ant-user mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From "Pinar Bicioglu" <pinarb...@hotmail.com>
Subject RE: doing SourceSafe get
Date Fri, 08 Jun 2001 15:36:53 GMT
Felice,
when i tried to get help on ss command form the command line it printed
username=pbicioglu
password=             when i entered the password it said user not found. i 
checked the database connection and it was correct i just don't get it !!


>From: "Vittoria, Felice" <Felice_Vittoria@bmc.com>
>Reply-To: ant-user@jakarta.apache.org
>To: "'ant-user@jakarta.apache.org'" <ant-user@jakarta.apache.org>
>Subject: RE: doing SourceSafe get
>Date: Fri, 8 Jun 2001 10:07:08 -0500
>
>Pinar,
>
>Hmm ... is your workfolder set?  I'm pretty sure it is but it never hurts 
>to
>check.   The command that you need to run is ss workfld [Project] [Folder].
>Check VSS's help for more info on this.
>
>Oh .. and what happens if you run the ss get command (with parameters that
>you set) from the command-line?
>
>Felice
>
>
>
>-----Original Message-----
>From: Pinar Bicioglu [mailto:pinarbici@hotmail.com]
>Sent: Friday, June 08, 2001 10:00 AM
>To: ant-user@jakarta.apache.org
>Subject: RE: doing SourceSafe get
>
>
>
>thanks for your help Felice but it didn't make any difference ...:(
>I can't think of anything else to solve this problem!
>
> >From: "Vittoria, Felice" <Felice_Vittoria@bmc.com>
> >Reply-To: ant-user@jakarta.apache.org
> >To: "'ant-user@jakarta.apache.org'" <ant-user@jakarta.apache.org>
> >Subject: RE: doing SourceSafe get
> >Date: Fri, 8 Jun 2001 09:29:46 -0500
> >
> >Hmm ... maybe it's hanging because of the -I- argument.  I think that you
> >need to change it to either a -I-Y or -I-N.
> >
> >Here's the help page from VSS regarding this command-line option:
> >
> >-I Command-Line Option
> >There are a number of circumstances when VSS commands ask for input from
> >the
> >user (for example, warnings containing Yes or No questions). This is not
> >desirable when writing scripts or macros that execute the VSS command 
>line
> >from inside other programs. Use the -I- option to ensure that VSS never
> >asks
> >for user input.
> >
> >When using the -I option, include the -C option to avoid the comment
> >prompt.
> >
> >The following table lists ways to use the -I option.
> >
> >Option Description
> >-I-Y Instructs VSS to answer Yes to all Yes or No questions.
> >-I-N Instructs VSS to answer No to all Yes or No questions.
> >
> >HTH,
> >Felice
> >
> >-----Original Message-----
> >From: Pinar Bicioglu [mailto:pinarbici@hotmail.com]
> >Sent: Friday, June 08, 2001 9:22 AM
> >To: ant-user@jakarta.apache.org
> >Subject: RE: doing SourceSafe get
> >
> >
> >
> >i already tried this. It stil just hangs there...After waiting for a 
>while
> >I
> >
> >terminated the program by entering ctrl+C and here is the message I got
> >
> >D:\ap2\javasrc\server>ant getcode
> >Buildfile: build.xml
> >
> >getcode:
> >      [exec] Username: ant
> >^CTerminate batch job (Y/N)?
> >d:\jdk1.2.2\bin\java.exe was unexpected at this time.
> >
> >thanks for your help! :)
> >
> >
> > >From: Jeff Post <jeffp@genesyslab.com>
> > >Reply-To: ant-user@jakarta.apache.org
> > >To: "'ant-user@jakarta.apache.org'" <ant-user@jakarta.apache.org>
> > >Subject: RE: doing SourceSafe get
> > >Date: Thu, 7 Jun 2001 13:51:43 -0700
> > >
> > >I think it is hanging because it is waiting for a password. Try <arg
> > >value="-Yant,ant" /> (remove the space) and see if that works.
> > >
> > >JP
> > >
> > >-----Original Message-----
> > >From: Pinar Bicioglu [mailto:pinarbici@hotmail.com]
> > >Sent: Thursday, June 07, 2001 1:17 PM
> > >To: ant-user@jakarta.apache.org
> > >Subject: RE: doing SourceSafe get
> > >
> > >
> > >
> > >in my earlier message I'd asked about "-Y"
> > >the user name and password I have is  "ant, ant"
> > >So when I write "<arg value="-Yant, ant" />, i get the following
> > >
> > >D:\ap2\javasrc\server>ant getcode
> > >Buildfile: build.xml
> > >
> > >getcode:
> > >      [exec] Username: ant
> > >
> > >then it just hangs there !!
> > >
> > > >From: Jeff Post <jeffp@genesyslab.com>
> > > >Reply-To: ant-user@jakarta.apache.org
> > > >To: "'ant-user@jakarta.apache.org'" <ant-user@jakarta.apache.org>
> > > >Subject: RE: doing SourceSafe get
> > > >Date: Thu, 7 Jun 2001 12:48:07 -0700
> > > >
> > > >You don't use "exec task with vssget". Instead of using the task
> >vssget,
> > > >you
> > > >use the task exec.
> > > >
> > > >His example shows how to use that task:
> > > >
> > > >     Example:
> > > >
> > > >     <exec executable="${ss.path}/ss.exe">
> > > >        <arg value="get" />
> > > >        <arg value="${project}" />
> > > >        <arg value="-R" />
> > > >        <arg value="-I-" />
> > > >        <arg value="-GWS" />
> > > >        <arg value="-Y${ss.user},${ss.pass}" />
> > > >     </exec>
> > > >
> > > >JP
> > > >
> > > >-----Original Message-----
> > > >From: Pinar Bicioglu [mailto:pinarbici@hotmail.com]
> > > >Sent: Thursday, June 07, 2001 12:40 PM
> > > >To: ant-user@jakarta.apache.org
> > > >Subject: RE: doing SourceSafe get
> > > >
> > > >
> > > >
> > > >this helped a lot..I've got something to work on now. So it's not
> >working
> > > >correcty.
> > > >What I don;t understand is how to use exec task with vssget. I mean
> >what
> > >is
> > > >the right way to execute vssget with "-GWS" option ??
> > > >Thanks
> > > >
> > > > >From: "Peterson, Lance" <lpeterson@verticore.com>
> > > > >Reply-To: ant-user@jakarta.apache.org
> > > > >To: "'ant-user@jakarta.apache.org'" <ant-user@jakarta.apache.org>
> > > > >Subject: RE: doing SourceSafe get
> > > > >Date: Thu, 7 Jun 2001 12:56:53 -0600
> > > > >
> > > > >SS.EXE has many command-line options.  For example, running the
> >command
> > > >"ss
> > > > >get $/dev/project1/src -R -I-" instructs SourceSafe to recursively
> >get
> > > >all
> > > > >files from the $/dev/project1/src project.  If you want to make 
>sure
> > > > >SourceSafe does not overwrite your checked-out files, you can add

>the
> > > >-GWS
> > > > >option.
> > > > >
> > > > ><vssget> does not support the -GWS option.  So therefore you
can 
>use
> > >the
> > > > ><exec> task to call SS.EXE directly and pass it the -GWS option

>using
> > >the
> > > > ><arg> element.
> > > > >
> > > > >Example:
> > > > >
> > > > ><exec executable="${ss.path}/ss.exe">
> > > > >   <arg value="get" />
> > > > >   <arg value="${project}" />
> > > > >   <arg value="-R" />
> > > > >   <arg value="-I-" />
> > > > >   <arg value="-GWS" />
> > > > >   <arg value="-Y${ss.user},${ss.pass}" />
> > > > ></exec>
> > > > >
> > > > >where...
> > > > >
> > > > >${ss.path} is the path to SS.EXE (usually c:\program 
>files\microsoft
> > > >visual
> > > > >studio\common\vss\win32).
> > > > >${project} is the project path (i.e. $/Dev/source).
> > > > >${ss.user} and ${ss.pass} are username and password.
> > > > >
> > > > >Hope this helps!
> > > > >
> > > > >-----Original Message-----
> > > > >From: Pinar Bicioglu [mailto:pinarbici@hotmail.com]
> > > > >Sent: Thursday, June 07, 2001 10:50 AM
> > > > >To: ant-user@jakarta.apache.org
> > > > >Subject: RE: doing SourceSafe get
> > > > >
> > > > >
> > > > >
> > > > >I checked the source safe and ant doc but couldn't come up with
> > >anything
> > > > >useful :(
> > > > >So what I understand from this is that I can control which file to
> >get
> > > >form
> > > > >the sourcesafe when i perform "ant getcode" from the command line
> > > > >Is that correct ?
> > > > >
> > > > > >From: "Peterson, Lance" <lpeterson@verticore.com>
> > > > > >Reply-To: ant-user@jakarta.apache.org
> > > > > >To: "'ant-user@jakarta.apache.org'" <ant-user@jakarta.apache.org>
> > > > > >Subject: RE: doing SourceSafe get
> > > > > >Date: Wed, 6 Jun 2001 15:10:26 -0600
> > > > > >
> > > > > >You can control overwrites by using the <exec> task to
call 
>SS.EXE
> > > > >directly
> > > > > >and passing the correct options (see the SourceSafe 
>documentation).
> > > > > ><vssget> does not have this capability.
> > > > > >
> > > > > >-----Original Message-----
> > > > > >From: Pinar Bicioglu [mailto:pinarbici@hotmail.com]
> > > > > >Sent: Wednesday, June 06, 2001 2:32 PM
> > > > > >To: ant-user@jakarta.apache.org
> > > > > >Subject: RE: doing SourceSafe get
> > > > > >
> > > > > >
> > > > > >
> > > > > >Here is another problem we found about "vssget" task ....If you
> >have
> > > > > >checked
> > > > > >
> > > > > >out a file and changed it, vssget will overwrite your file 
>without
> > > >asking
> > > > > >you. is there a way to say  "do not overwrite file if checked

>out"
> >or
> > > >"do
> > > > > >not overwrite a file which is not read-only".
> > > > > >
> > > > > >Thanks
> > > > > >
> > > > > >
> > > > > >
> > > > > > >From: "Pinar Bicioglu" <pinarbici@hotmail.com>
> > > > > > >Reply-To: ant-user@jakarta.apache.org
> > > > > > >To: ant-user@jakarta.apache.org
> > > > > > >Subject: RE: doing SourceSafe get
> > > > > > >Date: Tue, 05 Jun 2001 22:48:55 -0000
> > > > > > >
> > > > > > >
> > > > > > >yes you're right it is in there. Actually i knew that it
was
> >there.
> > > >but
> > > > > > >since I am using a server in Europe I thought there should
be
> > >another
> > > > >one
> > > > > > >on
> > > > > > >that server!!
> > > > > > >It seems like it is working now. The only thing that I need
to 
>be
> > > >done
> > > > > >with
> > > > > > >is that to write a login attribute without specifying a

>password
> >:)
> > > > > > >
> > > > > > >Or I can get a new user name and password collections, but
the
> > >person
> > > > >who
> > > > > > >takes care of this stuff is in Europe and he probably is

>slepping
> > > >right
> > > > > >now
> > > > > > >because it's midnight over there :)
> > > > > > >
> > > > > > >i want to get over with vssget today before I leave :)
> > > > > > >
> > > > > > >Thanks a lot for your help :)
> > > > > > >
> > > > > > >>From: "Peterson, Lance" <lpeterson@verticore.com>
> > > > > > >>Reply-To: ant-user@jakarta.apache.org
> > > > > > >>To: "'ant-user@jakarta.apache.org'"
> ><ant-user@jakarta.apache.org>
> > > > > > >>Subject: RE: doing SourceSafe get
> > > > > > >>Date: Tue, 5 Jun 2001 16:38:16 -0600
> > > > > > >>
> > > > > > >>SS.EXE should be in your local SourceSafe directory.
 Try
> >\program
> > > > > > >>files\microsoft visual studio\common\vss\win32 (or wherever

>you
> > > > > >installed
> > > > > > >>visual studio).  Does it run from the command line?
 You 
>should
> >be
> > > > >able
> > > > > >to
> > > > > > >>run "ss dir", and it should print the contents of your
current
> > > > > >SourceSafe
> > > > > > >>directory.  If you can get this to work, it should be
pretty
> >easy
> > >to
> > > > > >make
> > > > > > >>vssget work.
> > > > > > >>
> > > > > > >>-----Original Message-----
> > > > > > >>From: Pinar Bicioglu [mailto:pinarbici@hotmail.com]
> > > > > > >>Sent: Tuesday, June 05, 2001 4:26 PM
> > > > > > >>To: ant-user@jakarta.apache.org
> > > > > > >>Subject: RE: doing SourceSafe get
> > > > > > >>
> > > > > > >>
> > > > > > >>
> > > > > > >>I couldn't find ss.exe on the new server. So what I
did was 
>just
> > >to
> > > > >copy
> > > > > > >>ss.exe from the other server to the one that I currently

>getting
> > >the
> > > > > >code
> > > > > > >>from. I set ssdir to my new database on the command
line and
> >ssdir
> > > > > > >>attribute
> > > > > > >>
> > > > > > >>of vssget to where ss.exe is on the new server.
> > > > > > >>I can't test it whether it's working or not because
we all 
>have
> > >user
> > > > > >names
> > > > > > >>for login that have "space" between the characters and
we have
> >no
> > > > > > >>passwords...
> > > > > > >>So until i find out how to specify the space between
the
> > >characters
> > > >of
> > > > > >the
> > > > > > >>user name and using no password in login attribute of
vssget
> >could
> > > > > >someone
> > > > > > >>please tell me what i did for "ss.exe" would work or
not.
> > > > > > >>
> > > > > > >>thanks in a million...
> > > > > > >>
> > > > > > >> >From: "Pinar Bicioglu" <pinarbici@hotmail.com>
> > > > > > >> >Reply-To: ant-user@jakarta.apache.org
> > > > > > >> >To: ant-user@jakarta.apache.org
> > > > > > >> >Subject: RE: doing SourceSafe get
> > > > > > >> >Date: Tue, 05 Jun 2001 21:27:30 -0000
> > > > > > >> >
> > > > > > >> >
> > > > > > >> >
> > > > > > >> >
> > > > > > >> >>From: "Vittoria, Felice" <Felice_Vittoria@bmc.com>
> > > > > > >> >>Reply-To: ant-user@jakarta.apache.org
> > > > > > >> >>To: "'ant-user@jakarta.apache.org'"
> > ><ant-user@jakarta.apache.org>
> > > > > > >> >>Subject: RE: doing SourceSafe get
> > > > > > >> >>Date: Tue, 5 Jun 2001 15:05:04 -0500
> > > > > > >> >>
> > > > > > >> >>Pinar,
> > > > > > >> >>
> > > > > > >> >>Regarding my first statement:
> > > > > > >> >>
> > > > > > >> >>Well ... I found out that you need to set the
SSDIR env var
> >to
> > > >the
> > > > > > >> >>srcsafe.ini you want to open.   Here's what
I found in 
>VSS's
> > > >help:
> > > > > > >> >>
> > > > > > >> >>"Setting the SSDIR environment variable tells
VSS where to
> >find
> > > >the
> > > > > > >> >>SRCSAFE.INI file for the VSS server installation
to which 
>you
> > > >want
> > > > >to
> > > > > > >> >>connect.  Do this by typing the following at
the MS-DOS
> >prompt:
> > > > > > >> >
> > > > > > >> >
> > > > > > >> >>set ssdir=\\server\share\vss
> > > > > > >> >>
> > > > > > >> >>Where \\server\share\vss is the folder where
the 
>srcsafe.ini
> > >file
> > > > >is
> > > > > > >> >>located."
> > > > > > >> >
> > > > > > >> >I am a little confused here. When I go to file->open
> >SourceSafe
> > > > > > >>database,
> > > > > > >> >in the windows that is open, the name of the database
is 
>shown
> > > >Asset
> > > > > > >> >Planner
> > > > > > >> >2 and its path is shown \\Cds-main\VssDb\AssetPlannerII.
> > > > > > >> >And i have srcsafe.ini file in both
> > > > > > >>"\\Cds-main\VssDb\AssetPlannerII-Conf"
> > > > > > >> >and "\\Cds-main\VssDb\AssetPlannerII". But neither
if them
> >have
> > > > >worked
> > > > > > >>???
> > > > > > >> >error message
> > > > > > >> >
> > > > > > >> >D:\ap2\javasrc\server>ant getcode
> > > > > > >> >Buildfile: build.xml
> > > > > > >> >
> > > > > > >> >getcode:
> > > > > > >> >
> > > > > > >> >BUILD FAILED
> > > > > > >> >
> > > > > > >> >D:\ap2\javasrc\server\build.xml:67: java.io.IOException:
> > > > > >CreateProcess:
> > > > > > >> >\\Cds-main\VssDb\A
> > > > > > >> >ssetPlannerII-Conf\ss Get "$/Asset Planner 2" -GLD:\ap2
-I- 
>-R
> > >-W
> > > > > > >> >"-Yttraub,
> > > > > > >> >ttraub"  erro
> > > > > > >> >r=2
> > > > > > >> >--- Nested Exception ---
> > > > > > >> >java.io.IOException: CreateProcess:
> > > > > > >>\\Cds-main\VssDb\AssetPlannerII-Conf\ss
> > > > > > >> >Get "$/Asset P
> > > > > > >> >lanner 2" -GLD:\ap2 -I- -R -W "-Yttraub, ttraub"
 error=2
> > > > > > >> >        at java.lang.Win32Process.create(Native
Method)
> > > > > > >> >        at 
>java.lang.Win32Process.<init>(Win32Process.java:64)
> > > > > > >> >        at java.lang.Runtime.execInternal(Native
Method)
> > > > > > >> >        at java.lang.Runtime.exec(Runtime.java:272)
> > > > > > >> >        at
> > > > > > >>
> > > > > >
> > > > >
> > > >
> > >
> >
> >org.apache.tools.ant.taskdefs.Execute$CommandLauncher.exec(Execute.java:435
> > > > > > >>)
> > > > > > >> >        at
> > > > > > >>
> > > > > >
> > > > >
> > > >
> > >
> >
> >org.apache.tools.ant.taskdefs.Execute$CommandLauncherProxy.exec(Execute.jav
> > > > > > >>a:55
> > > > > > >> >0)
> > > > > > >> >        at
> > > > > > >>
> > > > > >
> > > > >
> > > >
> > >
> >
> >org.apache.tools.ant.taskdefs.Execute$WinNTCommandLauncher.exec(Execute.jav
> > > > > > >>a:57
> > > > > > >> >5)
> > > > > > >> >        at
> > > > > > 
> >>org.apache.tools.ant.taskdefs.Execute.execute(Execute.java:329)
> > > > > > >> >        at
> > > > > > >>
> > > > 
> >org.apache.tools.ant.taskdefs.optional.vss.MSVSS.run(MSVSS.java:160)
> > > > > > >> >        at
> > > > > > >>
> > > > > >
> > > > >
> > > >
> > >
> >
> >org.apache.tools.ant.taskdefs.optional.vss.MSVSSGET.execute(MSVSSGET.java:1
> > > > > > >>68)
> > > > > > >> >        at org.apache.tools.ant.Target.execute(Target.java,
> > > >Compiled
> > > > > > >>Code)
> > > > > > >> >        at
> > > >org.apache.tools.ant.Project.runTarget(Project.java:898)
> > > > > > >> >        at
> > > >org.apache.tools.ant.Project.executeTarget(Project.java,
> > > > > > >> >Compiled
> > > > > > >> >Code)
> > > > > > >> >        at
> > > >org.apache.tools.ant.Project.executeTargets(Project.java,
> > > > > > >> >Compiled Code)
> > > > > > >> >        at org.apache.tools.ant.Main.runBuild(Main.java,
> > >Compiled
> > > > > >Code)
> > > > > > >> >        at org.apache.tools.ant.Main.main(Main.java:149)
> > > > > > >> >
> > > > > > >> >Total time: 6 seconds
> > > > > > >> >
> > > > > > >> >I remember getting this message before but i can't
remember
> >what
> >
> > >i
> > > > >did
> > > > > > >>to
> > > > > > >> >get rid of it :(
> > > > > > >> >
> > > > > > >> >>As far as my second:
> > > > > > >> >>
> > > > > > >> >>What I meant was to open a command-line window
and, 
>assuming
> > >you
> > > > >have
> > > > > > >> >>ss.exe
> > > > > > >> >>in your path, extract the source code running
ss get.   You
> >can
> > > >see
> > > > > > >>VSS's
> > > > > > >> >>help for running ss get.   What I was trying
to get at here
> >was
> > > >to
> > > > > >not
> > > > > > >>run
> > > > > > >> >>ant's vssget but just plain ss get to extract
source code.
> > > > > > >> >
> > > > > > >> >I have ss.exe in d:\Program
> > >Files\MicrosoftVisualStudio\VSS\win32
> > > > > > >> >
> > > > > > >> >I think it's working right. when I perform ss get
from the
> > >command
> > > > > >line
> > > > > > >>it
> > > > > > >> >asks for username and pasword, but it couldn; tfind
my
> >username
> > > >and
> > > > > > >> >password
> > > > > > >> >i think it's been changed recently :)
> > > > > > >> >
> > > > > > >> >>
> > > > > > >> >>HTH,
> > > > > > >> >>Felice
> > > > > > >> >>
> > > > > > >> >>
> > > > > > >> >>
> > > > > > >> >>-----Original Message-----
> > > > > > >> >>From: Pinar Bicioglu [mailto:pinarbici@hotmail.com]
> > > > > > >> >>Sent: Tuesday, June 05, 2001 2:56 PM
> > > > > > >> >>To: ant-user@jakarta.apache.org
> > > > > > >> >>Subject: RE: doing SourceSafe get
> > > > > > >> >>
> > > > > > >> >>
> > > > > > >> >>
> > > > > > >> >>
> > > > > > >> >>
> > > > > > >> >> >From: "Vittoria, Felice" <Felice_Vittoria@bmc.com>
> > > > > > >> >> >Reply-To: ant-user@jakarta.apache.org
> > > > > > >> >> >To: "'ant-user@jakarta.apache.org'"
> > > ><ant-user@jakarta.apache.org>
> > > > > > >> >> >Subject: RE: doing SourceSafe get
> > > > > > >> >> >Date: Tue, 5 Jun 2001 14:44:13 -0500
> > > > > > >> >> >
> > > > > > >> >> >Hmm .. I guess what I meant was the database
on a 
>different
> > > > >server?
> > > > > > >>If
> > > > > > >> >> >it's
> > > > > > >> >> >on a different server then you may need
to make 
>additional
> > > > > > >>configuration
> > > > > > >> >> >changes to your PC before running ant.
> > > > > > >> >>
> > > > > > >> >>Oh I am sorry about that. yes you're right
it is on a
> >different
> > > > > >server!
> > > > > > >> >>What kind of configurations do i need to make.
Is there any
> > > > > > >>documentation
> > > > > > >> >>on
> > > > > > >> >>
> > > > > > >> >>that that i can use ??
> > > > > > >> >> >
> > > > > > >> >> >Also, if you perform the ss get command
from the
> > >command-line,
> > > > >will
> > > > > > >>it
> > > > > > >> >> >produce the same error as ant or will
it work correctly?
> > > > > > >> >>
> > > > > > >> >>I don't think that I understand what you mean.
the error
> > >message
> > > > > > >>Iposted
> > > > > > >> >>in
> > > > > > >> >>my earlier message gets generated when I write
"ant 
>getcode"
> >in
> >
> > >a
> > > > > > >>command
> > > > > > >> >>line.
> > > > > > >> >>
> > > > > > >> >> >
> > > > > > >> >> >-----Original Message-----
> > > > > > >> >> >From: Pinar Bicioglu [mailto:pinarbici@hotmail.com]
> > > > > > >> >> >Sent: Tuesday, June 05, 2001 2:39 PM
> > > > > > >> >> >To: ant-user@jakarta.apache.org
> > > > > > >> >> >Subject: RE: doing SourceSafe get
> > > > > > >> >> >
> > > > > > >> >> >
> > > > > > >> >> >
> > > > > > >> >> >It is actually both. It is different database
and 
>differen
> > > > >project.
> > > > > > >> >> >
> > > > > > >> >> >the database was APJUL2000 and the project's
name was
> > > > > >$/AP2.0{struts}
> > > > > > >> >> >before
> > > > > > >> >> >
> > > > > > >> >> >with the code below.
> > > > > > >> >> >
> > > > > > >> >> ><target name="getcode">
> > > > > > >> >> >       <vssget vsspath="$/AP2.0(struts)"
> > > > > > >> >> >          login="ttraub, ttraub"
> > > > > > >> >> >          writable="true"
> > > > > > >> >> >          localpath="D:/ap20"
> > > > > > >> >> >          recursive="true"
> > > > > > >> >> >          ssdir="D:/Program Files/Microsoft
Visual
> > > > > >Studio/VSS/win32"
> > > > > > >>/>
> > > > > > >> >> >   </target>
> > > > > > >> >> >
> > > > > > >> >> >Now the database is Asset Planner 2 and
the project's 
>name
> >is
> > > >the
> > > > > > >>same
> > > > > > >> >> >which
> > > > > > >> >> >
> > > > > > >> >> >is $/Asset Planner 2 with the following
code.
> > > > > > >> >> >
> > > > > > >> >> ><target name="getcode">
> > > > > > >> >> >       <vssget vsspath="$/Asset Planner
2"
> > > > > > >> >> >          login="ttraub, ttraub"
> > > > > > >> >> >          writable="true"
> > > > > > >> >> >          localpath="D:/ap2"
> > > > > > >> >> >          recursive="true"
> > > > > > >> >> >          ssdir="D:/Program Files/Microsoft
Visual
> > > > > >Studio/VSS/win32"
> > > > > > >>/>
> > > > > > >> >> >   </target>
> > > > > > >> >> >
> > > > > > >> >> >
> > > > > > >> >> >
> > > > > > >> >> > >From: "Vittoria, Felice" <Felice_Vittoria@bmc.com>
> > > > > > >> >> > >Reply-To: ant-user@jakarta.apache.org
> > > > > > >> >> > >To: "'ant-user@jakarta.apache.org'"
> > > > ><ant-user@jakarta.apache.org>
> > > > > > >> >> > >Subject: RE: doing  SourceSafe get
> > > > > > >> >> > >Date: Tue, 5 Jun 2001 14:15:18 -0500
> > > > > > >> >> > >
> > > > > > >> >> > >Are you getting the code from a different
database or a
> > > > >"project"
> > > > > > >> >>within
> > > > > > >> >> > >that database?   Also, what values
did you change?
> > > > > > >> >> > >
> > > > > > >> >> > >-----Original Message-----
> > > > > > >> >> > >From: Pinar Bicioglu [mailto:pinarbici@hotmail.com]
> > > > > > >> >> > >Sent: Tuesday, June 05, 2001 2:06
PM
> > > > > > >> >> > >To: ant-user@jakarta.apache.org
> > > > > > >> >> > >Subject: doing SourceSafe get
> > > > > > >> >> > >
> > > > > > >> >> > >
> > > > > > >> >> > >I worked with "vssget" task before
and it was working.
> >this
> > > > >time
> > > > > >I
> > > > > > >>had
> > > > > > >> >>to
> > > > > > >> >> > >get the code from a different database.
And somehow 
>it's
> > >not
> > > > > > >>working.
> > > > > > >> >>I
> > > > > > >> >> > >don't understand what makes the difference.
> > > > > > >> >> > >I have the code as below
> > > > > > >> >> > >
> > > > > > >> >> > ><target name="getcode">
> > > > > > >> >> > >       <vssget vsspath="$/Asset
Planner 2"
> > > > > > >> >> > >          login="pinarb, pinarb"
> > > > > > >> >> > >          writable="true"
> > > > > > >> >> > >          localpath="D:/ap2"
> > > > > > >> >> > >          recursive="true"
> > > > > > >> >> > >          ssdir="D:/Program Files/Microsoft
Visual
> > > > > > >>Studio/VSS/win32"
> > > > > > >> >>/>
> > > > > > >> >> > >   </target>
> > > > > > >> >> > >
> > > > > > >> >> > >it generates an error message like
this...
> > > > > > >> >> > >
> > > > > > >> >> > >D:\ap2\javasrc\server>ant getcode
> > > > > > >> >> > >Buildfile: build.xml
> > > > > > >> >> > >
> > > > > > >> >> > >getcode:
> > > > > > >> >> > >    [vssget] $/Asset Planner 2 is
not an existing
> >filename
> > >or
> > > > > > >>project
> > > > > > >> >> > >
> > > > > > >> >> > >BUILD FAILED
> > > > > > >> >> > >
> > > > > > >> >> > >D:\ap2\javasrc\server\build.xml:66:
Failed executing:
> > > > >"D:\Program
> > > > > > >> >> > >Files\Microsoft Visual S
> > > > > > >> >> > >tudio\VSS\win32\ss" Get "$/Asset
Planner 2" -GLD:\ap2 
>-I-
> > >-R
> > > >-W
> > > > > > >> >> >"-Yttraub,
> > > > > > >> >> > >ttraub"
> > > > > > >> >> > >
> > > > > > >> >> > >Total time: 3 seconds
> > > > > > >> >> > >
> > > > > > >> >> > >is it about changin the mode of the
file. Actually I 
>even
> > > >tried
> > > > > > >>this
> > > > > > >> >>but
> > > > > > >> >> >it
> > > > > > >> >> > >didn't work
> > > > > > >> >> >
> > > > > >_________________________________________________________________
> > > > > > >> >> > >Get your FREE download of MSN Explorer
at
> > > > >http://explorer.msn.com
> > > > > > >> >> >
> > > > > > >> >>
> > > > >_________________________________________________________________
> > > > > > >> >> >Get your FREE download of MSN Explorer
at
> > > >http://explorer.msn.com
> > > > > > >> >>
> > > > > > >>
> > > >>_________________________________________________________________
> > > > > > >> >>Get your FREE download of MSN Explorer at
> > >http://explorer.msn.com
> > > > > > >> >
> > > > > > >>
> > > >_________________________________________________________________
> > > > > > >> >Get your FREE download of MSN Explorer at
> > >http://explorer.msn.com
> > > > > > >> >
> > > > > > >>
> > > > > >
> > >>_________________________________________________________________
> > > > > > >>Get your FREE download of MSN Explorer at
> >http://explorer.msn.com
> > > > > > >
> > > > > > 
> >_________________________________________________________________
> > > > > > >Get your FREE download of MSN Explorer at 
>http://explorer.msn.com
> > > > > > >
> > > > > >
> > > > > >_________________________________________________________________
> > > > > >Get your FREE download of MSN Explorer at http://explorer.msn.com
> > > > >
> > > > >_________________________________________________________________
> > > > >Get your FREE download of MSN Explorer at http://explorer.msn.com
> > > >
> > > >_________________________________________________________________
> > > >Get your FREE download of MSN Explorer at http://explorer.msn.com
> > >
> > >_________________________________________________________________
> > >Get your FREE download of MSN Explorer at http://explorer.msn.com
> >
> >_________________________________________________________________
> >Get your FREE download of MSN Explorer at http://explorer.msn.com
>
>_________________________________________________________________
>Get your FREE download of MSN Explorer at http://explorer.msn.com

_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com


Mime
View raw message