Dead Letter Channel

- -

Camel supports the Dead Letter Channel from the EIP patterns using the DeadLetterChannel processor which is an Error Handler.

- -

+

Dead Letter Channel

Camel supports the Dead Letter Channel from the EIP patterns using the DeadLetterChannel processor which is an Error Handler.

Difference between Dead Letter Channel and Default Error Handler

Icon

- -

The major difference is that Dead Letter Channel has a dead letter queue that whenever an Exchange could not be processed is moved to. It will always move failed exchanges to this queue.

- -

Unlike the Default Error Handler that does not have a dead letter queue. So whenever an Exchange could not be processed the error is propagated back to the client.

- -

Notice: You can adjust this behavior of whether the client should be notified or not with the handled option.

+

The major difference is that Dead Letter Channel has a dead letter queue that whenever an Exchange could not be processed is moved to. It will always move failed exchanges to this queue.

Unlike the Default Error Handler that does not have a dead letter queue. So whenever an Exchange could not be processed the error is propagated back to the client.

Notice: You can adjust this behavior of whether the client should be notified or not with the handled option.

When the DeadLetterChannel moves a message to the dead letter endpoint, then if any new exceptions is thrown during that process, then by default the dead letter channel will handle the new exception as well. This ensures that the De adLetterChannel will always succeed. From Camel 2.15 onwards this behavior can be changed by setting the option deadLetterHandleNewException=false. Then if a new exception is thrown, then the dead letter channel will fail and propagate back that new exception (which is the behavior of the default error handler). When a new exception occurs then the dead letter channel logs this at WARN level. This can be turned off by setting logNewException=false.

- - -

Redelivery

- -

It is common for a temporary outage or database deadlock to cause a message to fail to process; but the chances are if its tried a few more times with some time delay then it will complete fine. So we typically wish to use some kind of redelivery policy to decide how many times to try redeliver a message and how long to wait before redelivery attempts.

- -

The RedeliveryPolicy defines how the message is to be redelivered. You can customize things like

- -

how many times a message is attempted to be redelivered before it is considered a failure and sent to the dead letter channel
the initial redelivery timeout
whether or not exponential backoff is used (i.e. the time between retries increases using a backoff multiplier)
whether to use collision avoidance to add some randomness to the timings
delay pattern (see below for details)
Camel 2.11: whether to allow redelivery during stopping/shutdown

- - -

Once all attempts at redelivering the message fails then the message is forwarded to the dead letter queue.

- -

About moving Exchange to dead letter queue and using handled

-

Handled on Dead Letter Channel

- -

When all attempts of redelivery have failed the Exchange is moved to the dead letter queue (the dead letter endpoint). The exchange is then complete and from the client point of view it was processed. As such the Dead Letter Channel have handled the Exchange.

- -

For instance configuring the dead letter channel as:

- -

Using the Fluent Builders

- -

-
-

- -

Using the Spring XML Extensions

- -

-
-

- -

The Dead Letter Channel above will clear the caused exception (setException(null)), by moving the caused exception to a property on the Exchange, with the key Exchange.EXCEPTION_CAUGHT. Then the Exchange is moved to the "jms:queue:dead" destination and the client will not notice the failure.

- -

About moving Exchange to dead letter queue and using the original message

-

The option useOriginalMessage is used for routing the original input message instead of the current message that potentially is modified during routing.

- -

For instance if you have this route:

-

-
-

-

The route listen for JMS messages and validates, transforms and handle it. During this the Exchange payload is transformed/modified. So in case something goes wrong and we want to move the message to another JMS destination, then we can configure our Dead Letter Channel with the useOriginalMessage option. But when we move the Exchange to this destination we do not know in which state the message is in. Did the error happen in before the transformOrder or after? So to be sure we want to move the original input message we received from jms:queue:order:input. So we can do this by enabling the useOriginalMessage option as shown below:

-

-
-

- -

Then the messages routed to the jms:queue:dead is the original input. If we want to manually retry we can move the JMS message from the failed to the input queue, with no problem as the message is the same as the original we received.

- - -

OnRedelivery

- -

When Dead Letter Channel is doing redeliver its possible to configure a Processor that is executed just before every redelivery attempt. This can be used for the situations where you need to alter the message before its redelivered. See below for sample.

- -

+

Then the messages routed to the jms:queue:dead is the original input. If we want to manually retry we can move the JMS message from the failed to the input queue, with no problem as the message is the same as the original we received.

OnRedelivery

When Dead Letter Channel is doing redeliver its possible to configure a Processor that is executed just before every redelivery attempt. This can be used for the situations where you need to alter the message before its redelivered. See below for sample.

onException and onRedeliver

Icon

- -

We also support for per onException to set a onRedeliver. That means you can do special on redelivery for different exceptions, as opposed to onRedelivery set on Dead Letter Channel can be viewed as a global scope.

+

We also support for per onException to set a onRedeliver. That means you can do special on redelivery for different exceptions, as opposed to onRedelivery set on Dead Letter Channel can be viewed as a global scope.

- - - -

Redelivery default values

-

Redelivery is disabled by default.

- -

The default redeliver policy will use the following values:

-

maximumRedeliveries=0
redeliverDelay=1000L (1 second)
maximumRedeliveryDelay = 60 * 1000L (60 seconds)
And the exponential backoff and collision avoidance is turned off.
The retriesExhaustedLogLevel are set to LoggingLevel.ERROR
The retryAttemptedLogLevel are set to LoggingLevel.DEBUG
Stack traces is logged for exhausted messages from Camel 2.2 onwards.
Handled exceptions is not logged from Camel 2.3 onwards

- - -

The maximum redeliver delay ensures that a delay is never longer than the value, default 1 minute. This can happen if you turn on the exponential backoff.

- -

The maximum redeliveries is the number of re delivery attempts. By default Camel will try to process the exchange 1 + 5 times. 1 time for the normal attempt and then 5 attempts as redeliveries.
-Setting the maximumRedeliveries to a negative value such as -1 will then always redelivery (unlimited).
-Setting the maximumRedeliveries to 0 will disable any re delivery attempt.

- -

Camel will log delivery failures at the DEBUG logging level by default. You can change this by specifying retriesExhaustedLogLevel and/or retryAttemptedLogLevel. See ExceptionBuilderWithRetryLoggingLevelSetTest for an example.

- -

You can turn logging of stack traces on/off. If turned off Camel will still log the redelivery attempt. Its just much less verbose.

- -

Redeliver Delay Pattern

-

Delay pattern is used as a single option to set a range pattern for delays. If used then the following options does not apply: (delay, backOffMultiplier, useExponentialBackOff, useCollisionAvoidance, maximumRedeliveryDelay).

- -

The idea is to set groups of ranges using the following syntax: limit:delay;limit 2:delay 2;limit 3:delay 3;...;limit N:delay N

- -

Each group has two values separated with colon

-

limit = upper limit
delay = delay in millis
-And the groups is again separated with semi colon.
-The rule of thumb is that the next groups should have a higher limit than the previous group.

- - -

Lets clarify this with an example:
-delayPattern=5:1000;10:5000;20:20000

- -

That gives us 3 groups:

-

5:1000
10:5000
20:20000

- - -

Resulting in these delays for redelivery attempt:

-

Redelivery attempt number 1..4 = 0 millis (as the first group start with 5)
Redelivery attempt number 5..9 = 1000 millis (the first group)
Redelivery attempt number 10..19 = 5000 millis (the second group)
Redelivery attempt number 20.. = 20000 millis (the last group)

- - -

Note: The first redelivery attempt is 1, so the first group should start with 1 or higher.

- -

You can start a group with limit 1 to eg have a starting delay: delayPattern=1:1000;5:5000

-

Redelivery attempt number 1..4 = 1000 millis (the first group)
Redelivery attempt number 5.. = 5000 millis (the last group)

- - -

There is no requirement that the next delay should be higher than the previous. You can use any delay value you like. For example with delayPattern=1:5000;3:1000 we start with 5 sec delay and then later reduce that to 1 second.

- -

Redelivery header

- -

When a message is redelivered the DeadLetterChannel will append a customizable header to the message to indicate how many times its been redelivered.
-Before Camel 2.6: The header is CamelRedeliveryCounter, which is also defined on the Exchange.REDELIVERY_COUNTER.
-Starting with 2.6: The header CamelRedeliveryMaxCounter, which is also defined on the Exchange.REDELIVERY_MAX_COUNTER, contains the maximum redelivery setting. This header is absent if you use retryWhile or have unlimited maximum redelivery configured.

- -

And a boolean flag whether it is being redelivered or not (first attempt)
-The header CamelRedelivered contains a boolean if the message is redelivered or not, which is also defined on the Exchange.REDELIVERED.

- -

Dynamically calculated delay from the exchange
-In Camel 2.9 and 2.8.2: The header is CamelRedeliveryDelay, which is also defined on the Exchange.REDELIVERY_DELAY.
-Is this header is absent, normal redelivery rules apply.

- -

Which endpoint failed

-

Available as of Camel 2.1

- -

When Camel routes messages it will decorate the Exchange with a property that contains the last endpoint Camel send the Exchange to:

-

-
-

-

The Exchange.TO_ENDPOINT have the constant value CamelToEndpoint.

- -

This information is updated when Camel sends a message to any endpoint. So if it exists its the last endpoint which Camel send the Exchange to.

- -

When for example processing the Exchange at a given Endpoint and the message is to be moved into the dead letter queue, then Camel also decorates the Exchange with another property that contains that last endpoint:

-

-
-

-

The Exchange.FAILURE_ENDPOINT have the constant value CamelFailureEndpoint.

- -

This allows for example you to fetch this information in your dead letter queue and use that for error reporting.
-This is useable if the Camel route is a bit dynamic such as the dynamic Recipient List so you know which endpoints failed.

- -

Notice: These information is kept on the Exchange even if the message was successfully processed by a given endpoint, and then later fails for example in a local Bean processing instead. So beware that this is a hint that helps pinpoint errors.

- -

-
-

- -

Now suppose the route above and a failure happens in the foo bean. Then the Exchange.TO_ENDPOINT and Exchange.FAILURE_ENDPOINT will still contain the value of http://someserver/somepath.

- - -

Which route failed

-

Available as of Camel 2.10.4/2.11

- -

When Camel error handler handles an error such as Dead Letter Channel or using Exception Clause with handled=true, then Camel will decorate
-the Exchange with the route id where the error occurred.

- -

-
-

-

The Exchange.FAILURE_ROUTE_ID have the constant value CamelFailureRouteId.

- -

This allows for example you to fetch this information in your dead letter queue and use that for error reporting.

- - -

Control if redelivery is allowed during stopping/shutdown

-

Available as of Camel 2.11

- -

Prior to Camel 2.10, Camel will perform redelivery while stopping a route, or shutting down Camel. This has improved a bit in Camel 2.10 onwards, as Camel will not perform redelivery attempts when shutting down aggressively (eg during Graceful Shutdown and timeout hit). From Camel 2.11 onwards there is a new option allowRedeliveryWhileStopping which you can use to control if redelivery is allowed or not; notice that any in progress redelivery will still be executed. This option can only disallow any redelivery to be executed after the stopping of a route/shutdown of Camel has been triggered. If a redelivery is dissallowed then a RejectedExcutionException is set on the Exchange and the processing of the Exchange stops. This means any consumer will see the Exchange as f ailed due the RejectedExecutionException.

- -

The default value is true to be backwards compatible as before. For example the following sample shows how to do this with Java DSL and XML DSL

-

+

The Exchange.FAILURE_ROUTE_ID have the constant value CamelFailureRouteId.

This allows for example you to fetch this information in your dead letter queue and use that for error reporting.

Control if redelivery is allowed during stopping/shutdown

Available as of Camel 2.11

Prior to Camel 2.10, Camel will perform redelivery while stopping a route, or shutting down Camel. This has improved a bit in Camel 2.10 onwards, as Camel will not perform redelivery attempts when shutting down aggressively (eg during Graceful Shutdown and timeout hit). From Camel 2.11 onwards there is a new option allowRedeliveryWhileStopping which you can use to control if redelivery is allowed or not; notice that any in progress redelivery will still be executed. This option can only disallow any redelivery to be executed after the stopping of a route/shutdown of Camel has been triggered. If a redelivery is dissallowed then a RejectedExcutionException is set on the Exchange and the processing of the Exchange stops. This means any consumer will see the Exchange as failed due the RejectedExecutionException.

The default value is true to be backwards compatible as before. For example the following sample shows how to do this with Java DSL and XML DSL

-

- -

And the sample sample with XML DSL

-

+

And the sample sample with XML DSL

-

- - -

Samples

-

The following example shows how to configure the Dead Letter Channel configuration using the DSL

-

+

Samples

The following example shows how to configure the Dead Letter Channel configuration using the DSL

-

- -

You can also configure the RedeliveryPolicy as this example shows

-

+

You can also configure the RedeliveryPolicy as this example shows

-

- -

How can I modify the Exchange before redelivery?

-

We support directly in Dead Letter Channel to set a Processor that is executed before each redelivery attempt.

- -

When Dead Letter Channel is doing redeliver its possible to configure a Processor that is executed just before every redelivery attempt. This can be used for the situations where you need to alter the message before its redelivered.

- -

Here we configure the Dead Letter Channel to use our processor MyRedeliveryProcessor to be executed before each redelivery.

-

+

How can I modify the Exchange before redelivery?

We support directly in Dead Letter Channel to set a Processor that is executed before each redelivery attempt.

When Dead Letter Channel is doing redeliver its possible to configure a Processor that is executed just before every redelivery attempt. This can be used for the situations where you need to alter the message before its redelivered.

Here we configure the Dead Letter Channel to use our processor MyRedeliveryProcessor to be executed before each redelivery.

-

- -

And this is the processor MyRedeliveryProcessor where we alter the message.

-

+

And this is the processor MyRedeliveryProcessor where we alter the message.

-

- -

Using This Pattern

+