-VT or AMD-V enabled)."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "All hosts within a cluster must be homogenous. That means the CPUs must be of the same type, count, and feature flags."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "64-bit x86 CPU (more cores results in better performance)"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Hardware virtualization support required"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "4 GB of memory"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "36 GB of local disk"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "At least 1 NIC"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Statically allocated IP Address"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "vCenter Server requirements:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Processor - 2 CPUs 2.0GHz or higher Intel or AMD x86 processors. Processor requirements may be higher if the database runs on the same machine."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Memory - 3GB RAM. RAM requirements may be higher if your database runs on the same machine."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Disk storage - 2GB. Disk requirements may be higher if your database runs on the same machine."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Microsoft SQL Server 2005 Express disk requirements. The bundled database requires up to 2GB free disk space to decompress the installation archive."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Networking - 1Gbit or 10Gbit."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For more information, see \"vCenter Server and the vSphere Client Hardware Requirements\" at <ulink url=\"http://pubs.vmware.com/vsp40/wwhelp/wwhimpl/js/html/wwhelp.htm#href=install/c_vc_hw.html\">http://pubs.vmware.com/vsp40/wwhelp/wwhimpl/js/html/wwhelp.htm#href=install/c_vc_hw.html</ulink>."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Other requirements:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "VMware vCenter Standard Edition 4.1 or 5.0 must be installed and available to manage the vSphere hosts."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "vCenter must be configured to use the standard port 443 so that it can communicate with the &PRODUCT; Management Server."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You must re-install VMware ESXi if you are going to re-use a host from a previous install."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "&PRODUCT; requires VMware vSphere 4.1 or 5.0. VMware vSphere 4.0 is not supported."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "All hosts must be 64-bit and must support HVM (Intel-VT or AMD-V enabled). All hosts within a cluster must be homogenous. That means the CPUs must be of the same type, count, and feature flags."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The &PRODUCT; management network must not be configured as a separate virtual network. The &PRODUCT; management network is the same as the vCenter management network, and will inherit its configuration. See <xref linkend=\"vmware-physical-host-networking-config-vcenter-mgt\" />."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "&PRODUCT; requires ESXi. ESX is not supported."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "All resources used for &PRODUCT; must be used for &PRODUCT; only. &PRODUCT; cannot share instance of ESXi or storage with other management consoles. Do not share the same storage volumes that will be used by &PRODUCT; with a different set of ESXi servers that are not managed by &PRODUCT;."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Put all target ESXi hypervisors in a cluster in a separate Datacenter in vCenter."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The cluster that will be managed by &PRODUCT; should not contain any VMs. Do not run the management server, vCenter or any other VMs on the cluster that is designated for &PRODUCT; use. Create a separate cluster for use of &PRODUCT; and make sure that they are no VMs in this cluster."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "All the required VLANS must be trunked into all network switches that are connected to the ESXi hypervisor hosts. These would include the VLANS for Management, Storage, vMotion, and guest VLANs. The guest VLAN (used in Advanced Networking; see Network Setup) is a contiguous range of VLANs that will be managed by &PRODUCT;."
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/195c6c15/docs/pot/vmware-topology-req.pot
----------------------------------------------------------------------
diff --git a/docs/pot/vmware-topology-req.pot b/docs/pot/vmware-topology-req.pot
new file mode 100644
index 0000000..514ef3b
--- /dev/null
+++ b/docs/pot/vmware-topology-req.pot
@@ -0,0 +1,34 @@
+# 
+# AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:12:00\n"
+"PO-Revision-Date: 2013-02-02T20:12:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "VMware Topology Requirements"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The Management Server and secondary storage VMs must be able to access vCenter and all ESXi hosts in the zone. To allow the necessary access through the firewall, keep port 443 open."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The Management Servers communicate with VMware vCenter servers on port 443 (HTTPs)."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The Management Servers communicate with the System VMs on port 3922 (ssh) on the management traffic network."
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/195c6c15/docs/pot/volume-deletion-garbage-collection.pot
----------------------------------------------------------------------
diff --git a/docs/pot/volume-deletion-garbage-collection.pot b/docs/pot/volume-deletion-garbage-collection.pot
new file mode 100644
index 0000000..668b657
--- /dev/null
+++ b/docs/pot/volume-deletion-garbage-collection.pot
@@ -0,0 +1,49 @@
+# 
+# AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:12:00\n"
+"PO-Revision-Date: 2013-02-02T20:12:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Volume Deletion and Garbage Collection"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The deletion of a volume does not delete the snapshots that have been created from the volume"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "When a VM is destroyed, data disk volumes that are attached to the VM are not deleted."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Volumes are permanently destroyed using a garbage collection process. The global configuration variables expunge.delay and expunge.interval determine when the physical deletion of volumes will occur."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "expunge.delay: determines how old the volume must be before it is destroyed, in seconds"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "expunge.interval: determines how often to run the garbage collection check"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Administrators should adjust these values depending on site policies around data retention."
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/195c6c15/docs/pot/volume-status.pot
----------------------------------------------------------------------
diff --git a/docs/pot/volume-status.pot b/docs/pot/volume-status.pot
new file mode 100644
index 0000000..5a0a85a
--- /dev/null
+++ b/docs/pot/volume-status.pot
@@ -0,0 +1,29 @@
+# 
+# AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:12:00\n"
+"PO-Revision-Date: 2013-02-02T20:12:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Volume Status"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "When a snapshot operation is triggered by means of a recurring snapshot policy, a snapshot is skipped if a volume has remained inactive since its last snapshot was taken. A volume is considered to be inactive if it is either detached or attached to a VM that is not running. &PRODUCT; ensures that at least one snapshot is taken since the volume last became inactive."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "When a snapshot is taken manually, a snapshot is always created regardless of whether a volume has been active or not."
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/195c6c15/docs/pot/vpc.pot
----------------------------------------------------------------------
diff --git a/docs/pot/vpc.pot b/docs/pot/vpc.pot
new file mode 100644
index 0000000..b0cb47a
--- /dev/null
+++ b/docs/pot/vpc.pot
@@ -0,0 +1,229 @@
+# 
+# AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:12:00\n"
+"PO-Revision-Date: 2013-02-02T20:12:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "About Virtual Private Clouds"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "&PRODUCT; Virtual Private Cloud is a private, isolated part of &PRODUCT;. A VPC can have its own virtual network topology that resembles a traditional physical network. You can launch VMs in the virtual network that can have private addresses in the range of your choice, for example: 10.0.0.0/16. You can define network tiers within your VPC network range, which in turn enables you to group similar kinds of instances based on IP address range."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For example, if a VPC has the private range 10.0.0.0/16, its guest networks can have the network ranges 10.0.1.0/24, 10.0.2.0/24, 10.0.3.0/24, and so on."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Major Components of a VPC:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A VPC is comprised of the following network components:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">VPC</emphasis>: A VPC acts as a container for multiple isolated networks that can communicate with each other via its virtual router."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">Network Tiers</emphasis>: Each tier acts as an isolated network with its own VLANs and CIDR list, where you can place groups of resources, such as VMs. The tiers are segmented by means of VLANs. The NIC of each tier acts as its gateway."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">Virtual Router</emphasis>: A virtual router is automatically created and started when you create a VPC. The virtual router connect the tiers and direct traffic among the public gateway, the VPN gateways, and the NAT instances. For each tier, a corresponding NIC and IP exist in the virtual router. The virtual router provides DNS and DHCP services through its IP."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">Public Gateway</emphasis>: The traffic to and from the Internet routed to the VPC through the public gateway. In a VPC, the public gateway is not exposed to the end user; therefore, static routes are not support for the public gateway."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">Private Gateway</emphasis>: All the traffic to and from a private network routed to the VPC through the private gateway. For more information, see <xref linkend=\"add-gateway-vpc\" />."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">VPN Gateway</emphasis>: The VPC side of a VPN connection."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">Site-to-Site VPN Connection</emphasis>: A hardware-based VPN connection between your VPC and your datacenter, home network, or co-location facility. For more information, see <xref linkend=\"site-to-site-vpn\" />."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">Customer Gateway</emphasis>: The customer side of a VPN Connection. For more information, see <xref linkend=\"create-vpn-customer-gateway\" />."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">NAT Instance</emphasis>: An instance that provides Port Address Translation for instances to access the Internet via the public gateway. For more information, see <xref linkend=\"enable-disable-static-nat-vpc\" />."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Network Architecture in a VPC"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "In a VPC, the following four basic options of network architectures are present:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "VPC with a public gateway only"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "VPC with public and private gateways"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "VPC with public and private gateways and site-to-site VPN access"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "VPC with a private gateway only and site-to-site VPN access"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Connectivity Options for a VPC"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "You can connect your VPC to:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The Internet through the public gateway."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The corporate datacenter by using a site-to-site VPN connection through the VPN gateway."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Both the Internet and your corporate datacenter by using both the public gateway and a VPN gateway."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "VPC Network Considerations"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Consider the following before you create a VPC:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A VPC, by default, is created in the enabled state."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A VPC can be created in Advance zone only, and can't belong to more than one zone at a time."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The default number of VPCs an account can create is 20. However, you can change it by using the max.account.vpcs global parameter, which controls the maximum number of VPCs an account is allowed to create."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The default number of tiers an account can create within a VPC is 3. You can configure this number by using the vpc.max.networks parameter."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Each tier should have an unique CIDR in the VPC. Ensure that the tier's CIDR should be within the VPC CIDR range."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A tier belongs to only one VPC."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "All network tiers inside the VPC should belong to the same account."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "When a VPC is created, by default, a SourceNAT IP is allocated to it. The Source NAT IP is released only when the VPC is removed."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A public IP can be used for only one purpose at a time. If the IP is a sourceNAT, it cannot be used for StaticNAT or port forwarding."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The instances only have a private IP address that you provision. To communicate with the Internet, enable NAT to an instance that you launch in your VPC."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Only new networks can be added to a VPC. The maximum number of networks per VPC is limited by the value you specify in the vpc.max.networks parameter. The default value is three."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The load balancing service can be supported by only one tier inside the VPC."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If an IP address is assigned to a tier:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "That IP can't be used by more than one tier at a time in the VPC. For example, if you have tiers A and B, and a public IP1, you can create a port forwarding rule by using the IP either for A or B, but not for both."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "That IP can't be used for StaticNAT, load balancing, or port forwarding rules for another guest network inside the VPC."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Remote access VPN is not supported in VPC networks."
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/195c6c15/docs/pot/vpn.pot
----------------------------------------------------------------------
diff --git a/docs/pot/vpn.pot b/docs/pot/vpn.pot
new file mode 100644
index 0000000..64b78dd
--- /dev/null
+++ b/docs/pot/vpn.pot
@@ -0,0 +1,39 @@
+# 
+# AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:12:00\n"
+"PO-Revision-Date: 2013-02-02T20:12:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "VPN"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "&PRODUCT; account owners can create virtual private networks (VPN) to access their virtual machines. If the guest network is instantiated from a network offering that offers the Remote Access VPN service, the virtual router (based on the System VM) is used to provide the service. &PRODUCT; provides a L2TP-over-IPsec-based remote access VPN service to guest virtual networks. Since each network gets its own virtual router, VPNs are not shared across the networks. VPN clients native to Windows, Mac OS X and iOS can be used to connect to the guest networks. The account owner can create and manage users for their VPN. &PRODUCT; does not use its account database for this purpose but uses a separate table. The VPN user database is shared across all the VPNs created by the account owner. All VPN users get access to all VPNs created by the account owner."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Make sure that not all traffic goes through the VPN. That is, the route installed by the VPN should be only for the guest network and not for all traffic."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">Road Warrior / Remote Access</emphasis>. Users want to be able to connect securely from a home or office to a private network in the cloud. Typically, the IP address of the connecting client is dynamic and cannot be preconfigured on the VPN server."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">Site to Site</emphasis>. In this scenario, two private subnets are connected over the public Internet with a secure VPN tunnel. The cloud user’s subnet (for example, an office network) is connected through a gateway to the network in the cloud. The address of the user’s gateway must be preconfigured on the VPN server in the cloud. Note that although L2TP-over-IPsec can be used to set up Site-to-Site VPNs, this is not the primary intent of this feature."
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/195c6c15/docs/pot/whatis.pot
----------------------------------------------------------------------
diff --git a/docs/pot/whatis.pot b/docs/pot/whatis.pot
new file mode 100644
index 0000000..e82ec9b
--- /dev/null
+++ b/docs/pot/whatis.pot
@@ -0,0 +1,39 @@
+# 
+# AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:12:00\n"
+"PO-Revision-Date: 2013-02-02T20:12:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "What Is &PRODUCT;?"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "&PRODUCT; is an open source software platform that pools computing resources to build public, private, and hybrid Infrastructure as a Service (IaaS) clouds. &PRODUCT; manages the network, storage, and compute nodes that make up a cloud infrastructure. Use &PRODUCT; to deploy, manage, and configure cloud computing environments."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Typical users are service providers and enterprises. With &PRODUCT;, you can:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Set up an on-demand, elastic cloud computing service. Service providers can sell self service virtual machine instances, storage volumes, and networking configurations over the Internet."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Set up an on-premise private cloud for use by employees. Rather than managing virtual machines in the same way as physical machines, with &PRODUCT; an enterprise can offer self-service virtual machines to users without involving IT departments."
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/195c6c15/docs/pot/whats-in-this-adminguide.pot
----------------------------------------------------------------------
diff --git a/docs/pot/whats-in-this-adminguide.pot b/docs/pot/whats-in-this-adminguide.pot
new file mode 100644
index 0000000..bed2378
--- /dev/null
+++ b/docs/pot/whats-in-this-adminguide.pot
@@ -0,0 +1,24 @@
+# 
+# AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:12:00\n"
+"PO-Revision-Date: 2013-02-02T20:12:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Who Should Read This"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If you have already installed &PRODUCT; or you want to learn more about the ongoing operation and maintenance of a &PRODUCT;-powered cloud, read this documentation. It will help you start using, configuring, and managing the ongoing operation of your cloud."
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/195c6c15/docs/pot/whats-new.pot
----------------------------------------------------------------------
diff --git a/docs/pot/whats-new.pot b/docs/pot/whats-new.pot
new file mode 100644
index 0000000..84b305b
--- /dev/null
+++ b/docs/pot/whats-new.pot
@@ -0,0 +1,34 @@
+# 
+# AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:12:00\n"
+"PO-Revision-Date: 2013-02-02T20:12:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "What's New in the API?"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The following describes any new major features of each &PRODUCT; version as it applies to API usage."
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "What's New in the API for 4.0"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "What's New in the API for 3.0"
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/195c6c15/docs/pot/who-should-read-installation.pot
----------------------------------------------------------------------
diff --git a/docs/pot/who-should-read-installation.pot b/docs/pot/who-should-read-installation.pot
new file mode 100644
index 0000000..a55ac00
--- /dev/null
+++ b/docs/pot/who-should-read-installation.pot
@@ -0,0 +1,24 @@
+# 
+# AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:12:00\n"
+"PO-Revision-Date: 2013-02-02T20:12:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Who Should Read This"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For those who have already gone through a design phase and planned a more sophisticated deployment, or those who are ready to start scaling up a trial installation. With the following procedures, you can start using the more powerful features of &PRODUCT;, such as advanced VLAN networking, high availability, additional network elements such as load balancers and firewalls, and support for multiple hypervisors including Citrix XenServer, KVM, and VMware vSphere."
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/195c6c15/docs/pot/windows-installation.pot
----------------------------------------------------------------------
diff --git a/docs/pot/windows-installation.pot b/docs/pot/windows-installation.pot
new file mode 100644
index 0000000..3c36c20
--- /dev/null
+++ b/docs/pot/windows-installation.pot
@@ -0,0 +1,24 @@
+# 
+# AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:12:00\n"
+"PO-Revision-Date: 2013-02-02T20:12:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Windows OS Installation"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Download the installer, CloudInstanceManager.msi, from <ulink url=\"http://cloudstack.org/download.html\">Download page</ulink> and run the installer in the newly created Windows VM."
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/195c6c15/docs/pot/work-with-usage.pot
----------------------------------------------------------------------
diff --git a/docs/pot/work-with-usage.pot b/docs/pot/work-with-usage.pot
new file mode 100644
index 0000000..5e7809e
--- /dev/null
+++ b/docs/pot/work-with-usage.pot
@@ -0,0 +1,34 @@
+# 
+# AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:12:00\n"
+"PO-Revision-Date: 2013-02-02T20:12:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Working with Usage"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The Usage Server is an optional, separately-installed part of &PRODUCT; that provides aggregated usage records which you can use to create billing integration for &PRODUCT;. The Usage Server works by taking data from the events log and creating summary usage records that you can access using the listUsageRecords API call."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The usage records show the amount of resources, such as VM run time or template storage space, consumed by guest instances."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The Usage Server runs at least once per day. It can be configured to run multiple times per day."
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/195c6c15/docs/pot/working-with-hosts.pot
----------------------------------------------------------------------
diff --git a/docs/pot/working-with-hosts.pot b/docs/pot/working-with-hosts.pot
new file mode 100644
index 0000000..77dcba3
--- /dev/null
+++ b/docs/pot/working-with-hosts.pot
@@ -0,0 +1,29 @@
+# 
+# AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:12:00\n"
+"PO-Revision-Date: 2013-02-02T20:12:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Working With Hosts"
+msgstr ""
+
+#. Tag: title
+#, no-c-format
+msgid "Adding Hosts"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Additional hosts can be added at any time to provide more capacity for guest VMs. For requirements and instructions, see <xref linkend=\"host-add\" />."
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/195c6c15/docs/pot/working-with-iso.pot
----------------------------------------------------------------------
diff --git a/docs/pot/working-with-iso.pot b/docs/pot/working-with-iso.pot
new file mode 100644
index 0000000..3bf449a
--- /dev/null
+++ b/docs/pot/working-with-iso.pot
@@ -0,0 +1,39 @@
+# 
+# AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:12:00\n"
+"PO-Revision-Date: 2013-02-02T20:12:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Working with ISOs"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "&PRODUCT; supports ISOs and their attachment to guest VMs. An ISO is a read-only file that has an ISO/CD-ROM style file system. Users can upload their own ISOs and mount them on their guest VMs."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "ISOs are uploaded based on a URL. HTTP is the supported protocol. Once the ISO is available via HTTP specify an upload URL such as http://my.web.server/filename.iso."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "ISOs may be public or private, like templates.ISOs are not hypervisor-specific. That is, a guest on vSphere can mount the exact same image that a guest on KVM can mount."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "ISO images may be stored in the system and made available with a privacy level similar to templates. ISO images are classified as either bootable or not bootable. A bootable ISO image is one that contains an OS image. &PRODUCT; allows a user to boot a guest VM off of an ISO image. Users can also attach ISO images to guest VMs. For example, this enables installing PV drivers into Windows. ISO images are not hypervisor-specific."
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/195c6c15/docs/pot/working-with-snapshots.pot
----------------------------------------------------------------------
diff --git a/docs/pot/working-with-snapshots.pot b/docs/pot/working-with-snapshots.pot
new file mode 100644
index 0000000..738b854
--- /dev/null
+++ b/docs/pot/working-with-snapshots.pot
@@ -0,0 +1,44 @@
+# 
+# AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:12:00\n"
+"PO-Revision-Date: 2013-02-02T20:12:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Working with Snapshots"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "(Supported for the following hypervisors: <emphasis role=\"bold\">XenServer</emphasis>, <emphasis role=\"bold\">VMware vSphere</emphasis>, and <emphasis role=\"bold\">KVM</emphasis>)"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "&PRODUCT; supports snapshots of disk volumes. Snapshots are a point-in-time capture of virtual machine disks. Memory and CPU states are not captured."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Snapshots may be taken for volumes, including both root and data disks. The administrator places a limit on the number of stored snapshots per user. Users can create new volumes from the snapshot for recovery of particular files and they can create templates from snapshots to boot from a restored disk."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Users can create snapshots manually or by setting up automatic recurring snapshot policies. Users can also create disk volumes from snapshots, which may be attached to a VM like any other disk volume. Snapshots of both root disks and data disks are supported. However, &PRODUCT; does not currently support booting a VM from a recovered root disk. A disk recovered from snapshot of a root disk is treated as a regular data disk; the data on recovered disk can be accessed by attaching the disk to a VM."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A completed snapshot is copied from primary storage to secondary storage, where it is stored until deleted or purged by newer snapshot."
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/195c6c15/docs/pot/working-with-system-vm.pot
----------------------------------------------------------------------
diff --git a/docs/pot/working-with-system-vm.pot b/docs/pot/working-with-system-vm.pot
new file mode 100644
index 0000000..b867e61
--- /dev/null
+++ b/docs/pot/working-with-system-vm.pot
@@ -0,0 +1,24 @@
+# 
+# AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:12:00\n"
+"PO-Revision-Date: 2013-02-02T20:12:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Working with System Virtual Machines"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "&PRODUCT; uses several types of system virtual machines to perform tasks in the cloud. In general &PRODUCT; manages these system VMs and creates, starts, and stops them as needed based on scale and immediate needs. However, the administrator should be aware of them and their roles to assist in debugging issues."
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/195c6c15/docs/pot/working-with-templates.pot
----------------------------------------------------------------------
diff --git a/docs/pot/working-with-templates.pot b/docs/pot/working-with-templates.pot
new file mode 100644
index 0000000..04b13ec
--- /dev/null
+++ b/docs/pot/working-with-templates.pot
@@ -0,0 +1,34 @@
+# 
+# AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:12:00\n"
+"PO-Revision-Date: 2013-02-02T20:12:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Working with Templates"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A template is a reusable configuration for virtual machines. When users launch VMs, they can choose from a list of templates in &PRODUCT;."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Specifically, a template is a virtual disk image that includes one of a variety of operating systems, optional additional software such as office applications, and settings such as access control to determine who can use the template. Each template is associated with a particular type of hypervisor, which is specified when the template is added to &PRODUCT;."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "&PRODUCT; ships with a default template. In order to present more choices to users, &PRODUCT; administrators and users can create templates and add them to &PRODUCT;."
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/195c6c15/docs/pot/working-with-usage-data.pot
----------------------------------------------------------------------
diff --git a/docs/pot/working-with-usage-data.pot b/docs/pot/working-with-usage-data.pot
new file mode 100644
index 0000000..cbe6d49
--- /dev/null
+++ b/docs/pot/working-with-usage-data.pot
@@ -0,0 +1,34 @@
+# 
+# AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:12:00\n"
+"PO-Revision-Date: 2013-02-02T20:12:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Working With Usage Data"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The Usage Server provides aggregated usage records which you can use to create billing integration for the &PRODUCT; platform. The Usage Server works by taking data from the events log and creating summary usage records that you can access using the listUsageRecords API call."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The usage records show the amount of resources, such as VM run time or template storage space, consumed by guest instances. In the special case of bare metal instances, no template storage resources are consumed, but records showing zero usage are still included in the Usage Server's output."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The Usage Server runs at least once per day. It can be configured to run multiple times per day. Its behavior is controlled by configuration settings as described in the &PRODUCT; Administration Guide."
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/195c6c15/docs/pot/working-with-volumes.pot
----------------------------------------------------------------------
diff --git a/docs/pot/working-with-volumes.pot b/docs/pot/working-with-volumes.pot
new file mode 100644
index 0000000..f7f189f
--- /dev/null
+++ b/docs/pot/working-with-volumes.pot
@@ -0,0 +1,34 @@
+# 
+# AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:12:00\n"
+"PO-Revision-Date: 2013-02-02T20:12:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Using Swift for Secondary Storage"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "A volume provides storage to a guest VM. The volume can provide for a root disk or an additional data disk. &PRODUCT; supports additional volumes for guest VMs."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Volumes are created for a specific hypervisor type. A volume that has been attached to guest using one hypervisor type (e.g, XenServer) may not be attached to a guest that is using another hypervisor type (e.g. vSphere, KVM). This is because the different hypervisors use different disk image formats."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "&PRODUCT; defines a volume as a unit of storage available to a guest VM. Volumes are either root disks or data disks. The root disk has \"/\" in the file system and is usually the boot device. Data disks provide for additional storage (e.g. As \"/opt\" or \"D:\"). Every guest VM has a root disk, and VMs can also optionally have a data disk. End users can mount multiple data disks to guest VMs. Users choose data disks from the disk offerings created by administrators. The user can create a template from a volume as well; this is the standard procedure for private template creation. Volumes are hypervisor-specific: a volume from one hypervisor type may not be used on a guest of another hypervisor type."
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/195c6c15/docs/pot/xenserver-maintenance-mode.pot
----------------------------------------------------------------------
diff --git a/docs/pot/xenserver-maintenance-mode.pot b/docs/pot/xenserver-maintenance-mode.pot
new file mode 100644
index 0000000..1d110d8
--- /dev/null
+++ b/docs/pot/xenserver-maintenance-mode.pot
@@ -0,0 +1,74 @@
+# 
+# AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:12:00\n"
+"PO-Revision-Date: 2013-02-02T20:12:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "XenServer and Maintenance Mode"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For XenServer, you can take a server offline temporarily by using the Maintenance Mode feature in XenCenter. When you place a server into Maintenance Mode, all running VMs are automatically migrated from it to another host in the same pool. If the server is the pool master, a new master will also be selected for the pool. While a server is Maintenance Mode, you cannot create or start any VMs on it."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">To place a server in Maintenance Mode:</emphasis>"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "In the Resources pane, select the server, then do one of the following:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Right-click, then click Enter Maintenance Mode on the shortcut menu."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "On the Server menu, click Enter Maintenance Mode"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Click Enter Maintenance Mode"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The server's status in the Resources pane shows when all running VMs have been successfully migrated off the server."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">To take a server out of Maintenance Mode:</emphasis>"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Right-click, then click Exit Maintenance Mode on the shortcut menu."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "On the Server menu, click Exit Maintenance Mode"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Click Exit Maintenance Mode"
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/195c6c15/docs/pot/xenserver-topology-req.pot
----------------------------------------------------------------------
diff --git a/docs/pot/xenserver-topology-req.pot b/docs/pot/xenserver-topology-req.pot
new file mode 100644
index 0000000..7828e37
--- /dev/null
+++ b/docs/pot/xenserver-topology-req.pot
@@ -0,0 +1,24 @@
+# 
+# AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:12:00\n"
+"PO-Revision-Date: 2013-02-02T20:12:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "XenServer Topology Requirements"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The Management Servers communicate with XenServer hosts on ports 22 (ssh), 80 (HTTP), and 443 (HTTPs)."
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/195c6c15/docs/pot/zone-add.pot
----------------------------------------------------------------------
diff --git a/docs/pot/zone-add.pot b/docs/pot/zone-add.pot
new file mode 100644
index 0000000..146a65d
--- /dev/null
+++ b/docs/pot/zone-add.pot
@@ -0,0 +1,144 @@
+# 
+# AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: 0\n"
+"POT-Creation-Date: 2013-02-02T20:12:00\n"
+"PO-Revision-Date: 2013-02-02T20:12:00\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: None\n"
+"MIME-Version: 1.0\n"
+"Content-Type: application/x-publican; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Tag: title
+#, no-c-format
+msgid "Adding a Zone"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "These steps assume you have already logged in to the &PRODUCT; UI. See <xref linkend=\"log-in\" />."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "(Optional) If you are going to use Swift for cloud-wide secondary storage, you need to add it before you add zones."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Log in to the &PRODUCT; UI as administrator."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "If this is your first time visiting the UI, you will see the guided tour splash screen. Choose “Experienced user.” The Dashboard appears."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "In the left navigation bar, click Global Settings."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "In the search box, type swift.enable and click the search button."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Click the edit button and set swift.enable to true. <inlinemediaobject> <imageobject> <imagedata fileref=\"./images/edit-icon.png\" /> </imageobject> <textobject><phrase>edit-icon.png: button to modify data</phrase></textobject> </inlinemediaobject>"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Restart the Management Server."
+msgstr ""
+
+#. Tag: programlisting
+#, no-c-format
+msgid "# service cloud-management restart"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Refresh the &PRODUCT; UI browser tab and log back in."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "In the left navigation, choose Infrastructure."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "On Zones, click View More."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "(Optional) If you are using Swift storage, click Enable Swift. Provide the following:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">URL.</emphasis> The Swift URL."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">Account.</emphasis> The Swift account."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">Username.</emphasis> The Swift account’s username."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">Key.</emphasis> The Swift key."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Click Add Zone. The zone creation wizard will appear."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "Choose one of the following network types:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">Basic.</emphasis> For AWS-style networking. Provides a single network where each VM instance is assigned an IP directly from the network. Guest isolation can be provided through layer-3 means such as security groups (IP address source filtering)."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<emphasis role=\"bold\">Advanced.</emphasis> For more sophisticated network topologies. This network model provides the most flexibility in defining guest networks and providing custom network offerings such as firewall, VPN, or load balancer support."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "For more information about the network types, see Network Setup."
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "The rest of the steps differ depending on whether you chose Basic or Advanced. Continue with the steps that apply to you:"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<xref linkend=\"basic-zone-configuration\" />"
+msgstr ""
+
+#. Tag: para
+#, no-c-format
+msgid "<xref linkend=\"advanced-zone-configuration\" />"
+msgstr ""
+

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/195c6c15/docs/settx.sh
----------------------------------------------------------------------
diff --git a/docs/settx.sh b/docs/settx.sh
new file mode 100755
index 0000000..5506325
--- /dev/null
+++ b/docs/settx.sh
@@ -0,0 +1,23 @@
+#!/bin/bash
+#Licensed to the Apache Software Foundation (ASF) under one
+#or more contributor license agreements.  See the NOTICE file
+#distributed with this work for additional information
+#regarding copyright ownership.  The ASF licenses this file
+#to you under the Apache License, Version 2.0 (the
+#"License"); you may not use this file except in compliance
+#with the License.  You may obtain a copy of the License at
+#http://www.apache.org/licenses/LICENSE-2.0
+#Unless required by applicable law or agreed to in writing,
+#software distributed under the License is distributed on an
+#"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+#KIND, either express or implied.  See the License for the
+#specific language governing permissions and limitations
+#under the License.
+
+for file in `ls pot | grep .pot`; do
+    resource=`basename $file .pot`
+    echo $resource
+    tx set -t PO --auto-local -r ACS_DOCS.$resource "<lang>/$resource.po" \
+    --source-lang=en \
+    --source-file "pot/$resource.pot" --execute
+done


Mime
View raw message