axis-c-dev mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From <indra.sha...@sungard.com>
Subject SV: Axis2/c source in VS
Date Fri, 19 Sep 2008 08:29:08 GMT
Here are the *.vcproj and axis2c.sln
Let me know if there is anything else you need.


/Indra

-----Ursprungligt meddelande-----
Från: Supun Kamburugamuva [mailto:supun06@gmail.com]
Skickat: to 2008-09-18 16:22
Till: Apache AXIS C Developers List
Ämne: Re: Axis2/c source in VS
 
Yes, That would be nice.

Supun..

On Thu, Sep 18, 2008 at 7:00 PM, <indra.sharma@sungard.com> wrote:

> Btw, du you want me to send you my axis2c.sln for VS2008?
>
> /Indra
>
>
> -----Ursprungligt meddelande-----
> Från: Supun Kamburugamuva [mailto:supun06@gmail.com]
> Skickat: to 2008-09-18 11:41
> Till: Apache AXIS C Developers List
> Ämne: Re: Axis2/c source in VS
>
> You are using VS 2008. We don't have any experience with VS 2008 and
> Axis2/C. When we move from VS 2003 to VS 2005 one problem that we
> encountered was the project property character set. By default it was set
> to
> unicord. But Axis2/C doesn't support uncode and uses multibye character
> set.
> After changing that everything worked well.
>
> Supun.
>
> On Thu, Sep 18, 2008 at 2:27 PM, <indra.sharma@sungard.com> wrote:
>
> > That's strange because when I was compiling the compiler was complaining
> > about not beeing able to find libcur_imp.lib was missing. This was before
> I
> > put enable_libcurl = 0.
> >
> >
> > -----Ursprungligt meddelande-----
> > Från: Supun Kamburugamuva [mailto:supun06@gmail.com]
> > Skickat: to 2008-09-18 11:25
> > Till: Apache AXIS C Developers List
> > Ämne: Re: Axis2/c source in VS
> >
> > AFAIK what you did doesn't have any effect. By default libcul is
> disabled.
> > If you want to enable libcurl you need to define the preprocessor
> directive
> > AXIS2_LIBCURL_ENABLED. You can check weather you are linking to libcurl
> by
> > using the depends.exe that comes with VS.
> >
> > Supun..
> >
> > On Thu, Sep 18, 2008 at 2:15 PM, <indra.sharma@sungard.com> wrote:
> >
> > > It might also be good to know that I have enable_libcurl = 0 in NR2. I
> > did
> > > it by adding enable_libcurl =0 in my preprocessor settings and removing
> > > libcurl_imp from properties -> Linker -> Input -> additional
> > dependencies.
> > >
> > > /Indra
> > >
> > >
> > > -----Ursprungligt meddelande-----
> > > Från: Supun Kamburugamuva [mailto:supun06@gmail.com]
> > > Skickat: to 2008-09-18 11:05
> > > Till: Apache AXIS C Developers List
> > > Ämne: Re: Axis2/c source in VS
> > >
> > > Did you try to run the NR2 from the command line?
> > >
> > > On Thu, Sep 18, 2008 at 2:00 PM, <indra.sharma@sungard.com> wrote:
> > >
> > > > Yes, I have it in the lib folder.
> > > >
> > > > I have 2 axis2_http_server.exe, one that is working and one that is
> not
> > > > working.
> > > > The one that is working i compiled with the instructions from the
> > webpage
> > > > with nmake and that .exe runs fine and i will call it NR1. The one I
> > have
> > > > compiled in VS is the one with an .exe that's not starting and I will
> > > call
> > > > it NR2. I tried to exchange just axutil.dll generated for NR1 with
> the
> > > > axutil.dll for NR2 and then NR1s' server (.exe) runs fine. So I guess
> > > that
> > > > something is wrong generating the axutil.dll...
> > > >
> > > > /Indra
> > > >
> > > > -----Ursprungligt meddelande-----
> > > > Från: Supun Kamburugamuva [mailto:supun06@gmail.com]
> > > > Skickat: to 2008-09-18 10:50
> > > > Till: Apache AXIS C Developers List
> > > > Ämne: Re: Axis2/c source in VS
> > > >
> > > > Sorry I have misspelled the axis2_http_sender.dll as
> > > > axis2_http_library.dll.
> > > > Do you have the axis2_http_sender.dll?
> > > >
> > > > Supun..
> > > >
> > > > On Thu, Sep 18, 2008 at 1:40 PM, <indra.sharma@sungard.com> wrote:
> > > >
> > > > > I have tried to build it in VS and it works, no compiling errors.
> The
> > > > > problem is when I try to run the .exe that is generated. I have
> > OpenSSL
> > > > > installed and the axis2c lib-files.
> > > > >
> > > > > When I compile and run from the comand promt with nmake (as
> described
> > > on
> > > > > the webpage but without libcurl, enable_libcurl=0) it works and the
> > > .exe
> > > > > starts, but I need to get it working using VS environment. I don't
> > have
> > > > any
> > > > > library called axis2_http_library.dll in any project, not the one
> > > working
> > > > > nor the one I'm having trouble with...
> > > > >
> > > > >
> > > > > -----Ursprungligt meddelande-----
> > > > > Från: Supun Kamburugamuva [mailto:supun06@gmail.com]
> > > > > Skickat: to 2008-09-18 10:38
> > > > > Till: Apache AXIS C Developers List
> > > > > Ämne: Re: Axis2/c source in VS
> > > > >
> > > > > Try to build the visual studio solution again and see what is the
> > > error.
> > > > > You
> > > > > need OpenSLL installed and configured for building the sender from
> > the
> > > > > visual studio. You need OpenSSL include files and library files
> > > included
> > > > > for
> > > > > the axis2_http_sender project.
> > > > >
> > > > > Supun.
> > > > >
> > > > >
> > > > >
> > > > > On Thu, Sep 18, 2008 at 1:22 PM, <indra.sharma@sungard.com>
wrote:
> > > > >
> > > > > > Hi Supun!
> > > > > > Thank you for your reply.
> > > > > > I've checked for the library named axis2_http_library but I
can't
> > > find
> > > > > one.
> > > > > > It seems I don't have it but I don't know why, do you?
> > > > > >
> > > > > >
> > > > > >
> > > > > > /Indra
> > > > > >
> > > > > >
> > > > > > -----Ursprungligt meddelande-----
> > > > > > Från: Supun Kamburugamuva [mailto:supun06@gmail.com]
> > > > > > Skickat: on 2008-09-17 18:25
> > > > > > Till: Apache AXIS C Developers List
> > > > > > Ämne: Re: Axis2/c source in VS
> > > > > >
> > > > > > Also please make sure that the axis2_http_sender.dll is in the
> lib
> > > > folder
> > > > > > of
> > > > > > Axis2/C build.
> > > > > >
> > > > > > Supun..
> > > > > >
> > > > > > On Wed, Sep 17, 2008 at 8:47 PM, Supun Kamburugamuva <
> > > > supun06@gmail.com
> > > > > > >wrote:
> > > > > >
> >
> > > > > > > I think the problem is with the axis2_http_library.dll.
Please
> > make
> > > > > sure
> > > > > > > that all the libraries that are linked to this dll are
in the
> > PATH.
> > > > > > >
> > > > > > > Supun..
> > > > > > >
> > > > > > >
> > > > > > > On Wed, Sep 17, 2008 at 7:58 PM, Supun Kamburugamuva <
> > > > > supun06@gmail.com
> > > > > > >wrote:
> > > > > > >
> > > > > > >> Did you set the working directory? If you are running
from the
> > VS
> > > > > > solution
> > > > > > >> you should set the current working directory.
> > > > > > >>
> > > > > > >> Supun.
> > > > > > >>
> > > > > > >> On Wed, Sep 17, 2008 at 7:39 PM, <indra.sharma@sungard.com>
> > > wrote:
> > > > > > >>
> > > > > > >>> Hello,
> > > > > > >>> I'm trying to compile axis2/c in Visual Studios
(2008) (using
> > > > > > axis2c.sln)
> > > > > > >>> and it works out well in both release (and debug
mode). I'm
> > only
> > > > > using
> > > > > > these
> > > > > > >>> projects: axutil, axis2_parser, axiom, neethi,
axis2_engine,
> > > > > > >>> axis2_http_sender, axis2_httpreceiver, axis2_http_server,
> > > > > > axis2_mod_addr.
> > > > > > >>> I'm having trouble to start the server.
> > > > > > >>>
> > > > > > >>> When I try to run the server wich was compiled
in release
> mode
> > it
> > > > > > doesn't
> > > > > > >>> start and the log sais:pu
> > > > > > >>>
> > > > > > >>>
> > > > > > >>> [Wed Sep 17 16:16:20 2008] [info]  Starting Axis2
HTTP
> > server....
> > > > > > >>> [Wed Sep 17 16:16:20 2008] [info]  Apache Axis2/C
version in
> > use
> > > :
> > > > > > 1.5.0
> > > > > > >>> [Wed Sep 17 16:16:20 2008] [info]  Server port
: 9090
> > > > > > >>> [Wed Sep 17 16:16:20 2008] [info]  Repo location
: ../
> > > > > > >>> [Wed Sep 17 16:16:20 2008] [info]  Read Timeout
: 60000 ms
> > > > > > >>> [Wed Sep 17 16:16:20 2008] [debug]
> > > > > > >>> ..\..\..\..\src\core\engine\phase.c(121) axis2_handler_t
> > > > > > >>> *request_uri_based_dispatcher added to the index
0 of the
> phase
> > > > > > Transport
> > > > > > >>> [Wed Sep 17 16:16:20 2008] [debug]
> > > > > > >>> ..\..\..\..\src\core\engine\phase.c(121) axis2_handler_t
> > > > > > >>> *addressing_based_dispatcher added to the index
1 of the
> phase
> > > > > > Transport
> > > > > > >>> [Wed Sep 17 16:16:20 2008] [debug]
> > > > > > >>> ..\..\..\..\src\core\engine\phase.c(121) axis2_handler_t
> > > > > > *rest_dispatcher
> > > > > > >>> added to the index 0 of the phase Dispatch
> > > > > > >>> [Wed Sep 17 16:16:20 2008] [debug]
> > > > > > >>> ..\..\..\..\src\core\engine\phase.c(121) axis2_handler_t
> > > > > > >>> *soap_message_body_based_dispatcher added to the
index 1 of
> the
> > > > phase
> > > > > > >>> Dispatch
> > > > > > >>> [Wed Sep 17 16:16:20 2008] [debug]
> > > > > > >>> ..\..\..\..\src\core\engine\phase.c(121) axis2_handler_t
> > > > > > >>> *soap_action_based_dispatcher added to the index
2 of the
> phase
> > > > > > Dispatch
> > > > > > >>> [Wed Sep 17 16:16:20 2008] [debug]
> > > > > > >>> ..\..\..\..\src\core\engine\phase.c(121) axis2_handler_t
> > > > > > >>> *dispatch_post_conditions_evaluator added to the
index 0 of
> the
> > > > phase
> > > > > > >>> PostDispatch
> > > > > > >>> [Wed Sep 17 16:16:20 2008] [debug]
> > > > > > >>> ..\..\..\..\src\core\engine\phase.c(121) axis2_handler_t
> > > > > > *context_handler
> > > > > > >>> added to the index 1 of the phase PostDispatch
> > > > > > >>> [Wed Sep 17 16:16:20 2008] [debug]
> > > > > > >>> ..\..\..\..\src\core\deployment\conf_builder.c(233)
No custom
> > > > > > dispatching
> > > > > > >>> order found. Continue with the default dispatching
order
> > > > > > >>> [Wed Sep 17 16:16:20 2008] [debug]
> > > > > > >>> ..\..\..\..\src\core\deployment\conf_builder.c(378)
Module
> > > > addressing
> > > > > > found
> > > > > > >>> in axis2.xml
> > > > > > >>> [Wed Sep 17 16:16:20 2008] [error]
> > > > > > >>> ..\..\..\..\util\src\class_loader.c(167) Loading
shared
> library
> > > > > > >>> ..//lib/axis2_http_sender.dll  Failed. DLERROR
IS DLL Load
> > Error
> > > > 126:
> > > > > T
> > > > > > >>> [Wed Sep 17 16:16:20 2008] [error]
> > > > > > >>> ..\..\..\..\src\core\deployment\conf_builder.c(898)
Transport
> > > > sender
> > > > > is
> > > > > > NULL
> > > > > > >>> for transport http, unable to continue
> > > > > > >>> [Wed Sep 17 16:16:20 2008] [error]
> > > > > > >>> ..\..\..\..\src\core\deployment\conf_builder.c(261)
> Processing
> > > > > > transport
> > > > > > >>> senders failed, unable to continue
> > > > > > >>> [Wed Sep 17 16:16:20 2008] [error]
> > > > > > >>> ..\..\..\..\src\core\deployment\dep_engine.c(752)
Populating
> > > Axis2
> > > > > > >>> Configuration failed
> > > > > > >>> [Wed Sep 17 16:16:20 2008] [error]
> > > > > > >>> ..\..\..\..\src\core\deployment\conf_init.c(64)
Loading
> > > deployment
> > > > > > engine
> > > > > > >>> failed for repository ../.
> > > > > > >>> [Wed Sep 17 16:16:20 2008] [error]
> > > > > > >>>
> > ..\..\..\..\src\core\transport\http\receiver\http_receiver.c(127)
> > > > > > unable to
> > > > > > >>> create private configuration contextfor repo path
../
> > > > > > >>> [Wed Sep 17 16:16:20 2008] [error]
> > > > > > >>>
> > > > > >
> > > > >
> > > >
> > >
> >
> ..\..\..\..\src\core\transport\http\server\simple_axis2_server\http_server_main.c(215)
> > > > > > >>> Server creation failed: Error code: 101 :: Failed
in creating
> > DLL
> > > > > > >>>
> > > > > > >>>
> > > > > > >>>
> > > > > > >>>
> > > > > > >>> I have tested to fix this and then discovered that
something
> > > seems
> > > > to
> > > > > > be
> > > > > > >>> wrong with the axutil.dll...
> > > > > > >>> Does anyone know what might be wrong?
> > > > > > >>>
> > > > > > >>> Sincerely
> > > > > > >>> Indra Sharma
> > > > > > >>>
> > > > > > >>>
> > > > > > >>>
> > > > ---------------------------------------------------------------------
> > > > > > >>> To unsubscribe, e-mail: axis-c-dev-unsubscribe@ws.apache.org
> > > > > > >>> For additional commands, e-mail:
> axis-c-dev-help@ws.apache.org
> > > > > > >>>
> > > > > > >>>
> > > > > > >>
> > > > > > >>
> > > > > > >> --
> > > > > > >> Software Engineer, WSO2 Inc
> > > > > > >> http://wso2.com
> > > > > > >>
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > --
> > > > > > > Software Engineer, WSO2 Inc
> > > > > > > http://wso2.com
> > > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > --
> > > > > > Software Engineer, WSO2 Inc
> > > > > > http://wso2.com
> > > > > >


> > > > > >
> > > > > >
> > ---------------------------------------------------------------------
> > > > > > To unsubscribe, e-mail: axis-c-dev-unsubscribe@ws.apache.org
> > > > > > For additional commands, e-mail: axis-c-dev-help@ws.apache.org
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Software Engineer, WSO2 Inc
> > > > > http://wso2.org
> > > > >
> > > > >
> > > > >
> ---------------------------------------------------------------------
> > > > > To unsubscribe, e-mail: axis-c-dev-unsubscribe@ws.apache.org
> > > > > For additional commands, e-mail: axis-c-dev-help@ws.apache.org
> > > > >
> > > >
> > > >
> > > >
> > > > --
> > > > Software Engineer, WSO2 Inc
> > > > http://wso2.org
> > > >
> > > >
> > > > ---------------------------------------------------------------------
> > > > To unsubscribe, e-mail: axis-c-dev-unsubscribe@ws.apache.org
> > > > For additional commands, e-mail: axis-c-dev-help@ws.apache.org
> > > >
> > >
> > >
> > >
> > > --
> > > Software Engineer, WSO2 Inc
> > > http://wso2.org
> > >
> > >
> > > ---------------------------------------------------------------------
> > > To unsubscribe, e-mail: axis-c-dev-unsubscribe@ws.apache.org
> > > For additional commands, e-mail: axis-c-dev-help@ws.apache.org
> > >
> >
> >
> >
> > --
> > Software Engineer, WSO2 Inc
> > http://wso2.org
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: axis-c-dev-unsubscribe@ws.apache.org
> > For additional commands, e-mail: axis-c-dev-help@ws.apache.org
> >
>
>
>
> --
> Software Engineer, WSO2 Inc
> http://wso2.org
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: axis-c-dev-unsubscribe@ws.apache.org
> For additional commands, e-mail: axis-c-dev-help@ws.apache.org
>



-- 
Software Engineer, WSO2 Inc
http://wso2.org



Mime
View raw message