ant-user mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From "Anderson, Rob (Global Trade)" <Rob.Ander...@nike.com>
Subject RE: SCP Auth Faild
Date Wed, 26 Jul 2006 17:07:30 GMT
Nevermind about trying to test if SSH2 protocol is supported. You would get a different error
if SSH2 was not supported. I just tried a bunch of scenarios and the only one that produced
the "Auth Fail" error was a wrong username/password combo. I know you have checked and double
checked, but one way to be absolutely sure is to add the following just before sshexec task
in your build file...

<target name="to-dv" description="Compile and upload to DeVelopment server.">
  <echo>username = ${username}</echo>
  <echo>password = ${password}</echo>
...

Then run ant. Do they say what you expect? If so, in the properties file where the password
and username are, make sure the lines are not terminated with "\n" and there are no quotes
around the values.

-Rob A


> -----Original Message-----
> From: Anderson, Rob (Global Trade) 
> Sent: Wednesday, July 26, 2006 9:35 AM
> To: 'Ant Users List'
> Subject: RE: SCP Auth Faild
> 
> The version you are using supports the diffie-hellman key 
> exchange method. Also, make sure that the server is 
> configured to support SSH2 protocol. You could do this by 
> logging in with like Putty and running...
> ssh -2 localhost
> Or, in Putty there is an option to use SSH protocol version 2 
> only. By default, most clients will try to connect with SSH2 
> protocol, but fall back to SSH1 if necessary. Jsch only supports SSH2.
> 
> -Rob Anderson
> 
> 
> > -----Original Message-----
> > From: PHILIPPE Johan [mailto:Johan.PHILIPPE@post.be]
> > Sent: Wednesday, July 26, 2006 1:45 AM
> > To: Ant Users List
> > Subject: RE: SCP Auth Faild
> > 
> > This could be it, the version is
> > 
> > OpenSSH_4.1p1, OpenSSL 0.9.7d 17 Mar 2004
> > 
> > Thanks for the hint, I'll see if I can confirm it and in 
> the mean time 
> > get rid of the issue.
> > 
> > 
> > MVrGr,
> > 
> > Johan
> > 
> > > -----Original Message-----
> > > From: Anderson, Rob (Global Trade) [mailto:Rob.Anderson@nike.com]
> > > Sent: dinsdag 25 juli 2006 19:33
> > > To: Ant Users List
> > > Subject: RE: SCP Auth Faild
> > > 
> > > It should work. It works for me. I'm not sure why you are having 
> > > problems with it. What distribution and version of ssh
> > server are you
> > > using? There have been issues with early versions of sshd
> > that do not
> > > support the diffie-hellman key exchange method 
> implemented in jsch.
> > > 
> > > -Rob A
> > > 
> > > > -----Original Message-----
> > > > From: PHILIPPE Johan [mailto:Johan.PHILIPPE@post.be]
> > > > Sent: Tuesday, July 25, 2006 12:40 AM
> > > > To: Ant Users List
> > > > Subject: RE: SCP Auth Faild
> > > >
> > > > Been there, Done That.
> > > > And the user name and password are absolute correct and
> > absolutely
> > > > straight forward.
> > > > The error is indicating it cannot authenticate, which under the 
> > > > circumstances it should be able to do.
> > > > With regards to using an ssh key, well
> > keyboard-interactive is the
> > > > standard I find myself in at the company I'm working for at the 
> > > > moment.  It's what I'll have to work with for the near to
> > mid-term
> > > > at least.
> > > > Anyway, there's nothing in TFM saying that it shouldn't 
> work with 
> > > > keyboard-interactive.
> > > >
> > > > MVrGr,
> > > >
> > > > Johan
> > > >
> > > >
> > > > > -----Original Message-----
> > > > > From: Anderson, Rob (Global Trade)
> > [mailto:Rob.Anderson@nike.com]
> > > > > Sent: maandag 24 juli 2006 19:26
> > > > > To: Ant Users List
> > > > > Subject: RE: SCP Auth Faild
> > > > >
> > > > > The error you are getting indicates that the username and
> > > > password are
> > > > > incorrect. Some people have had problems if there are special 
> > > > > characters in the password and the password is in the
> > > > build.xml file.
> > > > > If this is the case, try putting the password in a properties 
> > > > > file, without quotes. The best option, in my opinion, 
> is to use
> > > > an ssh key for authentication.
> > > > >
> > > > > -Rob A
> > > > >
> > > > >
> > > > >
> > > > > > -----Original Message-----
> > > > > > From: PHILIPPE Johan [mailto:Johan.PHILIPPE@post.be]
> > > > > > Sent: Monday, July 24, 2006 4:52 AM
> > > > > > To: user@ant.apache.org
> > > > > > Subject: RE: SCP Auth Faild
> > > > > >
> > > > > > I'm currently facing a similar problem and are
> > wondering if it
> > > > > > is related to:
> > > > > >
> > > > > > 
> http://marc.theaimsgroup.com/?l=ant-dev&m=111959408515300&w=2
> > > > > >
> > > > > > The server I am trying to connect to does indeed use 
> > > > > > keyboard-interactive login (as is apparent when I do a
> > > > manual login
> > > > > > with SSH/PuTTY).
> > > > > >
> > > > > > Both sshexec and scp fail in a similar fashion.  The
> > > > following task:
> > > > > >
> > > > > >     <target name="to-dv" description="Compile and upload
to 
> > > > > > DeVelopment server.">
> > > > > > 	<sshexec host="s30835"
> > > > > > 		username="${user}"
> > > > > > 		password="${password}"
> > > > > > 		knownhosts="${basedir}/known_hosts"
> > > > > > 		failonerror="false"
> > > > > > 		command="touch tst.txt"/>
> > > > > >         <scp file="${basedir}/libs/app-1.0.0.ear"
> > > > > >
> > > > > > todir="${user}:${password}@s30835:/usr/local/${user}/deploy"
> > > > > >              verbose="true"
> > > > > >              knownhosts="${basedir}/known_hosts"
> > > > > >              />
> > > > > >     </target>
> > > > > >
> > > > > > Gives this output:
> > > > > >
> > > > > > to-dv:
> > > > > >   [sshexec] Connecting to s30835:22
> > > > > >   [sshexec] Caught exception: Auth fail
> > > > > >       [scp] Connecting to s30835:22
> > > > > >
> > > > > > BUILD FAILED
> > > > > > C:\Projects\BOP\DEV\build.xml:76:
> > > > > > com.jcraft.jsch.JSchException: Auth fail
> > > > > > 	at
> > > > > >
> > > > 
> > org.apache.tools.ant.taskdefs.optional.ssh.Scp.execute(Scp.java:187)
> > > > > > 	at
> > > > > >
> > > > 
> > org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
> > > > > > 	at org.apache.tools.ant.Task.perform(Task.java:364)
> > > > > > 	at org.apache.tools.ant.Target.execute(Target.java:341)
> > > > > > 	at
> > org.apache.tools.ant.Target.performTasks(Target.java:369)
> > > > > > 	at
> > > > > >
> > > > 
> > org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
> > > > > > 	at
> > > org.apache.tools.ant.Project.executeTarget(Project.java:1185)
> > > > > > 	at
> > > > > > 
> org.apache.tools.ant.helper.DefaultExecutor.executeTargets(Def
> > > > > > aultExecut
> > > > > > or.java:40)
> > > > > > 	at
> > > > > > 
> org.apache.tools.ant.Project.executeTargets(Project.java:1068)
> > > > > > 	at org.apache.tools.ant.Main.runBuild(Main.java:668)
> > > > > > 	at org.apache.tools.ant.Main.startAnt(Main.java:187)
> > > > > > 	at
> > org.apache.tools.ant.launch.Launcher.run(Launcher.java:246)
> > > > > > 	at
> > org.apache.tools.ant.launch.Launcher.main(Launcher.java:67)
> > > > > > Caused by: com.jcraft.jsch.JSchException: Auth fail
> > > > > > 	at com.jcraft.jsch.Session.connect(Unknown Source)
> > > > > > 	at com.jcraft.jsch.Session.connect(Unknown Source)
> > > > > > 	at
> > > > > > 
> org.apache.tools.ant.taskdefs.optional.ssh.SSHBase.openSession
> > > > > > (SSHBase.j
> > > > > > ava:180)
> > > > > > 	at
> > > > > >
> > > > 
> > org.apache.tools.ant.taskdefs.optional.ssh.Scp.upload(Scp.java:249)
> > > > > > 	at
> > > > > >
> > > > 
> > org.apache.tools.ant.taskdefs.optional.ssh.Scp.execute(Scp.java:176)
> > > > > > 	... 12 more
> > > > > > --- Nested Exception ---
> > > > > > com.jcraft.jsch.JSchException: Auth fail
> > > > > > 	at com.jcraft.jsch.Session.connect(Unknown Source)
> > > > > > 	at com.jcraft.jsch.Session.connect(Unknown Source)
> > > > > > 	at
> > > > > > 
> org.apache.tools.ant.taskdefs.optional.ssh.SSHBase.openSession
> > > > > > (SSHBase.j
> > > > > > ava:180)
> > > > > > 	at
> > > > > >
> > > > 
> > org.apache.tools.ant.taskdefs.optional.ssh.Scp.upload(Scp.java:249)
> > > > > > 	at
> > > > > >
> > > > 
> > org.apache.tools.ant.taskdefs.optional.ssh.Scp.execute(Scp.java:176)
> > > > > > 	at
> > > > > >
> > > > 
> > org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
> > > > > > 	at org.apache.tools.ant.Task.perform(Task.java:364)
> > > > > > 	at org.apache.tools.ant.Target.execute(Target.java:341)
> > > > > > 	at
> > org.apache.tools.ant.Target.performTasks(Target.java:369)
> > > > > > 	at
> > > > > >
> > > > 
> > org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
> > > > > > 	at
> > > org.apache.tools.ant.Project.executeTarget(Project.java:1185)
> > > > > > 	at
> > > > > > 
> org.apache.tools.ant.helper.DefaultExecutor.executeTargets(Def
> > > > > > aultExecut
> > > > > > or.java:40)
> > > > > > 	at
> > > > > > 
> org.apache.tools.ant.Project.executeTargets(Project.java:1068)
> > > > > > 	at org.apache.tools.ant.Main.runBuild(Main.java:668)
> > > > > > 	at org.apache.tools.ant.Main.startAnt(Main.java:187)
> > > > > > 	at
> > org.apache.tools.ant.launch.Launcher.run(Launcher.java:246)
> > > > > > 	at
> > org.apache.tools.ant.launch.Launcher.main(Launcher.java:67)
> > > > > >
> > > > > > Total time: 9 seconds
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > > -----Original Message-----
> > > > > > > From: Arminio Andrei [mailto:arminio.andrei@yahoo.com]
> > > > > > > Sent: woensdag 19 juli 2006 23:16
> > > > > > > To: Ant Users List
> > > > > > > Subject: RE: SCP Auth Faild
> > > > > > >
> > > > > > > I will post u a log tomorrow, now I'm home and I 
> don't have
> > > > > > access to
> > > > > > may
> > > > > > > build server.
> > > > > > >
> > > > > > >   Thx again Rob,
> > > > > > >   Arminio A.
> > > > > > >
> > > > > > > "Anderson, Rob (Global Trade)" 
> > <Rob.Anderson@nike.com> wrote:
> > > > > > >   It doesn't say "Connecting to host:22" before the
> > > > > > failure? That is
> > > > > > > strange. Anyway, if it works now, that is all 
> that matters.
> > > > > > >
> > > > > > > -Rob A
> > > > > > >
> > > > > > > > -----Original Message-----
> > > > > > > > From: Arminio Andrei [mailto:arminio.andrei@yahoo.com]
> > > > > > > > Sent: Wednesday, July 19, 2006 11:33 AM
> > > > > > > > To: Ant Users List
> > > > > > > > Subject: RE: SCP Auth Faild
> > > > > > > >
> > > > > > > > No, there isn't other messages before failure! I'm
> > > > sure the best
> > > > > > > > practice is tu use ssh keys that works for me now.
> > > > > > > >
> > > > > > > > "Anderson, Rob (Global Trade)" wrote:
> > > > > > > > I would like to see if there are any other messages
> > > > from the scp
> > > > > > > > task before the failure. This may help identify the
> > > > > > problem or show
> > > > > > > > how far the task gets before failure.
> > > > > > > >
> > > > > > > > -Rob A
> > > > > > > >
> > > > > > > > > -----Original Message-----
> > > > > > > > > From: Arminio Andrei [mailto:arminio.andrei@yahoo.com]
> > > > > > > > > Sent: Tuesday, July 18, 2006 8:04 AM
> > > > > > > > > To: Ant Users List
> > > > > > > > > Subject: RE: SCP Auth Faild
> > > > > > > > >
> > > > > > > > > Why?
> > > > > > > > > I'm using a bash script with scp output droped
and
> > > > > > print progress
> > > > > > > > > messages
> > > > > > > > >
> > > > > > > > > "Anderson, Rob (Global Trade)" wrote:
> > > > > > > > > Can you send the entire output of the build please.
> > > > > > > > >
> > > > > > > > > -Rob A
> > > > > > > > >
> > > > > > > > > > -----Original Message-----
> > > > > > > > > > From: Arminio Andrei 
> [mailto:arminio.andrei@yahoo.com]
> > > > > > > > > > Sent: Monday, July 17, 2006 12:39 PM
> > > > > > > > > > To: Ant Users List
> > > > > > > > > > Subject: RE: SCP Auth Faild
> > > > > > > > > >
> > > > > > > > > > Thanks Bob!
> > > > > > > > > >
> > > > > > > > > > "Anderson, Rob (Global Trade)" wrote:
> > > > > > > > > > The error indicates an authentication
> > failure. This can
> > > > > > > > > happen for
> > > > > > > > > > a few common reasons.
> > > > > > > > > >
> > > > > > > > > > 1. If your password has special characters

> and you are
> > > > > > > > putting the
> > > > > > > > > > actual password in your build.xml you may
get
> > this error.
> > > > > > > > > To fix the
> > > > > > > > > > problem, put the password in a properties
> > file and use a
> > > > > > > > > property in
> > > > > > > > > > your build.xml.
> > > > > > > > > >
> > > > > > > > > > My password don't have special characters

> and dosen't
> > > > > > > > > work evean if
> > > > > > > > > > I put it in a properties file.
> > > > > > > > > >
> > > > > > > > > > 2. If your password is not correct, you
will get
> > > > this error.
> > > > > > > > > >
> > > > > > > > > > And I'm sure it is correct.
> > > > > > > > > >
> > > > > > > > > > I recommend using ssh keys to authenticate
> > > > because you will
> > > > > > > > > not have
> > > > > > > > > > to put your password in plain text into
a 
> build.xml or
> > > > > > properties
> > > > > > > > > > file.
> > > > > > > > > >
> > > > > > > > > > I've make a bash script that can do this
job using
> > > > > > ssh keys to
> > > > > > > > > > authenticate and I guess will be a peace
of cake
> > > > to use scp
> > > > > > > > > ant task,
> > > > > > > > > > but this tomorrow
> > > > > > > > > >
> > > > > > > > > > -Rob A
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > > -----Original Message-----
> > > > > > > > > > > From: Arminio Andrei
> > [mailto:arminio.andrei@yahoo.com]
> > > > > > > > > > > Sent: Friday, July 14, 2006 11:37 PM
> > > > > > > > > > > To: user@ant.apache.org
> > > > > > > > > > > Subject: SCP Auth Faild
> > > > > > > > > > >
> > > > > > > > > > > Hi all,
> > > > > > > > > > >
> > > > > > > > > > > I try to copy a bunch of files from
my 
> local machine
> > > > > > > > > > (Fedora Core 5)
> > > > > > > > > > > to the jboss server that running on
a SuSe
> > > > Enterprise 9. I
> > > > > > > > > > write this
> > > > > > > > > > > ant task:
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > I'm geting this error:
> > > > > > > > > > > BUILD FAILED
> > > > > > > > > > >
> > > > > > 
> /usr/local/cruisecontrol/projects/CNAS-SIUI/build/tst.xml:60:
> > > > > > > > > > > com.jcraft.jsch.JSchException: Auth
fail at
> > > > > > > > > > >
> > > > > > > > >
> > > > > >
> > > > 
> > org.apache.tools.ant.taskdefs.optional.ssh.Scp.execute(Scp.java:187)
> > > > > > > > > > > at
> > > > > > > > > > >
> > > > > > > > >
> > > > > >
> > > > 
> > org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
> > > > > > > > > > > at 
> org.apache.tools.ant.Task.perform(Task.java:364)
> > > > > > > > > > > at
> > > > > > > > > > > 
> org.apache.tools.ant.Target.execute(Target.java:341)
> > > > > > > > > > > at
> > > > > > > > > > >
> > > > org.apache.tools.ant.Target.performTasks(Target.java:369)
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > >
> > > > 
> > 
> ......................................................................
> > > > > > > > > > >
> > > > > > > > > > > If I use scp everything works fine
but from
> > ant ......
> > > > > > > > > > >
> > > > > > > > > > > I try to use diffrent kind of jsch.jar
> > libraries but I
> > > > > > > > > get the same
> > > > > > > > > > > error.
> > > > > > > > > > >
> > > > > > > > > > > Does anyoane of u know what happends?
> > > > > > > > > > >
> > > > > > > > > > > Thx for help,
> > > > > > > > > > > Arminio
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > --------------------------------- Do
you Yahoo!?
> > > > > > > > > > > Next-gen email? Have it all with the

> all-new Yahoo!
> > > > > > Mail Beta.
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > >
> > > > 
> > --------------------------------------------------------------------
> > > > > > -
> > > > > > > > > > To unsubscribe, e-mail:
> > > > user-unsubscribe@ant.apache.org For
> > > > > > > > > additional
> > > > > > > > > > commands, e-mail: user-help@ant.apache.org
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > --------------------------------- Do you
Yahoo!?
> > > > > > > > > > Next-gen email? Have it all with the all-new
> > > > Yahoo! Mail Beta.
> > > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > >
> > > > 
> > --------------------------------------------------------------------
> > > > > > -
> > > > > > > > > To unsubscribe, e-mail: 
> user-unsubscribe@ant.apache.org 
> > > > > > > > > For
> > > > > > > > additional
> > > > > > > > > commands, e-mail: user-help@ant.apache.org
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > --------------------------------- Do you Yahoo!?
> > > > > > > > > Get on board. You're invited to try the new Yahoo!
> > > > Mail Beta.
> > > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > >
> > > > 
> > --------------------------------------------------------------------
> > > > > > -
> > > > > > > > To unsubscribe, e-mail: 
> > user-unsubscribe@ant.apache.org For
> > > > > > > > additional commands, e-mail: user-help@ant.apache.org
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > --------------------------------- How low will we
go?
> > > > Check out
> > > > > > > > Yahoo! Messenger's low PC-to-Phone call rates.
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > >
> > > > 
> > --------------------------------------------------------------------
> > > > > > -
> > > > > > > To unsubscribe, e-mail: 
> user-unsubscribe@ant.apache.org For
> > > > > > additional
> > > > > > > commands, e-mail: user-help@ant.apache.org
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >  __________________________________________________
> > > > > > > Do You Yahoo!?
> > > > > > > Tired of spam?  Yahoo! Mail has the best spam protection

> > > > > > > around http://mail.yahoo.com
> > > > > >
> > > > > >
> > > > > > STRICTLY PERSONAL AND CONFIDENTIAL This message may contain

> > > > > > confidential and proprietary
> > > > material for
> > > > > > the sole use of the intended recipient. Any review or
> > > > distribution
> > > > > > by others is strictly prohibited. If you are not 
> the intended 
> > > > > > recipient please contact the sender and delete all copies.
> > > > > >
> > > > > > Dit bericht is enkel bestemd voor de aangeduide 
> ontvangers en 
> > > > > > kan vertrouwelijke informatie bevatten. Als u niet de
> > ontvanger
> > > > > > bent, dan mag u de inhoud van dit bericht niet
> > bekendmaken noch
> > > > kopiëren.
> > > > > > Als u dit bericht per vergissing ontvangen heeft,
> > gelieve er de
> > > > > > afzender of De Post onmiddellijk van op de hoogte te
> > > > brengen en het
> > > > > > bericht vervolgens te verwijderen.
> > > > > >
> > > > > > Ce message est uniquement destiné aux destinataires
> > > > indiqués et peut
> > > > > > contenir des informations confidentielles. Si vous
> > n'êtes pas le
> > > > > > destinataire, vous ne devez pas révéler le contenu de ce
> > > > message ou
> > > > > > en prendre copie. Si vous avez reçu ce message par
> > > > erreur, veuillez
> > > > > > en informer l'expéditeur, ou La Poste immédiatement,
> > avant de le
> > > > > > supprimer.
> > > > > >
> > > > > >
> > > > 
> > --------------------------------------------------------------------
> > > > > > - To unsubscribe, e-mail: 
> user-unsubscribe@ant.apache.org For 
> > > > > > additional commands, e-mail: user-help@ant.apache.org
> > > > > >
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > 
> > --------------------------------------------------------------------
> > > > -
> > > > > To unsubscribe, e-mail: user-unsubscribe@ant.apache.org For
> > > > additional
> > > > > commands, e-mail: user-help@ant.apache.org
> > > >
> > > >
> > > >
> > > > STRICTLY PERSONAL AND CONFIDENTIAL This message may contain 
> > > > confidential and proprietary
> > material for
> > > > the sole use of the intended recipient. Any review or
> > distribution
> > > > by others is strictly prohibited. If you are not the intended 
> > > > recipient please contact the sender and delete all copies.
> > > >
> > > > Dit bericht is enkel bestemd voor de aangeduide 
> ontvangers en kan 
> > > > vertrouwelijke informatie bevatten. Als u niet de 
> ontvanger bent, 
> > > > dan mag u de inhoud van dit bericht niet bekendmaken noch
> > kopiëren. 
> > > > Als u dit bericht per vergissing ontvangen heeft, gelieve er de 
> > > > afzender of De Post onmiddellijk van op de hoogte te
> > brengen en het
> > > > bericht vervolgens te verwijderen.
> > > >
> > > > Ce message est uniquement destiné aux destinataires
> > indiqués et peut
> > > > contenir des informations confidentielles. Si vous 
> n'êtes pas le 
> > > > destinataire, vous ne devez pas révéler le contenu de ce
> > message ou
> > > > en prendre copie. Si vous avez reçu ce message par
> > erreur, veuillez
> > > > en informer l'expéditeur, ou La Poste immédiatement, 
> avant de le 
> > > > supprimer.
> > > >
> > > 
> > > 
> > > 
> > 
> ---------------------------------------------------------------------
> > > To unsubscribe, e-mail: user-unsubscribe@ant.apache.org For
> > additional
> > > commands, e-mail: user-help@ant.apache.org
> > 
> > 
> > 
> > STRICTLY PERSONAL AND CONFIDENTIAL
> > This message may contain confidential and proprietary 
> material for the 
> > sole use of the intended recipient. Any review or distribution by 
> > others is strictly prohibited. If you are not the intended 
> recipient 
> > please contact the sender and delete all copies.
> > 
> > Dit bericht is enkel bestemd voor de aangeduide ontvangers en kan 
> > vertrouwelijke informatie bevatten. Als u niet de ontvanger 
> bent, dan 
> > mag u de inhoud van dit bericht niet bekendmaken noch 
> kopiëren. Als u 
> > dit bericht per vergissing ontvangen heeft, gelieve er de 
> afzender of 
> > De Post onmiddellijk van op de hoogte te brengen en het bericht 
> > vervolgens te verwijderen.
> > 
> > Ce message est uniquement destiné aux destinataires 
> indiqués et peut 
> > contenir des informations confidentielles. Si vous n'êtes pas le 
> > destinataire, vous ne devez pas révéler le contenu de ce 
> message ou en 
> > prendre copie. Si vous avez reçu ce message par erreur, veuillez en 
> > informer l'expéditeur, ou La Poste immédiatement, avant de le 
> > supprimer.
> > 
> 


---------------------------------------------------------------------
To unsubscribe, e-mail: user-unsubscribe@ant.apache.org
For additional commands, e-mail: user-help@ant.apache.org


Mime
View raw message