axis-c-dev mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From "Thilina Gunarathne" <cset...@gmail.com>
Subject Re: New method for creating xml_reader
Date Tue, 15 Jul 2008 16:57:50 GMT
> From the Thilina's explanations this is what I got. We read the input
> stream until the end of the soap and give this to the XML parser (we can
> find the end of soap by finding the starting of the mime boundary). Since we
> are reading the XML stream we can create a buffered XML reader instead of an
> IO reader. AFAIK this is the only feasible solution that I can see that
> works in both parsers.
>
As I mentioned above, If we need we can be more smart by streaming the SOAP
part until user requests another MIME part, in which case we need to buffer
the rest of the SOAP part. We need to hide the above from the XML parser..
But this needs more complex work.

thanks.
Thilina


>
> Supun..
>
> On Tue, Jul 15, 2008 at 3:26 PM, Thilina Gunarathne <csethil@gmail.com>
> wrote:
>
>> Hi Manjula,
>> One thing you guys can try to do is to break up the stream at the MIME
>> parser level. Then the MIME parser only gives the SOAP Envelope part to the
>> XML parser and nothing beyond. This can be achieved by faking a input
>> stream. MIME parser gets the original input stream and then gives the XML
>> parser a faked inputstream, something which provides the same interface and
>> functionality as the original inputstream, but the  MIME parser has control
>> over what goes in to it.
>>
>> For an example, if reading an InputStream is reading a memory pointer
>> (please excuse my very bad knowledge about C I/O) which gets filled by the
>> transport layer, then the MIME parser can also write the data in to some
>> memory location  which will act as the input stream location for XMLReader.
>>
>> If the above is possible, then the MIME parser can stream the actual input
>> stream directly to the faked inputstream till the SOAP part boundary is
>> reached or till the user requests another MIME part. Streaming MIME parsing
>> will happen throughout the process to limit the FAKED input stream to the
>> contents of the SOAP part.  If the user requests a MIME part while the XML
>> reader is only half way in to parsing the SOAP envelope, then the MIME
>> parser should read ahead the SOAP part, store it in memory and should
>> provide it as needed to the FAKED input stream. One other way to visualize
>> this is to think MIME parsing happens at a level below the XML parsing, just
>> like transport level.
>>
>> I'm not sure how hard to do this in Axis2/C (or whether it's
>> impossible)... Let me know if I'm not clear with the idea.
>>
>> thanks,
>> Thilina
>>
>>
>>
>> On Tue, Jul 15, 2008 at 3:04 AM, Supun Kamburugamuva <supun06@gmail.com>
>> wrote:
>>
>>>
>>>> But then again the problem will occur when xml_parser give the control
>>>> back to mime_parser. Because xml_parser will read beyond the soap part
>>>> when parsing. So the parser should be modified to return the the
>>>> unwanted data it read beyond the soap part while parsing. I think
>>>> Guththila can be modified for this requirement, but does any one know
>>>> how to do this with libxml2.
>>>>
>>>
>>> I assume by "read beyond the soap part" you mean consuming the stream
>>> beyond the soap part. But I think this is unavoidable in any parser.
>>>
>>> 1. Parser don't know where the xml ends.
>>> 2. The parser doesn't read character by chareacter from the stream (if it
>>> does it'll be very inefficient) and it reads chunks of data from the stream.
>>>
>>> Becuase of the above reasons the parser will consume the stream beyond
>>> the soap part.
>>>
>>> Supun..
>>>
>>>>
>>>>
>>>>
>>>> On Sat, 2008-07-12 at 21:21 +0530, Manjula Peiris wrote:
>>>> > On Sat, 2008-07-12 at 19:31 +0530, Milinda Pathirage wrote:
>>>> > > As Thilina mentioned in above thread Axis2/Java keeps a instance
of
>>>> > > mime parser in it's xml builder. So I think it's ok to follow that
>>>> > > method. AFAIK, I think if we enable MTOM caching we have to have
>>>> this
>>>> > > feature or is anybody have ideas about how to solve this without
>>>> going
>>>> > > to this method?. Manjula can you point out the changes we need
in
>>>> the
>>>> > > parser. Then we can discuss the problem and available solutions.
>>>> This
>>>> > > will help us to avoid any problems occur in the future because
of
>>>> the
>>>> > > changes.
>>>> > > If we have two methods for xml reader creation, how we can use
both
>>>> of
>>>> > > them in the Axis2/C engine. Are we going to check the MIME headers
>>>> and
>>>> > > create the required xml reader?
>>>> >
>>>> > In the MTOM case the serialized message is most probably in the
>>>> > following format.
>>>> >
>>>> > --MimeBoundary
>>>> > mime_header1:xxxxx
>>>> > mime_header2:xxxxx
>>>> >
>>>> > <soapenv:Envelope>.......</soapenv:Envelope>
>>>> > --MimeBoundary
>>>> > mime_header1:xxxx
>>>> > mime_header2:xxxx
>>>> >
>>>> > yyyyyyyyybinarydatayyyyyyyyyyyy
>>>> > --MimeBoundary--
>>>> >
>>>> > We have the information form http_headers whether this is a multipart
>>>> > message or not. So will call the soap_builder straightaway with a flag
>>>> > telling this is a multipart message. Since the modified soap_builder
>>>> > will have a reference to mime_parser instance when seeing this flag
it
>>>> > will call the mime_parser. mime_parser will search for \r\n\r\n
>>>> sequence
>>>> > between SOAP part and first mime_headers set. When searching for this
>>>> it
>>>> > may read some part of the SOAP. So after this search we can't
>>>> > straightaway call either xml_reader_create_for_io or
>>>> > xml_reader_create_for_memory, because none of them will not get
>>>> correct
>>>> > xml. So what we need is first read from a buffer and then when that
>>>> > buffer is finished read from the network stream. This will cause to
>>>> > define and implement the new xml_reader function and corresponding
>>>> > modifications at parser level as I mentioned in my previous mail.
>>>> >
>>>> > -Manjula.
>>>> >
>>>> >
>>>> > >
>>>> > > Thanks,
>>>> > > Milinda...
>>>> > >
>>>> > > On Sat, Jul 12, 2008 at 6:53 PM, Manjula Peiris <manjula@wso2.com>
>>>> > > wrote:
>>>> > >         Hi all,
>>>> > >
>>>> > >         MTOM caching stuff is finished in both send and receiving
>>>> > >         sides.It is
>>>> > >         available here [1]. But due to this [2] problem, it cannot
>>>> be
>>>> > >         integrated
>>>> > >         to Axis2/C trunk.
>>>> > >
>>>> > >         In order to solve that problem we need to keep a reference
>>>> of
>>>> > >         mime_parser instance in the soap_builder similarly
>>>> > >         stax_builder. So when
>>>> > >         parsing the soap part the xml_reader will not just read
from
>>>> > >         the stream,
>>>> > >         but also need to read from the buffer which will be
>>>> available
>>>> > >         after
>>>> > >         parsing mime_headrs. So we need to create a parser instance
>>>> > >         which will
>>>> > >         first read from the buffer and when that buffer is not
>>>> > >         containing any
>>>> > >         more data, it will read from the stream. So we may need
to
>>>> add
>>>> > >         a new
>>>> > >         function say,
>>>> > >         xml_reader_create_for_memory_and_io and change some of
the
>>>> > >         logic in
>>>> > >         parser.
>>>> > >         Your suggestions are highly appreciated.
>>>> > >
>>>> > >         [1]
>>>> https://svn.apache.org/repos/asf/webservices/axis2/branches/c/post_1_4_mtom/c
>>>> > >
>>>> > >         [2]
>>>> http://marc.info/?l=axis-c-dev&amp;m=121320959601769&amp;w=2<http://marc.info/?l=axis-c-dev&m=121320959601769&w=2>
>>>> > >
>>>> > >         Thanks,
>>>> > >         -Manjula.
>>>> > >
>>>> > >
>>>> > >         --
>>>> > >         Manjula Peiris: http://manjula-peiris.blogspot.com/
>>>> > >
>>>> > >
>>>> > >
>>>> ---------------------------------------------------------------------
>>>> > >         To unsubscribe, e-mail:
>>>> axis-c-dev-unsubscribe@ws.apache.org
>>>> > >         For additional commands, e-mail:
>>>> axis-c-dev-help@ws.apache.org
>>>> > >
>>>> > >
>>>> > >
>>>> > >
>>>> > > --
>>>> > > http://mpathirage.com
>>>> > > http://wso2.org "Oxygen for Web Service Developers"
>>>> > > http://wsaxc.blogspot.com "Web Services With Axis2/C"
>>>> >
>>>> >
>>>> > ---------------------------------------------------------------------
>>>> > To unsubscribe, e-mail: axis-c-dev-unsubscribe@ws.apache.org
>>>> > For additional commands, e-mail: axis-c-dev-help@ws.apache.org
>>>> >
>>>>
>>>>
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: axis-c-dev-unsubscribe@ws.apache.org
>>>> For additional commands, e-mail: axis-c-dev-help@ws.apache.org
>>>>
>>>>
>>>
>>
>>
>> --
>> Thilina Gunarathne - http://thilinag.blogspot.com
>
>
>


-- 
Thilina Gunarathne - http://thilinag.blogspot.com

Mime
View raw message