axis-c-user mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From "Sreenivasulu Gelle" <sreenivasulu.ge...@sap.com>
Subject RE: hello_svc.c Example Compile Problem
Date Thu, 15 May 2008 18:47:32 GMT

-----Original Message-----
From: Samisa Abeysinghe [mailto:samisa@wso2.com] 
Sent: Thursday, May 15, 2008 11:41 AM
To: Apache AXIS C User List
Subject: Re: hello_svc.c Example Compile Problem

Sreenivasulu Gelle wrote:
>
> HI All,
>
> I'm trying to build axis-c(1.3.0) on* Solaris 10* UISNG* SunStudio11* 
> Compiler in* 64-bit mode*. And I'm getting lot of compilation errors.
>

What are the problems that you run into? Have you raised a Jira issue on

this?

[Srini] asking for stdint.h, getop.h which are seen in Linux not in
Solaris with SunStudio compiler.

> I would like to know which compilers are supported to build AXIS-C 
> source code. Does it build with only GCC compiler??
>

gcc is the main compiler used apart form MS VC cl, based on what the 
developers have access to.

AFAIK, there are few users who have used Axis2/C with gcc on Solaris. I 
am not sure what version, may be 9 or 10. Anyone using please raise your

hands :)

[Srini] My Question is is there any user compiled with SunStudio
compiler???


If you point to the problems, I am sure we can help.

> In next 2 weeks I'm planning to build on HPUX 64-bit and AIX 64-bit
also.
>

I am not sure on HPUX, but I have seen couple of users question about 
AIX time to time. Again I am not sure how far they went. However, if you

run into problems and report them, we should be able to help as well.

[Srini]
Even in AIX is any body compiled with visual age CPP(xlC_r)



Thanks,
Samisa...

> So your input helps me a lot in planning my activities.
>
> Thanks
>
> -Srini
>
>
>
>
> -----Original Message-----
> From: Samisa Abeysinghe [mailto:samisa@wso2.com]
> Sent: Thursday, May 15, 2008 11:19 AM
> To: Apache AXIS C User List
> Subject: Re: hello_svc.c Example Compile Problem
>
> To me it looks as if it cannot locate some of the headers, some system
>
> headers.
>
> Can you double check the includes please?
>
> Also, does echo work for you? If so, you can try and compile echo
>
> service and look for the compile options used in there.
>
> Thanks,
>
> Samisa...
>
> Andreas Karseras wrote:
>
> > Hi,
>
> >
>
> > I am seeing a problem when compiling the hello_svc.c source file
from 
> the Axis2/C Manual with release 1.4.0.
>
> > The hello.c compiles without a problem.
>
> >
>
> > The problem appears to concern axutil_utils_defines.h - an example
of 
> the errors and warning are as follows:-
>
> >
>
> > D:/axis2c/include/axutil_utils_defines.h:37: error: syntax error 
> before "uint8_t"
>
> > D:/axis2c/include/axutil_utils_defines.h:37: warning: type defaults 
> to `int' in declaration of `uint8_t'
>
> > D:/axis2c/include/axutil_utils_defines.h:37: warning: data
definition 
> has no type or storage class
>
> >
>
> > The iconv.dll, zlib1.dll and libxml2.dll libraries have all been 
> downloaded and placed in axis2c\lib.
>
> >
>
> > The Axis server successfully starts when I issue the 
> axis2_http_server.exe command.
>
> >
>
> > Any suggestions on what I'm doing wrong ?
>
> >
>
> >
>
> > Andy
>
> >
>
> > For completeness, I have attached the complete compiler output
below.
>
> >
>
> >
>
> > **** Build of configuration Debug for project C++ ****
>
> >
>
> > **** Internal Builder is used for build               ****
>
> > gcc
>
> > -ID:\MinGW\include -ID:\MinGW\lib -ID:\axis2c\lib
-ID:\axis2c\include
>
> > -O0 -g3 -Wall -c -fmessage-length=0 -v -ohello_svc.o ..\hello_svc.c
>
> > Reading specs from D:/MinGW/bin/../lib/gcc/mingw32/3.4.5/specs
>
> > Configured
>
> > with: ../gcc-3.4.5-20060117-3/configure --with-gcc --with-gnu-ld
>
> > --with-gnu-as --host=mingw32 --target=mingw32 --prefix=/mingw
>
> > --enable-threads --disable-nls
>
> > --enable-languages=c,c++,f77,ada,objc,java --disable-win32-registry
>
> > --disable-shared --enable-sjlj-exceptions --enable-libgcj
>
> > --disable-java-awt --without-x --enable-java-gc=boehm
>
> > --disable-libgcj-debug --enable-interpreter
>
> > --enable-hash-synchronization --enable-libstdcxx-debug
>
> > Thread model: win32
>
> > gcc version 3.4.5 (mingw-vista special r3)
>
> > D:/MinGW/bin/../libexec/gcc/mingw32/3.4.5/cc1.exe
>
> > -quiet -v -ID:\MinGW\include -ID:\MinGW\lib -ID:\axis2c\lib
>
> > -ID:\axis2c\include -iprefix D:\MinGW\bin/../lib/gcc/mingw32/3.4.5/
-dD
>
> > ..\hello_svc.c -quiet -dumpbase hello_svc.c -auxbase-strip
hello_svc.o
>
> > -g3 -O0 -Wall -version -fmessage-length=0 -o
>
> > D:\Profiles\KARSERAS\LOCALS~1\Temp/ccKuMzQi.s
>
> > ignoring nonexistent directory 
> "D:/MinGW/bin/../lib/gcc/mingw32/3.4.5/../../../../mingw32/include"
>
> > ignoring nonexistent directory 
> "/mingw/lib/gcc/mingw32/3.4.5/../../../../mingw32/include"
>
> > #include "..." search starts here:
>
> > #include <...> search starts here:
>
> > D:/MinGW/include
>
> > D:/MinGW/lib
>
> > D:/axis2c/lib
>
> > D:/axis2c/include
>
> > D:/MinGW/bin/../lib/gcc/mingw32/3.4.5/../../../../include
>
> > D:/MinGW/bin/../lib/gcc/mingw32/3.4.5/include
>
> > /mingw/lib/gcc/mingw32/3.4.5/../../../../include
>
> > /mingw/include
>
> > /mingw/lib/gcc/mingw32/3.4.5/include
>
> > /mingw/include
>
> > End of search list.
>
> > GNU C version 3.4.5 (mingw-vista special r3) (mingw32)
>
> >     compiled by GNU C version 3.4.5 (mingw-vista special r3).
>
> > GGC heuristics: --param ggc-min-expand=100 --param 
> ggc-min-heapsize=131072
>
> > In file included from D:/axis2c/include/axutil_allocator.h:26,
>
> >                  from D:/axis2c/include/axutil_env.h:27,
>
> >                  from D:/axis2c/include/axiom_node.h:39,
>
> >                  from D:/axis2c/include/axis2_svc_skeleton.h:41,
>
> >                  from ..\hello_svc.c:16:
>
> > D:/axis2c/include/axutil_utils_defines.h:37: error: syntax error 
> before "uint8_t"
>
> > D:/axis2c/include/axutil_utils_defines.h:37: warning: type defaults 
> to `int' in declaration of `uint8_t'
>
> > D:/axis2c/include/axutil_utils_defines.h:37: warning: data
definition 
> has no type or storage class
>
> > D:/axis2c/include/axutil_utils_defines.h:38: error: syntax error 
> before "int8_t"
>
> > D:/axis2c/include/axutil_utils_defines.h:38: warning: type defaults 
> to `int' in declaration of `int8_t'
>
> > D:/axis2c/include/axutil_utils_defines.h:38: warning: data
definition 
> has no type or storage class
>
> > D:/axis2c/include/axutil_utils_defines.h:39: error: syntax error 
> before "uint16_t"
>
> > D:/axis2c/include/axutil_utils_defines.h:39: warning: type defaults 
> to `int' in declaration of `uint16_t'
>
> > D:/axis2c/include/axutil_utils_defines.h:39: warning: data
definition 
> has no type or storage class
>
> > D:/axis2c/include/axutil_utils_defines.h:40: error: syntax error 
> before "int16_t"
>
> > D:/axis2c/include/axutil_utils_defines.h:40: warning: type defaults 
> to `int' in declaration of `int16_t'
>
> > D:/axis2c/include/axutil_utils_defines.h:40: warning: data
definition 
> has no type or storage class
>
> > D:/axis2c/include/axutil_utils_defines.h:41: error: syntax error 
> before "uint32_t"
>
> > D:/axis2c/include/axutil_utils_defines.h:41: warning: type defaults 
> to `int' in declaration of `uint32_t'
>
> > D:/axis2c/include/axutil_utils_defines.h:41: warning: data
definition 
> has no type or storage class
>
> > D:/axis2c/include/axutil_utils_defines.h:42: error: syntax error 
> before "int32_t"
>
> > D:/axis2c/include/axutil_utils_defines.h:42: warning: type defaults 
> to `int' in declaration of `int32_t'
>
> > D:/axis2c/include/axutil_utils_defines.h:42: warning: data
definition 
> has no type or storage class
>
> > D:/axis2c/include/axutil_utils_defines.h:43: error: syntax error 
> before "uint64_t"
>
> > D:/axis2c/include/axutil_utils_defines.h:43: warning: type defaults 
> to `int' in declaration of `uint64_t'
>
> > D:/axis2c/include/axutil_utils_defines.h:43: warning: data
definition 
> has no type or storage class
>
> > D:/axis2c/include/axutil_utils_defines.h:44: error: syntax error 
> before "int64_t"
>
> > D:/axis2c/include/axutil_utils_defines.h:44: warning: type defaults 
> to `int' in declaration of `int64_t'
>
> > D:/axis2c/include/axutil_utils_defines.h:44: warning: data
definition 
> has no type or storage class
>
> > Build error occurred, build is stopped
>
> > Time consumed: 1673  ms. 
>
> >
>
> >
>
> >
>
> >      
>
> >
>
> >
---------------------------------------------------------------------
>
> > To unsubscribe, e-mail: axis-c-user-unsubscribe@ws.apache.org
>
> > For additional commands, e-mail: axis-c-user-help@ws.apache.org
>
> >  
>
> >
------------------------------------------------------------------------
>
> >
>
> >
>
> > No virus found in this incoming message.
>
> > Checked by AVG.
>
> > Version: 8.0.100 / Virus Database: 269.23.16/1434 - Release Date: 
> 5/15/2008 7:24 AM
>
> >  
>
>
> -- 
>
> Samisa Abeysinghe
>
> Director, Engineering; WSO2 Inc.
>
> http://www.wso2.com/ - "The Open Source SOA Company"
>
>
> ---------------------------------------------------------------------
>
> To unsubscribe, e-mail: axis-c-user-unsubscribe@ws.apache.org
>
> For additional commands, e-mail: axis-c-user-help@ws.apache.org
>
>
------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG. 
> Version: 8.0.100 / Virus Database: 269.23.16/1434 - Release Date:
5/15/2008 7:24 AM
>   


-- 
Samisa Abeysinghe 
Director, Engineering; WSO2 Inc.

http://www.wso2.com/ - "The Open Source SOA Company"


---------------------------------------------------------------------
To unsubscribe, e-mail: axis-c-user-unsubscribe@ws.apache.org
For additional commands, e-mail: axis-c-user-help@ws.apache.org


Mime
View raw message