aries-commits mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
Subject svn commit: r1066456 - /aries/site/trunk/content/downloads/ariestrader-0.3.mdtext
Date Wed, 02 Feb 2011 13:10:29 GMT
Author: zoe
Date: Wed Feb  2 13:10:28 2011
New Revision: 1066456

Take a copy of the 0.3 aries trader instructions


Added: aries/site/trunk/content/downloads/ariestrader-0.3.mdtext
--- aries/site/trunk/content/downloads/ariestrader-0.3.mdtext (added)
+++ aries/site/trunk/content/downloads/ariestrader-0.3.mdtext Wed Feb  2 13:10:28 2011
@@ -0,0 +1,136 @@
+Title: AriesTrader
+<a name="AriesTrader-TheAriesTraderSample"></a>
+# The AriesTrader Sample
+<a name="AriesTrader-Prereqs"></a>
+### Prereqs 
+- - -
+These instructions are for the 0.2-incubating release of Aries.
+Instructions for older releases can be found [here](archiveinstructions.html)
+. In the 0.2-incubating release the AriesTrader sample was changed such
+that it is no longer required for you to install Derby independently.  The
+Derby version included in the sample is fully leveraged internally in the
+sample and therefore no additional Derby installation is required. 
+However, there are steps required to initialize the Database from within
+the sample itself (see instructions below).  
+- - -
+<a name="AriesTrader-CreatingtheOSGiplatform(equinox-test-harness)forAriesTrader"></a>
+### Creating the OSGi platform (equinox-test-harness) for AriesTrader 
+Download and unzip the source zip for the [latest release](aries:downloads.html)
+ of Aries Samples and build the equinox-test-harness module under
+    cd samples-0.2-incubating/ariestrader/assemblies/equinox-test-harness
+    mvn install
+This procedure will pull in the binaries from the latest release and its
+<a name="AriesTrader-AlternativebuildusingApacheAriestrunk."></a>
+### Alternative build using Apache Aries trunk.
+As an alternative to using the released version you can also choose to work
+with the latest, unreleased code.  This will require the use of subversion
+to checkout the code followed by building the entire Apache Aries project. 
+Directions are provided here:  [Building Aries instructions](aries:buildingaries.html)
+<a name="AriesTrader-StartingtheEquinoxTestHarnesstoruntheAriesTradersample"></a>
+### Starting the Equinox Test Harness to run the AriesTrader sample
+AriesTrader needs a test harness to run in.  For this purpose we are using
+an Equinox assembly that pulls in all of the necessary dependencies.  
+The first task is to start the Apache Aries modules in an OSGi framework
+using the Eclipse Equinox test harness
+    cd samples-0.2-incubating/ariestrader/assemblies/equinox-test-harness/target
+    java -jar osgi-3.5.0.v20090520.jar -console
+The OSGi console should start up, the 'ss' command should show the active
+bundles but the AriesTrader application is not yet installed (with the
+exception of the ariestrader derby datasource which is started with the
+test harness for convenience).	
+<a name="AriesTrader-InstallingAriesTraderintheEquinoxTestHarness"></a>
+### Installing AriesTrader in the Equinox Test Harness
+To install the AriesTrader application simply copy the eba for AriesTrader
+into the target/load directory, you will need to create this directory first.  
+For convenience the AriesTraders EBAs are
+copied into the target directory as part of creating the OSGi Equinox test
+When using the "JDBC" only AriesTrader configuration which supports only
+jdbc persistence:
+    cp org.apache.aries.samples.ariestrader.jdbc-*.eba load/
+When using the "All" AriesTrader configuration which supports all currently
+available persistence modes:
+    cp org.apache.aries.samples.ariestrader.all-*.eba load/
+Now the 'ss' command should show all of the AriesTrader bundles in state
+If you subsequently delete org.apache.aries.samples.ariestrader.jdbc-*.eba
+or org.apache.aries.samples.ariestrader.all-*.eba from the target/load
+directory the application will be uninstalled.
+<a name="AriesTrader-AccessingandusingtheAriesTradersample"></a>
+### Accessing and using the AriesTrader sample
+Point your browser at [http://localhost:8080/ariestrader/](http://localhost:8080/ariestrader/)
+Select the "Configuration" tab and the "Configure AriesTrader run-time
+parameters" choice.  Then select from among the available runtime modes
+(defauls to JDBC).  Be sure to click "update config" to save your
+At the moment the following persistence modes are available when using the
+"all" EBA:
+* JDBC persistence
+* JPA application managed entity manager persistence
+* JPA container managed entity managers using declarative transaction
+By default, the sample starts with JDBC persistence.  To select another
+persistence mechanism see the directions under "Accessing and using the
+AriesTrader sample. 
+After selecting the persistence mode you must create the AriesTrader
+Database tables and indexs.  Select the "Configuration" tab and the
+"(Re)-create AriesTrader Tables and Indexes". 
+Next, you must seed the database with test content.  Once again go to the
+"Configuration" tab but this time select "(Re)-populate AriesTrader
+Database" from the available choices to seed the database with a default
+set of users and stock quotes.	You will see a number of quotes (default is
+400) and users (default is 200) created.
+Select the "Trading & Portfolios" tab to use the mock trade application or
+the "Primitives" tab to run some of the web primitive tests (PingJSPEL is
+not currently working).  You can also run the "Test AriesTrader Scenario"
+from the "Configuration" tab which will launch a new browser window and
+step through a trading scenario with each reload of the page.
+<a name="AriesTrader-AbouttheAriesTraderSample"></a>
+### About the AriesTrader Sample
+The AriesTrader sample is a modified version of the Apache Geronimo
+DayTrader sample.  It has been somewhat simplified and reorganized to
+support the Apache Aries programming model.  
+The AriesTrader sample bundles are organized like this:

View raw message