cassandra-commits mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From "ZhaoYang (JIRA)" <j...@apache.org>
Subject [jira] [Comment Edited] (CASSANDRA-11500) Obsolete MV entry may not be properly deleted
Date Wed, 26 Jul 2017 15:47:01 GMT

    [ https://issues.apache.org/jira/browse/CASSANDRA-11500?page=com.atlassian.jira.plugin.system.issuetabpanels:comment-tabpanel&focusedCommentId=16082241#comment-16082241
] 

ZhaoYang edited comment on CASSANDRA-11500 at 7/26/17 3:46 PM:
---------------------------------------------------------------

h3. Relation: base -> view

First of all, I think all of us should agree on what cases view row should exists.

IMO, there are two main cases:

1. base pk and view pk are the same (order doesn't matter) and view has no filter conditions
or only conditions on base pk.
(filter condition mean: {{c = 1}} in view's where clause. filter condition is not a concern
here, since no previous view data to be cleared.)

view row exists if any of following is true:
* a. base row pk has live livenessInfo(timestamp) and base row pk satifies view's filter conditions
if any.
* b. or one of base row columns selected in view has live timestamp (via update) and base
row pk satifies view's filter conditions if any. this is handled by existing mechanism of
liveness and tombstone since all info are included in view row
* c. or one of base row columns not selected in view has live timestamp (via update) and base
row pk satifies view's filter conditions if any. Those unselected columns' timestamp/ttl/cell-deletion
info are not currently stored on view row.

2. base column used in view pk or view has filter conditions on base non-key column which
can also lead to entire view row being wiped.

view row exists if any of following is true:
* a. base row pk has live livenessInfo(timestamp) && base column used in view pk is
not null but no timestamp && conditions are satisfied. ( pk having live livenesInfo
means it is not deleted by tombstone)
* b. or base row column in view pk has timestamp (via update) && conditions are satisfied.
eg. if base column used in view pk is TTLed, entire view row should be wiped.

Next thing is to model "view's tombstone and livenessInfo" to maintain view data based on
above cases.
 
h3. Previous known issues: 
(I might miss some issues, feel free to ping me..)

ttl
* view row is not wiped when TTLed on base column used in view pk or TTLed on base non-key
column with filter condition
* cells with same timestamp, merging ttls are not deterministic.

partial update on base columns not selected in view
* it results in no view data. because of current update semantics, no view updates are generated
* corresponding view row' liveness is not depending on liveness of base columns

filter conditions or base column used in view pk causes
* view row is shadowed after a few modification on base column used in view pk if the base
non-key column has TS greater than base pk's ts and view key column's ts. (as mentioned by
sylvain: we need to be able to re-insert an entry when a prior one had been deleted need to
be careful to hanlde timestamp tie)

tombstone merging is not commutative
* in current code, shadowable tombstone doesn't co-exist with regular tombstone

sstabledump not supporting current shadowable tombstone

h3. Model

I can think of two ways to ship all required base column info to view:
    * make base columns that are not selected in view as "virtual cell" and store their imestamp/ttl
to view without their actual values. so we can reuse current ts/tb/ttl mechanism with additional
validation logic to check if a view row is alive.
    * or storing those info on view's livenessInfo/deletion with addition merge logic to make
sure view liveness/deletion are ordered properly even in the case of timestamp tie. It's like
a replacement stragy which uses inserted view row to replace old view row. (In regular table,
reconciliation is at cell level. need to research more about the concurrent view update cases,
fow now, it looks fine). It also implies that every modification on base, view row will get
replaced entirely..
    
I will go ahead with -second way since there is an existing shadowable tombstone mechanism.-
 VirtualCells to avoid changing low level timestamp comparison..

{code}
    ColumnInfo: // generated from base column as it is.
        0. timestamp
        1. ttl 
        2. localDeletionTime:  could be used to represent tombstone or TTLed depends on if
there is ttl

        supersedes(): if timestamps are different, greater timestamp supersedes; if timestamps
are same, greater localDeletionTime supersedes.


    Row: // VirtualCells(keyOrConditions and unselected) are always merged with another row's
during row merging process

        // base column that are used in view pk or has filter condition on non-pk column.
        // if any column is not live, entire view row is wiped.
        // if a column in base is filtered and not selected, it's stored here.
        // during base modification, if a view row is removed due to base-column-in-view-pk
or filter-contiions, then no deletion is issue,
        // the virtual cell tombstone is added to Row's keyOrConditions.
        2. Map<ColumnIdentifier, ColumnInfo> keyOrConditions; 

        // if any column is live
        // during base modification, if base columns not selected in view is modified, then
no deletion is issue,
        // the virtual cell tombstone is added to Row's keyOrConditions.
        3. Map<ColumnIdentifier, ColumnInfo> unselected;

        // to determina if a row is dead
        isAliveRow():
            if any colummn in {{keyOrConditions}} is TTLed or tombstone(dead) or not existed,
false
            if {{timestamp or ttl}} are alive, true
            if any column in {{unselected}} is alive, true
            otherwise check any columns in view row are alive

        merge(Row): 
            // merge 3 parts separates
            a. for LivenessInfo/Deletion/Cells are merged as it is
            b. for keyOrConditions, merge by comparing ColumnInfo.supersedes()
            c. for unselected, same above

    ShadowableDeletion(now removed)
    Row.Deletion(now removed)
{code}


h3. Examples
(*_TL;DR;_* validate the model using different tests in each issue)

Reinserting previous deleted view row(11500)

{code}
CREATE TABLE t (k int PRIMARY KEY, a int, b int);
CREATE MATERIALIZED VIEW mv AS SELECT * FROM t WHERE k IS NOT NULL AND a IS NOT NULL PRIMARY
KEY (k, a);

{{q1}} INSERT INTO t(k, a, b) VALUES (1, 1, 1) USING TIMESTAMP 0;
{{q2}} UPDATE t USING TIMESTAMP 10 SET b = 2 WHERE k = 1;
{{q3}} UPDATE t USING TIMESTAMP 2 SET a = 2 WHERE k = 1; 
{{q4}} UPDATE t USING TIMESTAMP 3 SET a = 1 WHERE k = 1;

After {{q1}}:
    base: k=1@0, a=1@0, b=1@0    // 'k' is having value '1' with timestamp '0'
    view:
        sstable1:  VC(keyOrConditions{a@0}, unselected:{}) (k=1&&a=1)@liveness(ts@0)
b=1@0   //VC-> virtualCells

After {{q2}}:
    base(merged):   (k=1@0, a=1@0, b=2@10)
    view:
        sstable1:   VC(keyOrConditions{a@0}, unselected:{}) (k=1&&a=1)@liveness(ts@0)
b=1@0  
        sstable2:   VC(keyOrConditions{a@0}, unselected:{}) (k=1&&a=1)@liveness(no_ts)
b=2@10  // the VC here could be ommitted since it's not changed
        or merged:  VC(keyOrConditions{a@0}, unselected:{}) (k=1&&a=1)@liveness(ts@0)
b=2@10

After {{q3}}:
    base(merged):   (k=1@0, a=2@2, b=2@10)
    view:
        sstable1:   VC(keyOrConditions{a@0}, unselected:{}) (k=1&&a=1)@liveness(ts@0)
b=1@0 
        sstable2:   VC(keyOrConditions{a@0}, unselected:{}) (k=1&&a=1)@liveness(no_ts)
b=2@10  
        sstable3:  
                    VC(keyOrConditions{a@tb0}, unselected:{}) (k=1&&a=1)  // row deletion
caused by switch_entry
                    VC(keyOrConditions{a@2}, unselected:{}) (k=1&&a=2)@liveness(ts@0)
b=2@10
        or merged: 
                    VC(keyOrConditions{a@tb0}, unselected:{}) (k=1&&a=1) 
                    VC(keyOrConditions{a@2}, unselected:{}) (k=1&&a=2)@liveness(ts@0)
b=2@10

After {{q4}}:
    base(merged):   (k=1@0, a=1@3, b=2@10)
    view:
        sstable1:   VC(keyOrConditions{a@0}, unselected:{}) (k=1&&a=1)@liveness(ts@0)
b=1@0 
        sstable2:   VC(keyOrConditions{a@0}, unselected:{}) (k=1&&a=1)@liveness(no_ts)
b=2@10  
        sstable3:  
                    VC(keyOrConditions{a@tb0}, unselected:{}) (k=1&&a=1)
                    VC(keyOrConditions{a@2}, unselected:{}) (k=1&&a=2)@liveness(ts@0)
b=2@10
        sstable4:   
                    VC(keyOrConditions{a@3}, unselected:{}) (k=1&&a=1)@liveness(ts@0)
b=2@10
                    VC(keyOrConditions{a@tb2}, unselected:{}) (k=1&&a=2)
        or merged: 
                    VC(keyOrConditions{a@3}, unselected:{}) (k=1&&a=1)@liveness(ts@0)
b=2@10
                    VC(keyOrConditions{a@tb2}, unselected:{}) (k=1&&a=2)
{code}

based column used in view key is TTLed (13657)

{code}
CREATE TABLE t (k int, a int, b int, PRIMARY KEY (k));
CREATE MATERIALIZED VIEW mv AS SELECT * FROM t WHERE k IS NOT NULL AND a IS NOT NULL PRIMARY
KEY (a, k);

{{q1}} INSERT INTO t (k) VALUES (1);
{{q2}} UPDATE t USING TTL 5 SET a = 10 WHERE k = 1;
{{q3}} UPDATE t SET b = 100 WHERE k = 1;

After q1:
    base: k=1@t1
    view: no view updates generated because no existing view data

After q2:
    base(merged):  k=1@t1, a=10@(t2, ttl@5)
    view:          VC(keyOrConditions{a:(ts@t2, ttl@5) }, unselected:{}) (k=1&&a=10)@liveness(ts@t1)

After q2:
    base(merged):  k=1@t1, a=10@(t2, ttl@5), b=100@t3
    view:          
        sstable1:  VC(keyOrConditions{a:(ts@t2, ttl@5) }, unselected:{}) (k=1&&a=10)@liveness(ts@t1)
        sstable2:  VC(keyOrConditions{a:(ts@t2, ttl@5) }, unselected:{}) (k=1&&a=10)
b=100@t3
        or merged: VC(keyOrConditions{a:(ts@t2, ttl@5) }, unselected:{}) (k=1&&a=10)@liveness(ts@t1)
b=100@t3

5 seconds later, view row is considered removed becuase {{keyOrConditions-a}} is TTLed.

{code}


View row expires too fast with unselected base column (13127)

{code}

CREATE TABLE ks.base (p int, c int, v int, PRIMARY KEY (p, c)); 
CREATE MATERIALIZED VIEW ks.mv AS SELECT p, c FROM base WHERE p IS NOT NULL AND c IS NOT NULL
PRIMARY KEY (c, p); 

{{q1}} INSERT INTO ks.base (p, c) VALUES (0, 0) USING TTL 3; 
{{q2}} UPDATE ks.base USING TTL 100 SET v = 0 WHERE p = 0 and c = 0; 

After q1:
    base: (p=0&&c=0)@(ts@t1, ttl@3)
    view: VC(keyOrConditions{}, unselected:{}) (c=p&&p=0)@liveness(ts@t1, ttl@3)

After q2:
    base(merged):    (p=0&&c=0)@(ts@t1, ttl@3) v=0@(ts@t2, ttl@100)
    view: 
        sstable1:    VC(keyOrConditions{}, unselected:{}) (c=p&&p=0)@liveness(ts@t1,
ttl@3)
        sstable2:    VC(keyOrConditions{}, unselected:{v@(ts@t2, ttl@100) }) (c=p&&p=0)@liveness(ts@t1,
ttl@3)
        or merged:   VC(keyOrConditions{}, unselected:{v@(ts@t2, ttl@100) }) (c=p&&p=0)@liveness(ts@t1,
ttl@3)

after 5 second,
    base:  p,c,v-> 0,0,0
    view:  c,p  -> 0,0 because {{unselected has not TTLed column v}}

{code}

Partial update unselected columns in base (13127)

{code}
CREATE TABLE base (k int, c int, a int, b int, PRIMARY KEY (k, c));
CREATE MATERIALIZED VIEW mv AS SELECT k,c FROM base WHERE k IS NOT NULL AND c IS NOT NULL
PRIMARY KEY (k,c);

{{q1}} UPDATE base USING TIMESTAMP 10 SET b=1 WHERE k=1 AND c=1;
{{q2}} DELETE b FROM base USING TIMESTAMP 11 WHERE k=1 AND c=1;
{{q3}} UPDATE base USING TIMESTAMP 1 SET a=1 WHERE k=1 AND c=1;

After q1:
    base:   (k=1&&c=1),  b=1@10
    view:   VC(keyOrConditions{}, unselected:{b@(ts@10)}) (k=1&&c=1) 

After q2:
    base(merged):   (k=1&&c=1),  b@tombstone(ts@11)
    view:
        sstable1:   VC(keyOrConditions{}, unselected:{b@(ts@10)}) (k=1&&c=1) 
        sstable2:   VC(keyOrConditions{}, unselected:{b@(tb@11)}) (k=1&&c=1) 
        or merged:  VC(keyOrConditions{}, unselected:{b@(tb@11)}) (k=1&&c=1)  // no
view row

After q3:
    base(merged):   (k=1&&c=1),  b@tombstone(ts@11), c=1@1
    view:
        sstable1:   VC(keyOrConditions{}, unselected:{b@(ts@10)}) (k=1&&c=1) 
        sstable2:   VC(keyOrConditions{}, unselected:{b@(tb@11)}) (k=1&&c=1) 
        sstable3:   VC(keyOrConditions{}, unselected:{c@(ts@1)}) (k=1&&c=1)
        or merged:  VC(keyOrConditions{}, unselected:{b@(tb@11), c@(ts@1)}) (k=1&&c=1)
 // view row a live since one of {{unselected}} is live
{code}


merging should be commutative (13409)

{code}
create table ks.base (p int primary key, v1 int, v2 int);
create materialized view ks.my_view as select * from ks.base where p is not null and v1 is
not null primary key (v1, p); 

{{q1}} insert into ks.base (p, v1, v2) values (3, 1, 3) using timestamp 1; 
{{q2}} delete from ks.base using timestamp 2 where p = 3; 
{{q3} insert into ks.base (p, v1) values (3, 1) using timestamp 3;

at the end:
    base(merged): p=3@partition_deletion@2, livenesInfo@3, v1=1
    view:
        sstable1: VC(keyOrConditions{v1:(ts@0) }, unselected:{}) (v1=3&&p=3)@livenes(ts@1),
v2=3
        sstable2: (v1=3&&p=3)@tombstone(ts@2)
        sstable3: VC(keyOrConditions{v1:(ts@3) }, unselected:{}) (v1=3&&p=3)@livenes(ts@3,
keyOrConditions{v1:(ts@3) }, unselected:{})
        or merged: VC(keyOrConditions{v1:(ts@3) }, unselected:{}) (v1=3&&p=3)@livenes(ts@3,
keyOrConditions{v1:(ts@3) }, unselected:{}) @tombstone(ts@2)
{code}


{code}
create table ks.base (p int primary key, v1 int, v2 int);
create materialized view ks.my_view as select * from ks.base where p is not null and v1 is
not null primary key (v1, p); 

{{q1}} insert into base (p, v1, v2) values (3, 1, 3) using timestamp 1
{{q2}} update base using timestamp 2 set v2 = null where p = 3  
{{q3}} update base using timestamp 3  set v1 = 2 where p = 3 
{{q4}} update base using timestamp 4 set v1 = 1 where p = 3

at the end:
    base(merged): p=3@1, v1=1@4, v2@tombstone(ts@3)
    view:
        sstable1: VC(keyOrConditions{v1:(ts@1) }, unselected:{}) (v1=1&&p=3)@livenes(ts@1),
v2=3
        sstable2: (v1=1&&p=3) v2@tombstone(ts@2)   
        sstable3: 
                  VC(keyOrConditions{v1:(tb@1) }, unselected:{}) (v1=1&&p=3)
                  VC(keyOrConditions{v1:(ts@3) }, unselected:{}) (v1=2&&p=3)@livenes(ts@1),
v2@tombstone(ts@2)   
        sstable4:
                  VC(keyOrConditions{v1:(ts@4) }, unselected:{}) (v1=1&&p=3)@liveness(ts@1),
v2@tombstone(ts@2)
                  VC(keyOrConditions{v1: (tb@3)}, unselected:{}) (v1=2&&p=3) 

        or merged 2&3:        
            sstable1: VC(keyOrConditions{v1:(ts@1) }, unselected:{}) (v1=1&&p=3)@livenes(ts@1),
v2=3
            sstable5: 
                    VC(keyOrConditions{v1:(tb@1) }, unselected:{}) (v1=1&&p=3) v2@tombstone(ts@2)
  
                    VC(keyOrConditions{v1:(ts@3) }, unselected:{}) (v1=2&&p=3)@livenes(ts@1),
v2@tombstone(ts@2)   
            sstable4:
                    VC(keyOrConditions{v1:(ts@4) }, unselected:{}) (v1=1&&p=3)@liveness(ts@1),
v2@tombstone(ts@2)
                    VC(keyOrConditions{v1: (tb@3)}, unselected:{}) (v1=2&&p=3)   
   
        or merged all:
                    VC(keyOrConditions{v1:(ts@4) }, unselected:{}) (v1=1&&p=3)@liveness(ts@1),
v2@tombstone(ts@2)
                    VC(keyOrConditions{v1: (tb@3)}, unselected:{}) (v1=2&&p=3) v2@tombstone(ts@2)
             
{code}

{code}
create table ks.base (p int primary key, v1 int, v2 int);
create materialized view ks.my_view as select * from ks.base where p is not null and v1 is
not null primary key (v1, p); 

{{q1}} insert into base (p, v1, v2) values (3, 1, 3) using timestamp 1
{{q2}} delete from base using timestamp 2 where p = 3 
{{q3}} insert into base (p, v1) values (3, 1) using timestamp 3
{{q4}} update base using timestamp 4 set v1 = 2 where p = 3 // will create a shadowable row
tombstone for (v1, p) = (1, 3)
{{q5}} update base using timestamp 5 set v1 = 1 where p = 3

at the end:
    base(merged): p=3@partition_deletion(ts@2), livenesInfo@3, v1=1@5
    view:
        sstable1: VC(keyOrConditions{v1:(ts@1) }, unselected:{}) (v=1&&p=3)@livenes(ts@1)
v2=3
        sstable2: (v=1&&p=3)@tombstone(ts@2)  // normal deletion
        sstable3: VC(keyOrConditions{v1:(ts@3) }, unselected:{}) (v=1&&p=3)@liveness(ts@3)
        sstable4: 
                  VC(keyOrConditions{v1:(tb@3) }, unselected:{}) (v=1&&p=3)
                  VC(keyOrConditions{v1:(ts@4) }, unselected:{}) (v=2&&p=3)@liveness(ts@3)
        sstable5:
                  VC(keyOrConditions{v1:(ts@5) }, unselected:{}) (v=1&&p=3)@liveness(ts@3)
                  VC(keyOrConditions{v1:(tb@4) }, unselected:{}) (v=2&&p=3)
        or merged 2&4:
            sstable1: VC(keyOrConditions{v1:(ts@1) }, unselected:{}) (v=1&&p=3)@livenes(ts@1)
v2=3
            sstable3: VC(keyOrConditions{v1:(ts@3) }, unselected:{}) (v=1&&p=3)@liveness(ts@3)
            sstable6: 
                    VC(keyOrConditions{v1:(tb@3) }, unselected:{}) (v=1&&p=3)@tombstone(ts@2)
                    VC(keyOrConditions{v1:(ts@4) }, unselected:{}) (v=2&&p=3)@liveness(ts@3)
            sstable5:
                    VC(keyOrConditions{v1:(ts@5) }, unselected:{}) (v=1&&p=3)@liveness(ts@3)
                    VC(keyOrConditions{v1:(tb@4) }, unselected:{}) (v=2&&p=3)  
            then merged 3&6&5:
                sstable1: VC(keyOrConditions{v1:(ts@1) }, unselected:{}) (v=1&&p=3)@livenes(ts@1)
v2=3
                sstable7: 
                        VC(keyOrConditions{v1:(ts@5) }, unselected:{}) (v=1&&p=3)@liveness(ts@3)
@tombstone(ts@2)
                        VC(keyOrConditions{v1:(tb@4) }, unselected:{}) (v=2&&p=3)@liveness(ts@3)
                then merged 1&7:
                        VC(keyOrConditions{v1:(ts@5) }, unselected:{}) (v=1&&p=3)@liveness(ts@3)
@tombstone(ts@2)
                        VC(keyOrConditions{v1:(tb@4) }, unselected:{}) (v=2&&p=3)@liveness(ts@3)
                  
        or merged all:
                  VC(keyOrConditions{v1:(ts@5) }, unselected:{}) (v=1&&p=3)@liveness(ts@3)
@tombstone(ts@2)
                  VC(keyOrConditions{v1:(tb@4) }, unselected:{}) (v=2&&p=3)

{code}
 
with filter conditions (13547)

{code}
CREATE TABLE test.table1 ( id int, name text, enabled boolean, foo text, PRIMARY KEY (id,
name));
CREATE MATERIALIZED VIEW view1 AS SELECT id, name, foo FROM test.table1 WHERE id IS NOT NULL
AND name IS NOT NULL AND enabled = TRUE PRIMARY KEY ((name), id);
CREATE MATERIALIZED VIEW view2 AS SELECT * FROM test.table1 WHERE id IS NOT NULL AND name
IS NOT NULL AND enabled = TRUE PRIMARY KEY ((name), id);


{{q1}}  INSERT INTO test.table1 (id, name, enabled, foo) VALUES (1, 'One', TRUE, 'Bar'); 
// t1
{{q2}} UPDATE test.table1 SET enabled = FALSE WHERE id = 1 AND name = 'One';             
// t2
{{q3}} UPDATE test.table1 SET enabled = TRUE WHERE id = 1 AND name = 'One';              
// t3

At the end:
    base(merged): (id=1&&name='One')@t1, enabled=TRUE@t3, foo='Bar'
    View1:
        sstable1: VC(keyOrConditions{enabled:(ts@t1) }, unselected:{}) (id=1&&name='One')@liveness(ts@t1),
foo='bar'@t1
        sstable2: VC(keyOrConditions{enabled:(tb@t1) }, unselected:{}) (id=1&&name='One')
        sstable3: VC(keyOrConditions{enabled:(ts@t3) }, unselected:{}) (id=1&&name='One')@liveness(ts@t1),
foo='bar'@t1
        or merged: VC(keyOrConditions{enabled:(ts@t3) }, unselected:{}) (id=1&&name='One')@liveness(ts@t1),
foo='bar'@t1
    View2:
        sstable1: VC(keyOrConditions{enabled:(ts@t1) }, unselected:{}) (id=1&&name='One')@liveness(ts@t1),
enabled=True@t1, foo='bar'@t1
        sstable2: VC(keyOrConditions{enabled:(tb@t1) }, unselected:{}) (id=1&&name='One')
        sstable3: VC(keyOrConditions{enabled:(ts@t3) }, unselected:{}) (id=1&&name='One')@liveness(ts@t1),
enabled=True@t3, foo='bar'@t1
        or merged: VC(keyOrConditions{enabled:(ts@t3) }, unselected:{}) (id=1&&name='One')@liveness(ts@t1),
enabled=True@t3, foo='bar'@t1
{code}



was (Author: jasonstack):
h3. Relation: base -> view

First of all, I think all of us should agree on what cases view row should exists.

IMO, there are two main cases:

1. base pk and view pk are the same (order doesn't matter) and view has no filter conditions
or only conditions on base pk.
(filter condition mean: {{c = 1}} in view's where clause. filter condition is not a concern
here, since no previous view data to be cleared.)

view row exists if any of following is true:
* a. base row pk has live livenessInfo(timestamp) and base row pk satifies view's filter conditions
if any.
* b. or one of base row columns selected in view has live timestamp (via update) and base
row pk satifies view's filter conditions if any. this is handled by existing mechanism of
liveness and tombstone since all info are included in view row
* c. or one of base row columns not selected in view has live timestamp (via update) and base
row pk satifies view's filter conditions if any. Those unselected columns' timestamp/ttl/cell-deletion
info are not currently stored on view row.

2. base column used in view pk or view has filter conditions on base non-key column which
can also lead to entire view row being wiped.

view row exists if any of following is true:
* a. base row pk has live livenessInfo(timestamp) && base column used in view pk is
not null but no timestamp && conditions are satisfied. ( pk having live livenesInfo
means it is not deleted by tombstone)
* b. or base row column in view pk has timestamp (via update) && conditions are satisfied.
eg. if base column used in view pk is TTLed, entire view row should be wiped.

Next thing is to model "view's tombstone and livenessInfo" to maintain view data based on
above cases.
 
h3. Previous known issues: 
(I might miss some issues, feel free to ping me..)

ttl
* view row is not wiped when TTLed on base column used in view pk or TTLed on base non-key
column with filter condition
* cells with same timestamp, merging ttls are not deterministic.

partial update on base columns not selected in view
* it results in no view data. because of current update semantics, no view updates are generated
* corresponding view row' liveness is not depending on liveness of base columns

filter conditions or base column used in view pk causes
* view row is shadowed after a few modification on base column used in view pk if the base
non-key column has TS greater than base pk's ts and view key column's ts. (as mentioned by
sylvain: we need to be able to re-insert an entry when a prior one had been deleted need to
be careful to hanlde timestamp tie)

tombstone merging is not commutative
* in current code, shadowable tombstone doesn't co-exist with regular tombstone

sstabledump not supporting current shadowable tombstone

h3. Model

I can think of two ways to ship all required base column info to view:
    * make base columns that are not selected in view as "virtual cell" and store their imestamp/ttl
to view without their actual values. so we can reuse current ts/tb/ttl mechanism with additional
validation logic to check if a view row is alive.
    * or storing those info on view's livenessInfo/deletion with addition merge logic to make
sure view liveness/deletion are ordered properly even in the case of timestamp tie. It's like
a replacement stragy which uses inserted view row to replace old view row. (In regular table,
reconciliation is at cell level. need to research more about the concurrent view update cases,
fow now, it looks fine). It also implies that every modification on base, view row will get
replaced entirely..
    
I will go ahead with ~second way since there is an existing shadowable tombstone mechanism.~
 VirtualCells..

{code}
    ColumnInfo: // generated from base column as it is.
        0. timestamp
        1. ttl 
        2. localDeletionTime:  could be used to represent tombstone or TTLed depends on if
there is ttl

        supersedes(): if timestamps are different, greater timestamp supersedes; if timestamps
are same, greater localDeletionTime supersedes.


    Row: // VirtualCells(keyOrConditions and unselected) are always merged with another row's
during row merging process

        // base column that are used in view pk or has filter condition on non-pk column.
        // if any column is not live, entire view row is wiped.
        // if a column in base is filtered and not selected, it's stored here.
        // during base modification, if a view row is removed due to base-column-in-view-pk
or filter-contiions, then no deletion is issue,
        // the virtual cell tombstone is added to Row's keyOrConditions.
        2. Map<ColumnIdentifier, ColumnInfo> keyOrConditions; 

        // if any column is live
        // during base modification, if base columns not selected in view is modified, then
no deletion is issue,
        // the virtual cell tombstone is added to Row's keyOrConditions.
        3. Map<ColumnIdentifier, ColumnInfo> unselected;

        // to determina if a row is dead
        isAliveRow():
            if any colummn in {{keyOrConditions}} is TTLed or tombstone(dead) or not existed,
false
            if {{timestamp or ttl}} are alive, true
            if any column in {{unselected}} is alive, true
            otherwise check any columns in view row are alive

        merge(Row): 
            // merge 3 parts separates
            a. for LivenessInfo/Deletion/Cells are merged as it is
            b. for keyOrConditions, merge by comparing ColumnInfo.supersedes()
            c. for unselected, same above

    ShadowableDeletion(now removed)
    Row.Deletion(now removed)
{code}


h3. Examples
(*_TL;DR;_* validate the model using different tests in each issue)

Reinserting previous deleted view row(11500)

{code}
CREATE TABLE t (k int PRIMARY KEY, a int, b int);
CREATE MATERIALIZED VIEW mv AS SELECT * FROM t WHERE k IS NOT NULL AND a IS NOT NULL PRIMARY
KEY (k, a);

{{q1}} INSERT INTO t(k, a, b) VALUES (1, 1, 1) USING TIMESTAMP 0;
{{q2}} UPDATE t USING TIMESTAMP 10 SET b = 2 WHERE k = 1;
{{q3}} UPDATE t USING TIMESTAMP 2 SET a = 2 WHERE k = 1; 
{{q4}} UPDATE t USING TIMESTAMP 3 SET a = 1 WHERE k = 1;

After {{q1}}:
    base: k=1@0, a=1@0, b=1@0    // 'k' is having value '1' with timestamp '0'
    view:
        sstable1:  VC(keyOrConditions{a@0}, unselected:{}) (k=1&&a=1)@liveness(ts@0)
b=1@0   //VC-> virtualCells

After {{q2}}:
    base(merged):   (k=1@0, a=1@0, b=2@10)
    view:
        sstable1:   VC(keyOrConditions{a@0}, unselected:{}) (k=1&&a=1)@liveness(ts@0)
b=1@0  
        sstable2:   VC(keyOrConditions{a@0}, unselected:{}) (k=1&&a=1)@liveness(no_ts)
b=2@10  // the VC here could be ommitted since it's not changed
        or merged:  VC(keyOrConditions{a@0}, unselected:{}) (k=1&&a=1)@liveness(ts@0)
b=2@10

After {{q3}}:
    base(merged):   (k=1@0, a=2@2, b=2@10)
    view:
        sstable1:   VC(keyOrConditions{a@0}, unselected:{}) (k=1&&a=1)@liveness(ts@0)
b=1@0 
        sstable2:   VC(keyOrConditions{a@0}, unselected:{}) (k=1&&a=1)@liveness(no_ts)
b=2@10  
        sstable3:  
                    VC(keyOrConditions{a@tb0}, unselected:{}) (k=1&&a=1)  // row deletion
caused by switch_entry
                    VC(keyOrConditions{a@2}, unselected:{}) (k=1&&a=2)@liveness(ts@0)
b=2@10
        or merged: 
                    VC(keyOrConditions{a@tb0}, unselected:{}) (k=1&&a=1) 
                    VC(keyOrConditions{a@2}, unselected:{}) (k=1&&a=2)@liveness(ts@0)
b=2@10

After {{q4}}:
    base(merged):   (k=1@0, a=1@3, b=2@10)
    view:
        sstable1:   VC(keyOrConditions{a@0}, unselected:{}) (k=1&&a=1)@liveness(ts@0)
b=1@0 
        sstable2:   VC(keyOrConditions{a@0}, unselected:{}) (k=1&&a=1)@liveness(no_ts)
b=2@10  
        sstable3:  
                    VC(keyOrConditions{a@tb0}, unselected:{}) (k=1&&a=1)
                    VC(keyOrConditions{a@2}, unselected:{}) (k=1&&a=2)@liveness(ts@0)
b=2@10
        sstable4:   
                    VC(keyOrConditions{a@3}, unselected:{}) (k=1&&a=1)@liveness(ts@0)
b=2@10
                    VC(keyOrConditions{a@tb2}, unselected:{}) (k=1&&a=2)
        or merged: 
                    VC(keyOrConditions{a@3}, unselected:{}) (k=1&&a=1)@liveness(ts@0)
b=2@10
                    VC(keyOrConditions{a@tb2}, unselected:{}) (k=1&&a=2)
{code}

based column used in view key is TTLed (13657)

{code}
CREATE TABLE t (k int, a int, b int, PRIMARY KEY (k));
CREATE MATERIALIZED VIEW mv AS SELECT * FROM t WHERE k IS NOT NULL AND a IS NOT NULL PRIMARY
KEY (a, k);

{{q1}} INSERT INTO t (k) VALUES (1);
{{q2}} UPDATE t USING TTL 5 SET a = 10 WHERE k = 1;
{{q3}} UPDATE t SET b = 100 WHERE k = 1;

After q1:
    base: k=1@t1
    view: no view updates generated because no existing view data

After q2:
    base(merged):  k=1@t1, a=10@(t2, ttl@5)
    view:          VC(keyOrConditions{a:(ts@t2, ttl@5) }, unselected:{}) (k=1&&a=10)@liveness(ts@t1)

After q2:
    base(merged):  k=1@t1, a=10@(t2, ttl@5), b=100@t3
    view:          
        sstable1:  VC(keyOrConditions{a:(ts@t2, ttl@5) }, unselected:{}) (k=1&&a=10)@liveness(ts@t1)
        sstable2:  VC(keyOrConditions{a:(ts@t2, ttl@5) }, unselected:{}) (k=1&&a=10)
b=100@t3
        or merged: VC(keyOrConditions{a:(ts@t2, ttl@5) }, unselected:{}) (k=1&&a=10)@liveness(ts@t1)
b=100@t3

5 seconds later, view row is considered removed becuase {{keyOrConditions-a}} is TTLed.

{code}


View row expires too fast with unselected base column (13127)

{code}

CREATE TABLE ks.base (p int, c int, v int, PRIMARY KEY (p, c)); 
CREATE MATERIALIZED VIEW ks.mv AS SELECT p, c FROM base WHERE p IS NOT NULL AND c IS NOT NULL
PRIMARY KEY (c, p); 

{{q1}} INSERT INTO ks.base (p, c) VALUES (0, 0) USING TTL 3; 
{{q2}} UPDATE ks.base USING TTL 100 SET v = 0 WHERE p = 0 and c = 0; 

After q1:
    base: (p=0&&c=0)@(ts@t1, ttl@3)
    view: VC(keyOrConditions{}, unselected:{}) (c=p&&p=0)@liveness(ts@t1, ttl@3)

After q2:
    base(merged):    (p=0&&c=0)@(ts@t1, ttl@3) v=0@(ts@t2, ttl@100)
    view: 
        sstable1:    VC(keyOrConditions{}, unselected:{}) (c=p&&p=0)@liveness(ts@t1,
ttl@3)
        sstable2:    VC(keyOrConditions{}, unselected:{v@(ts@t2, ttl@100) }) (c=p&&p=0)@liveness(ts@t1,
ttl@3)
        or merged:   VC(keyOrConditions{}, unselected:{v@(ts@t2, ttl@100) }) (c=p&&p=0)@liveness(ts@t1,
ttl@3)

after 5 second,
    base:  p,c,v-> 0,0,0
    view:  c,p  -> 0,0 because {{unselected has not TTLed column v}}

{code}

Partial update unselected columns in base (13127)

{code}
CREATE TABLE base (k int, c int, a int, b int, PRIMARY KEY (k, c));
CREATE MATERIALIZED VIEW mv AS SELECT k,c FROM base WHERE k IS NOT NULL AND c IS NOT NULL
PRIMARY KEY (k,c);

{{q1}} UPDATE base USING TIMESTAMP 10 SET b=1 WHERE k=1 AND c=1;
{{q2}} DELETE b FROM base USING TIMESTAMP 11 WHERE k=1 AND c=1;
{{q3}} UPDATE base USING TIMESTAMP 1 SET a=1 WHERE k=1 AND c=1;

After q1:
    base:   (k=1&&c=1),  b=1@10
    view:   VC(keyOrConditions{}, unselected:{b@(ts@10)}) (k=1&&c=1) 

After q2:
    base(merged):   (k=1&&c=1),  b@tombstone(ts@11)
    view:
        sstable1:   VC(keyOrConditions{}, unselected:{b@(ts@10)}) (k=1&&c=1) 
        sstable2:   VC(keyOrConditions{}, unselected:{b@(tb@11)}) (k=1&&c=1) 
        or merged:  VC(keyOrConditions{}, unselected:{b@(tb@11)}) (k=1&&c=1)  // no
view row

After q3:
    base(merged):   (k=1&&c=1),  b@tombstone(ts@11), c=1@1
    view:
        sstable1:   VC(keyOrConditions{}, unselected:{b@(ts@10)}) (k=1&&c=1) 
        sstable2:   VC(keyOrConditions{}, unselected:{b@(tb@11)}) (k=1&&c=1) 
        sstable3:   VC(keyOrConditions{}, unselected:{c@(ts@1)}) (k=1&&c=1)
        or merged:  VC(keyOrConditions{}, unselected:{b@(tb@11), c@(ts@1)}) (k=1&&c=1)
 // view row a live since one of {{unselected}} is live
{code}


merging should be commutative (13409)

{code}
create table ks.base (p int primary key, v1 int, v2 int);
create materialized view ks.my_view as select * from ks.base where p is not null and v1 is
not null primary key (v1, p); 

{{q1}} insert into ks.base (p, v1, v2) values (3, 1, 3) using timestamp 1; 
{{q2}} delete from ks.base using timestamp 2 where p = 3; 
{{q3} insert into ks.base (p, v1) values (3, 1) using timestamp 3;

at the end:
    base(merged): p=3@partition_deletion@2, livenesInfo@3, v1=1
    view:
        sstable1: VC(keyOrConditions{v1:(ts@0) }, unselected:{}) (v1=3&&p=3)@livenes(ts@1),
v2=3
        sstable2: (v1=3&&p=3)@tombstone(ts@2)
        sstable3: VC(keyOrConditions{v1:(ts@3) }, unselected:{}) (v1=3&&p=3)@livenes(ts@3,
keyOrConditions{v1:(ts@3) }, unselected:{})
        or merged: VC(keyOrConditions{v1:(ts@3) }, unselected:{}) (v1=3&&p=3)@livenes(ts@3,
keyOrConditions{v1:(ts@3) }, unselected:{}) @tombstone(ts@2)
{code}


{code}
create table ks.base (p int primary key, v1 int, v2 int);
create materialized view ks.my_view as select * from ks.base where p is not null and v1 is
not null primary key (v1, p); 

{{q1}} insert into base (p, v1, v2) values (3, 1, 3) using timestamp 1
{{q2}} update base using timestamp 2 set v2 = null where p = 3  
{{q3}} update base using timestamp 3  set v1 = 2 where p = 3 
{{q4}} update base using timestamp 4 set v1 = 1 where p = 3

at the end:
    base(merged): p=3@1, v1=1@4, v2@tombstone(ts@3)
    view:
        sstable1: VC(keyOrConditions{v1:(ts@1) }, unselected:{}) (v1=1&&p=3)@livenes(ts@1),
v2=3
        sstable2: (v1=1&&p=3) v2@tombstone(ts@2)   
        sstable3: 
                  VC(keyOrConditions{v1:(tb@1) }, unselected:{}) (v1=1&&p=3)
                  VC(keyOrConditions{v1:(ts@3) }, unselected:{}) (v1=2&&p=3)@livenes(ts@1),
v2@tombstone(ts@2)   
        sstable4:
                  VC(keyOrConditions{v1:(ts@4) }, unselected:{}) (v1=1&&p=3)@liveness(ts@1),
v2@tombstone(ts@2)
                  VC(keyOrConditions{v1: (tb@3)}, unselected:{}) (v1=2&&p=3) 

        or merged 2&3:        
            sstable1: VC(keyOrConditions{v1:(ts@1) }, unselected:{}) (v1=1&&p=3)@livenes(ts@1),
v2=3
            sstable5: 
                    VC(keyOrConditions{v1:(tb@1) }, unselected:{}) (v1=1&&p=3) v2@tombstone(ts@2)
  
                    VC(keyOrConditions{v1:(ts@3) }, unselected:{}) (v1=2&&p=3)@livenes(ts@1),
v2@tombstone(ts@2)   
            sstable4:
                    VC(keyOrConditions{v1:(ts@4) }, unselected:{}) (v1=1&&p=3)@liveness(ts@1),
v2@tombstone(ts@2)
                    VC(keyOrConditions{v1: (tb@3)}, unselected:{}) (v1=2&&p=3)   
   
        or merged all:
                    VC(keyOrConditions{v1:(ts@4) }, unselected:{}) (v1=1&&p=3)@liveness(ts@1),
v2@tombstone(ts@2)
                    VC(keyOrConditions{v1: (tb@3)}, unselected:{}) (v1=2&&p=3) v2@tombstone(ts@2)
             
{code}

{code}
create table ks.base (p int primary key, v1 int, v2 int);
create materialized view ks.my_view as select * from ks.base where p is not null and v1 is
not null primary key (v1, p); 

{{q1}} insert into base (p, v1, v2) values (3, 1, 3) using timestamp 1
{{q2}} delete from base using timestamp 2 where p = 3 
{{q3}} insert into base (p, v1) values (3, 1) using timestamp 3
{{q4}} update base using timestamp 4 set v1 = 2 where p = 3 // will create a shadowable row
tombstone for (v1, p) = (1, 3)
{{q5}} update base using timestamp 5 set v1 = 1 where p = 3

at the end:
    base(merged): p=3@partition_deletion(ts@2), livenesInfo@3, v1=1@5
    view:
        sstable1: VC(keyOrConditions{v1:(ts@1) }, unselected:{}) (v=1&&p=3)@livenes(ts@1)
v2=3
        sstable2: (v=1&&p=3)@tombstone(ts@2)  // normal deletion
        sstable3: VC(keyOrConditions{v1:(ts@3) }, unselected:{}) (v=1&&p=3)@liveness(ts@3)
        sstable4: 
                  VC(keyOrConditions{v1:(tb@3) }, unselected:{}) (v=1&&p=3)
                  VC(keyOrConditions{v1:(ts@4) }, unselected:{}) (v=2&&p=3)@liveness(ts@3)
        sstable5:
                  VC(keyOrConditions{v1:(ts@5) }, unselected:{}) (v=1&&p=3)@liveness(ts@3)
                  VC(keyOrConditions{v1:(tb@4) }, unselected:{}) (v=2&&p=3)
        or merged 2&4:
            sstable1: VC(keyOrConditions{v1:(ts@1) }, unselected:{}) (v=1&&p=3)@livenes(ts@1)
v2=3
            sstable3: VC(keyOrConditions{v1:(ts@3) }, unselected:{}) (v=1&&p=3)@liveness(ts@3)
            sstable6: 
                    VC(keyOrConditions{v1:(tb@3) }, unselected:{}) (v=1&&p=3)@tombstone(ts@2)
                    VC(keyOrConditions{v1:(ts@4) }, unselected:{}) (v=2&&p=3)@liveness(ts@3)
            sstable5:
                    VC(keyOrConditions{v1:(ts@5) }, unselected:{}) (v=1&&p=3)@liveness(ts@3)
                    VC(keyOrConditions{v1:(tb@4) }, unselected:{}) (v=2&&p=3)  
            then merged 3&6&5:
                sstable1: VC(keyOrConditions{v1:(ts@1) }, unselected:{}) (v=1&&p=3)@livenes(ts@1)
v2=3
                sstable7: 
                        VC(keyOrConditions{v1:(ts@5) }, unselected:{}) (v=1&&p=3)@liveness(ts@3)
@tombstone(ts@2)
                        VC(keyOrConditions{v1:(tb@4) }, unselected:{}) (v=2&&p=3)@liveness(ts@3)
                then merged 1&7:
                        VC(keyOrConditions{v1:(ts@5) }, unselected:{}) (v=1&&p=3)@liveness(ts@3)
@tombstone(ts@2)
                        VC(keyOrConditions{v1:(tb@4) }, unselected:{}) (v=2&&p=3)@liveness(ts@3)
                  
        or merged all:
                  VC(keyOrConditions{v1:(ts@5) }, unselected:{}) (v=1&&p=3)@liveness(ts@3)
@tombstone(ts@2)
                  VC(keyOrConditions{v1:(tb@4) }, unselected:{}) (v=2&&p=3)

{code}
 
with filter conditions (13547)

{code}
CREATE TABLE test.table1 ( id int, name text, enabled boolean, foo text, PRIMARY KEY (id,
name));
CREATE MATERIALIZED VIEW view1 AS SELECT id, name, foo FROM test.table1 WHERE id IS NOT NULL
AND name IS NOT NULL AND enabled = TRUE PRIMARY KEY ((name), id);
CREATE MATERIALIZED VIEW view2 AS SELECT * FROM test.table1 WHERE id IS NOT NULL AND name
IS NOT NULL AND enabled = TRUE PRIMARY KEY ((name), id);


{{q1}}  INSERT INTO test.table1 (id, name, enabled, foo) VALUES (1, 'One', TRUE, 'Bar'); 
// t1
{{q2}} UPDATE test.table1 SET enabled = FALSE WHERE id = 1 AND name = 'One';             
// t2
{{q3}} UPDATE test.table1 SET enabled = TRUE WHERE id = 1 AND name = 'One';              
// t3

At the end:
    base(merged): (id=1&&name='One')@t1, enabled=TRUE@t3, foo='Bar'
    View1:
        sstable1: VC(keyOrConditions{enabled:(ts@t1) }, unselected:{}) (id=1&&name='One')@liveness(ts@t1),
foo='bar'@t1
        sstable2: VC(keyOrConditions{enabled:(tb@t1) }, unselected:{}) (id=1&&name='One')
        sstable3: VC(keyOrConditions{enabled:(ts@t3) }, unselected:{}) (id=1&&name='One')@liveness(ts@t1),
foo='bar'@t1
        or merged: VC(keyOrConditions{enabled:(ts@t3) }, unselected:{}) (id=1&&name='One')@liveness(ts@t1),
foo='bar'@t1
    View2:
        sstable1: VC(keyOrConditions{enabled:(ts@t1) }, unselected:{}) (id=1&&name='One')@liveness(ts@t1),
enabled=True@t1, foo='bar'@t1
        sstable2: VC(keyOrConditions{enabled:(tb@t1) }, unselected:{}) (id=1&&name='One')
        sstable3: VC(keyOrConditions{enabled:(ts@t3) }, unselected:{}) (id=1&&name='One')@liveness(ts@t1),
enabled=True@t3, foo='bar'@t1
        or merged: VC(keyOrConditions{enabled:(ts@t3) }, unselected:{}) (id=1&&name='One')@liveness(ts@t1),
enabled=True@t3, foo='bar'@t1
{code}


> Obsolete MV entry may not be properly deleted
> ---------------------------------------------
>
>                 Key: CASSANDRA-11500
>                 URL: https://issues.apache.org/jira/browse/CASSANDRA-11500
>             Project: Cassandra
>          Issue Type: Bug
>          Components: Materialized Views
>            Reporter: Sylvain Lebresne
>            Assignee: ZhaoYang
>
> When a Materialized View uses a non-PK base table column in its PK, if an update changes
that column value, we add the new view entry and remove the old one. When doing that removal,
the current code uses the same timestamp than for the liveness info of the new entry, which
is the max timestamp for any columns participating to the view PK. This is not correct for
the deletion as the old view entry could have other columns with higher timestamp which won't
be deleted as can easily shown by the failing of the following test:
> {noformat}
> CREATE TABLE t (k int PRIMARY KEY, a int, b int);
> CREATE MATERIALIZED VIEW mv AS SELECT * FROM t WHERE k IS NOT NULL AND a IS NOT NULL
PRIMARY KEY (k, a);
> INSERT INTO t(k, a, b) VALUES (1, 1, 1) USING TIMESTAMP 0;
> UPDATE t USING TIMESTAMP 4 SET b = 2 WHERE k = 1;
> UPDATE t USING TIMESTAMP 2 SET a = 2 WHERE k = 1;
> SELECT * FROM mv WHERE k = 1; // This currently return 2 entries, the old (invalid) and
the new one
> {noformat}
> So the correct timestamp to use for the deletion is the biggest timestamp in the old
view entry (which we know since we read the pre-existing base row), and that is what CASSANDRA-11475
does (the test above thus doesn't fail on that branch).
> Unfortunately, even then we can still have problems if further updates requires us to
overide the old entry. Consider the following case:
> {noformat}
> CREATE TABLE t (k int PRIMARY KEY, a int, b int);
> CREATE MATERIALIZED VIEW mv AS SELECT * FROM t WHERE k IS NOT NULL AND a IS NOT NULL
PRIMARY KEY (k, a);
> INSERT INTO t(k, a, b) VALUES (1, 1, 1) USING TIMESTAMP 0;
> UPDATE t USING TIMESTAMP 10 SET b = 2 WHERE k = 1;
> UPDATE t USING TIMESTAMP 2 SET a = 2 WHERE k = 1; // This will delete the entry for a=1
with timestamp 10
> UPDATE t USING TIMESTAMP 3 SET a = 1 WHERE k = 1; // This needs to re-insert an entry
for a=1 but shouldn't be deleted by the prior deletion
> UPDATE t USING TIMESTAMP 4 SET a = 2 WHERE k = 1; // ... and we can play this game more
than once
> UPDATE t USING TIMESTAMP 5 SET a = 1 WHERE k = 1;
> ...
> {noformat}
> In a way, this is saying that the "shadowable" deletion mechanism is not general enough:
we need to be able to re-insert an entry when a prior one had been deleted before, but we
can't rely on timestamps being strictly bigger on the re-insert. In that sense, this can be
though as a similar problem than CASSANDRA-10965, though the solution there of a single flag
is not enough since we can have to replace more than once.
> I think the proper solution would be to ship enough information to always be able to
decide when a view deletion is shadowed. Which means that both liveness info (for updates)
and shadowable deletion would need to ship the timestamp of any base table column that is
part the view PK (so {{a}} in the example below).  It's doable (and not that hard really),
but it does require a change to the sstable and intra-node protocol, which makes this a bit
painful right now.
> But I'll also note that as CASSANDRA-1096 shows, the timestamp is not even enough since
on equal timestamp the value can be the deciding factor. So in theory we'd have to ship the
value of those columns (in the case of a deletion at least since we have it in the view PK
for updates). That said, on that last problem, my preference would be that we start prioritizing
CASSANDRA-6123 seriously so we don't have to care about conflicting timestamp anymore, which
would make this problem go away.



--
This message was sent by Atlassian JIRA
(v6.4.14#64029)


---------------------------------------------------------------------
To unsubscribe, e-mail: commits-unsubscribe@cassandra.apache.org
For additional commands, e-mail: commits-help@cassandra.apache.org


Mime
View raw message