ant-user mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From "Pinar Bicioglu" <pinarb...@hotmail.com>
Subject RE: doing SourceSafe get
Date Mon, 11 Jun 2001 17:04:52 GMT

Felice,
it is getting the code. I didn't inform you right after I saw that it was 
working because I wanted to wait until it ended. it took pretty long time 
since I was connecting the server in Europe.
What i want it to do is to check the files that have been changed in my 
working directory. If they have, it should ask for the overwrite...
However the way that ant works is slightly different right?. I mean it 
supports getting the code from source safe and based on using -I-Y or I-N it 
answers the "overwrite?" question automatically by itself. Is my 
understanding correct ??

Thanks,


>From: "Vittoria, Felice" <Felice_Vittoria@bmc.com>
>Reply-To: ant-user@jakarta.apache.org
>To: "'ant-user@jakarta.apache.org'" <ant-user@jakarta.apache.org>
>Subject: RE: doing SourceSafe get
>Date: Mon, 11 Jun 2001 11:51:24 -0500
>
>Pinar,
>
>Check the following:
>
>1) Make sure the path to ss.exe is correct.
>2) I believe you need either -I- or -I-Y or -I-N but not -I
>
>HTH,
>Felice
>
>-----Original Message-----
>From: Pinar Bicioglu [mailto:pinarbici@hotmail.com]
>Sent: Monday, June 11, 2001 8:41 AM
>To: ant-user@jakarta.apache.org
>Subject: RE: doing SourceSafe get
>
>
>Ok ihave the following;
>
><target name="getcode">
>      <exec executable="D:\Program Files\Microsoft Visual
>Studio\VSS\win32\ss.exe">
>   <arg value="get" />
>   <arg value="$$/Asset Planner 2" />
>   <arg value="-R" />
>   <arg value="-I" />
>   <arg value="-GWS" />
>   <arg value="-Yant,ant"/>
></exec>
>   </target>
>
>and it generates the message below,
>
>D:\ap2\javasrc\server>ant getcode
>Buildfile: build.xml
>
>getcode:
>
>and just hangs there.. ssdir has been set. I thought I was close. I think I
>am messing up with something here. :(
>
>Thanks
>
> >From: "Vittoria, Felice" <Felice_Vittoria@bmc.com>
> >Reply-To: ant-user@jakarta.apache.org
> >To: "'ant-user@jakarta.apache.org'" <ant-user@jakarta.apache.org>
> >Subject: RE: doing SourceSafe get
> >Date: Fri, 8 Jun 2001 16:24:59 -0500
> >
> >Yup ... that did it.  So Pinar ... use $$ and see what happens
> >
> >-----Original Message-----
> >From: Nesbitt, David [mailto:DNesbitt@gensys.com]
> >Sent: Friday, June 08, 2001 4:20 PM
> >To: ant-user@jakarta.apache.org
> >Cc: Nesbitt, David
> >Subject: RE: doing SourceSafe get
> >
> >
> >I believe the '$' character needs to be escaped, so
> >
> > >           <arg value="$/Tke" />
> >
> >should be
> >
> >             <arg value="$$/Tke" />
> >
> >Please try that and see if it works.
> >
> >Regards,
> >Dave
> >
> >-----Original Message-----
> >From: Pinar Bicioglu [mailto:pinarbici@hotmail.com]
> >Sent: Friday, June 08, 2001 2:19 PM
> >To: ant-user@jakarta.apache.org
> >Subject: RE: doing SourceSafe get
> >
> >
> >
> >Felice I really appreciate your help..So do you mean that there is no
> >solution for it ? ?
> >
> > >From: "Vittoria, Felice" <Felice_Vittoria@bmc.com>
> > >Reply-To: ant-user@jakarta.apache.org
> > >To: "'ant-user@jakarta.apache.org'" <ant-user@jakarta.apache.org>
> > >Subject: RE: doing SourceSafe get
> > >Date: Fri, 8 Jun 2001 16:12:43 -0500
> > >
> > >Pinar (and everyone else),
> > >
> > >I found out something interesting.   I have the following build.xml:
> > >
> > ><target name="setworkfolder">
> > >        <exec executable="D:\Program Files\Microsoft Visual
> > >Studio\Common\VSS\win32\ss.exe">
> > >           <arg value="workfold" />
> > >           <arg value="$/Tke" />
> > >           <arg value="D:\VSSTest" />
> > >        </exec>
> > ></target>
> > >
> > >If I run: ant -debug
> > >
> > >I will get:
> > >
> > >Detected Java Version: 1.2
> > >Detected OS: Windows NT
> > >parsing buildfile U:\ant\build.xml with URI = file:U:/ant/build.xml
> > >Project base dir set to: U:\ant
> > >
> > >[snip]
> > >
> > >setworkfolder:
> > >      [exec] Myos = Windows NT
> > >      [exec] "D:\Program Files\Microsoft Visual
> > >Studio\Common\VSS\win32\ss.exe" workfold /Tke D:\VSST
> > >est
> > >
> > >[snip]
> > >
> > >Anyway, what I wanted to point out is that $/Tke was not read
> >correctly.
> > >It
> > >was read as /Tke but it should be $/Tke.  I think this is causing the
> >hang
> > >problem.   When I run
> > >
> > >D:\Program Files\Microsoft Visual Studio\Common\VSS\win32\ss.exe
> >workfold
> > >/Tke D:\VSSTest
> > >
> > >I get:
> > >
> > >/Tke is not a valid switch, and will be ignored.
> > >Continue anyway?(Y/N)n
> > >
> > >Felice
> > >
> > >-----Original Message-----
> > >From: Pinar Bicioglu [mailto:pinarbici@hotmail.com]
> > >Sent: Friday, June 08, 2001 3:49 PM
> > >To: ant-user@jakarta.apache.org
> > >Subject: RE: doing SourceSafe get
> > >
> > >
> > >
> > >I did. Same thing happens...it's as following...
> > >
> > >D:\ap2\javasrc\server>ant getcode
> > >Buildfile: build.xml
> > >
> > >getcode:
> > >
> > >
> > > >From: "Vittoria, Felice" <Felice_Vittoria@bmc.com>
> > > >Reply-To: ant-user@jakarta.apache.org
> > > >To: "'ant-user@jakarta.apache.org'" <ant-user@jakarta.apache.org>
> > > >Subject: RE: doing SourceSafe get
> > > >Date: Fri, 8 Jun 2001 15:26:07 -0500
> > > >
> > > >Ok ... can you change -I to -I-Y and see what happens?
> > > >
> > > >-----Original Message-----
> > > >From: Pinar Bicioglu [mailto:pinarbici@hotmail.com]
> > > >Sent: Friday, June 08, 2001 3:17 PM
> > > >To: ant-user@jakarta.apache.org
> > > >Subject: RE: doing SourceSafe get
> > > >
> > > >
> > > >the script is following;
> > > >
> > > ><target name="getcode">
> > > >      <exec executable="D:\Program Files\Microsoft Visual
> > > >Studio\VSS\win32\ss.exe">
> > > >   <arg value="get" />
> > > >   <arg value="$/Asset Planner 2" />
> > > >   <arg value="-R" />
> > > >   <arg value="-I" />
> > > >   <arg value="-GWS" />
> > > >   <arg value="-Yant,ant"/>
> > > ></exec>
> > > >   </target>
> > > >
> > > >it's almost finished. then I perform "ant getcode" from the command
> >line
> > > >
> > > >
> > > >
> > > >
> > > > >From: "Vittoria, Felice" <Felice_Vittoria@bmc.com>
> > > > >Reply-To: ant-user@jakarta.apache.org
> > > > >To: "'ant-user@jakarta.apache.org'" <ant-user@jakarta.apache.org>
> > > > >Subject: RE: doing SourceSafe get
> > > > >Date: Fri, 8 Jun 2001 15:08:43 -0500
> > > > >
> > > > >Ok ... what's the script again?
> > > > >
> > > > >-----Original Message-----
> > > > >From: Pinar Bicioglu [mailto:pinarbici@hotmail.com]
> > > > >Sent: Friday, June 08, 2001 3:04 PM
> > > > >To: ant-user@jakarta.apache.org
> > > > >Subject: RE: doing SourceSafe get
> > > > >
> > > > >
> > > > >
> > > > >oopps .. I'd written $AssetPlanner 2 instead of $/AssetPlanner 2.
> >Now
> > > >it's
> > > > >getting the code. But it's not working when I use the script to get
> >the
> > > > >code
> > > > >
> > > > > >From: "Pinar Bicioglu" <pinarbici@hotmail.com>
> > > > > >Reply-To: ant-user@jakarta.apache.org
> > > > > >To: ant-user@jakarta.apache.org
> > > > > >Subject: RE: doing SourceSafe get
> > > > > >Date: Fri, 08 Jun 2001 19:55:19 -0000
> > > > > >
> > > > > >the output i get is,
> > > > > >
> > > > > >D:\Program Files\Microsoft Visual Studio\VSS\win32>ss get "$Asset
> > > >Planner
> > > > > >2"
> > > > > >-R
> > > > > >-Yant, ant
> > > > > >Username: ant
> > > > > >Password: ant
> > > > > >$Asset Planner 2 is not an existing filename or project
> > > > > >ant is not an existing filename or project
> > > > > >
> > > > > >but it's an existing file ??? :(
> > > > > >>From: "Vittoria, Felice" <Felice_Vittoria@bmc.com>
> > > > > >>Reply-To: ant-user@jakarta.apache.org
> > > > > >>To: "'ant-user@jakarta.apache.org'"
> ><ant-user@jakarta.apache.org>
> > > > > >>Subject: RE: doing SourceSafe get
> > > > > >>Date: Fri, 8 Jun 2001 14:48:08 -0500
> > > > > >>
> > > > > >>Actually, what I was looking for is the command that you entered
> >on
> > > >the
> > > > > >>command-line.   That is, assuming you did the following:
> > > > > >>
> > > > > >>cd D:\Program Files\Microsoft Visual Studio\VSS\win32
> > > > > >>D:\Program Files\Microsoft Visual Studio\VSS\win32>ss get
> >"$/Asset
> > > > >Planner
> > > > > >>2" -R -I-Y -GWS -Yant,ant
> > > > > >>
> > > > > >>what did you get as output?  Note: ensure that the user has
> >access
> > >to
> > > > >the
> > > > > >>repository.
> > > > > >>
> > > > > >>Felice
> > > > > >>
> > > > > >>-----Original Message-----
> > > > > >>From: Pinar Bicioglu [mailto:pinarbici@hotmail.com]
> > > > > >>Sent: Friday, June 08, 2001 2:41 PM
> > > > > >>To: ant-user@jakarta.apache.org
> > > > > >>Subject: RE: doing SourceSafe get
> > > > > >>
> > > > > >>
> > > > > >>here is the code I have;
> > > > > >>
> > > > > >><target name="getcode">
> > > > > >>      <exec executable="D:\Program Files\Microsoft Visual
> > > > > >>Studio\VSS\win32\ss.exe">
> > > > > >>   <arg value="get" />
> > > > > >>   <arg value="$/Asset Planner 2" />
> > > > > >>   <arg value="-R" />
> > > > > >>   <arg value="-I" />
> > > > > >>   <arg value="-GWS" />
> > > > > >>   <arg value="-Yant,ant"/>
> > > > > >></exec>
> > > > > >>   </target>
> > > > > >>
> > > > > >>and here is the code it generates
> > > > > >>
> > > > > >>D:\ap2\javasrc\server>ant getcode
> > > > > >>Buildfile: build.xml
> > > > > >>
> > > > > >>getcode:
> > > > > >>and it just hang there...
> > > > > >>
> > > > > >> >From: "Vittoria, Felice" <Felice_Vittoria@bmc.com>
> > > > > >> >Reply-To: ant-user@jakarta.apache.org
> > > > > >> >To: "'ant-user@jakarta.apache.org'"
> ><ant-user@jakarta.apache.org>
> > > > > >> >Subject: RE: doing SourceSafe get
> > > > > >> >Date: Fri, 8 Jun 2001 14:24:01 -0500
> > > > > >> >
> > > > > >> >Ok ... can you supply the command that you are trying to run
> > > > > >> >
> > > > > >> >Thanks.
> > > > > >> >
> > > > > >> >-----Original Message-----
> > > > > >> >From: Pinar Bicioglu [mailto:pinarbici@hotmail.com]
> > > > > >> >Sent: Friday, June 08, 2001 2:15 PM
> > > > > >> >To: ant-user@jakarta.apache.org
> > > > > >> >Subject: RE: doing SourceSafe get
> > > > > >> >
> > > > > >> >
> > > > > >> >
> > > > > >> >
> > > > > >> >Felice,
> > > > > >> >I am using diffrent username that is on the server already. It
> > > >accepts
> > > > > >>that
> > > > > >> >but still says "unrecognizable command : -I-Y"
> > > > > >> >
> > > > > >> >and my ssdir is set to where my rpoject is on the server
> > > > > >> >
> > > > > >> > >From: "Vittoria, Felice" <Felice_Vittoria@bmc.com>
> > > > > >> > >Reply-To: ant-user@jakarta.apache.org
> > > > > >> > >To: "'ant-user@jakarta.apache.org'"
> > ><ant-user@jakarta.apache.org>
> > > > > >> > >Subject: RE: doing SourceSafe get
> > > > > >> > >Date: Fri, 8 Jun 2001 14:02:43 -0500
> > > > > >> > >
> > > > > >> > >Pinar,
> > > > > >> > >
> > > > > >> > >Add your username (pbicioglu) to the database you are trying
> >to
> > > > > >>connect
> > > > > >> >to
> > > > > >> > >and then try the command-line thing again.  Oh .. make sure
> >your
> > > > > >>username
> > > > > >> > >has access to the server.    Do you have the SSDIR env var
> >set?
> > > > > >> > >
> > > > > >> > >As far as I-Y ... it should be -I-Y.
> > > > > >> > >
> > > > > >> > >Felice
> > > > > >> > >
> > > > > >> > >-----Original Message-----
> > > > > >> > >From: Pinar Bicioglu [mailto:pinarbici@hotmail.com]
> > > > > >> > >Sent: Friday, June 08, 2001 1:42 PM
> > > > > >> > >To: ant-user@jakarta.apache.org
> > > > > >> > >Subject: RE: doing SourceSafe get
> > > > > >> > >
> > > > > >> > >
> > > > > >> > >
> > > > > >> > >when I run ss.exe from the command line with the same
> >options it
> > > > > >>prints
> > > > > >> >out
> > > > > >> > >"username=pbicioglu(my NT username) and asks for the
> >password.
> > > >Since
> > > > > >>my
> > > > > >> > >username is different for the access on the server I skipped
> >the
> > > > > >>password
> > > > > >> > >part (then it prints "user name not found) and enter the
> > > >appropriate
> > > > > >> > >username and password it accepts that then says
> >"unrecognized
> > > > >command
> > > > > >>I-Y
> > > > > >> > >Or
> > > > > >> > >
> > > > > >> > >I (i tried both).........
> > > > > >> > >
> > > > > >> > > >From: "Peterson, Lance" <lpeterson@verticore.com>
> > > > > >> > > >Reply-To: ant-user@jakarta.apache.org
> > > > > >> > > >To: "'ant-user@jakarta.apache.org'"
> > > ><ant-user@jakarta.apache.org>
> > > > > >> > > >Subject: RE: doing SourceSafe get
> > > > > >> > > >Date: Fri, 8 Jun 2001 09:21:44 -0600
> > > > > >> > > >
> > > > > >> > > >Have you tried running SS.EXE from the command line with
> >the
> > > >same
> > > > > >> > >options?
> > > > > >> > > >What does it do?  This will tell you what's hanging in
> ><exec>.
> > > > > >> > > >
> > > > > >> > > >-----Original Message-----
> > > > > >> > > >From: Pinar Bicioglu [mailto:pinarbici@hotmail.com]
> > > > > >> > > >Sent: Friday, June 08, 2001 9:00 AM
> > > > > >> > > >To: ant-user@jakarta.apache.org
> > > > > >> > > >Subject: RE: doing SourceSafe get
> > > > > >> > > >
> > > > > >> > > >
> > > > > >> > > >
> > > > > >> > > >thanks for your help Felice but it didn't make any
> >difference
> > > > >...:(
> > > > > >> > > >I can't think of anything else to solve this problem!
> > > > > >> > > >
> > > > > >> > > > >From: "Vittoria, Felice" <Felice_Vittoria@bmc.com>
> > > > > >> > > > >Reply-To: ant-user@jakarta.apache.org
> > > > > >> > > > >To: "'ant-user@jakarta.apache.org'"
> > > > ><ant-user@jakarta.apache.org>
> > > > > >> > > > >Subject: RE: doing SourceSafe get
> > > > > >> > > > >Date: Fri, 8 Jun 2001 09:29:46 -0500
> > > > > >> > > > >
> > > > > >> > > > >Hmm ... maybe it's hanging because of the -I- argument.
> >I
> > > >think
> > > > > >>that
> > > > > >> > >you
> > > > > >> > > > >need to change it to either a -I-Y or -I-N.
> > > > > >> > > > >
> > > > > >> > > > >Here's the help page from VSS regarding this
> >command-line
> > > > >option:
> > > > > >> > > > >
> > > > > >> > > > >-I Command-Line Option
> > > > > >> > > > >There are a number of circumstances when VSS commands
> >ask
> > >for
> > > > > >>input
> > > > > >> > >from
> > > > > >> > > > >the
> > > > > >> > > > >user (for example, warnings containing Yes or No
> >questions).
> > > > >This
> > > > > >>is
> > > > > >> > >not
> > > > > >> > > > >desirable when writing scripts or macros that execute
> >the
> > >VSS
> > > > > >>command
> > > > > >> > > >line
> > > > > >> > > > >from inside other programs. Use the -I- option to ensure
> >
> > >that
> > > > >VSS
> > > > > >> >never
> > > > > >> > > > >asks
> > > > > >> > > > >for user input.
> > > > > >> > > > >
> > > > > >> > > > >When using the -I option, include the -C option to avoid
> >the
> > > > > >>comment
> > > > > >> > > > >prompt.
> > > > > >> > > > >
> > > > > >> > > > >The following table lists ways to use the -I option.
> > > > > >> > > > >
> > > > > >> > > > >Option Description
> > > > > >> > > > >-I-Y Instructs VSS to answer Yes to all Yes or No
> >questions.
> > > > > >> > > > >-I-N Instructs VSS to answer No to all Yes or No
> >questions.
> > > > > >> > > > >
> > > > > >> > > > >HTH,
> > > > > >> > > > >Felice
> > > > > >> > > > >
> > > > > >> > > > >-----Original Message-----
> > > > > >> > > > >From: Pinar Bicioglu [mailto:pinarbici@hotmail.com]
> > > > > >> > > > >Sent: Friday, June 08, 2001 9:22 AM
> > > > > >> > > > >To: ant-user@jakarta.apache.org
> > > > > >> > > > >Subject: RE: doing SourceSafe get
> > > > > >> > > > >
> > > > > >> > > > >
> > > > > >> > > > >
> > > > > >> > > > >i already tried this. It stil just hangs there...After
> > >waiting
> > > > >for
> > > > > >>a
> > > > > >> > > >while
> > > > > >> > > > >I
> > > > > >> > > > >
> > > > > >> > > > >terminated the program by entering ctrl+C and here is
> >the
> > > > >message
> > > > > >>I
> > > > > >> >got
> > > > > >> > > > >
> > > > > >> > > > >D:\ap2\javasrc\server>ant getcode
> > > > > >> > > > >Buildfile: build.xml
> > > > > >> > > > >
> > > > > >> > > > >getcode:
> > > > > >> > > > >      [exec] Username: ant
> > > > > >> > > > >^CTerminate batch job (Y/N)?
> > > > > >> > > > >d:\jdk1.2.2\bin\java.exe was unexpected at this time.
> > > > > >> > > > >
> > > > > >> > > > >thanks for your help! :)
> > > > > >> > > > >
> > > > > >> > > > >
> > > > > >> > > > > >From: Jeff Post <jeffp@genesyslab.com>
> > > > > >> > > > > >Reply-To: ant-user@jakarta.apache.org
> > > > > >> > > > > >To: "'ant-user@jakarta.apache.org'"
> > > > > >><ant-user@jakarta.apache.org>
> > > > > >> > > > > >Subject: RE: doing SourceSafe get
> > > > > >> > > > > >Date: Thu, 7 Jun 2001 13:51:43 -0700
> > > > > >> > > > > >
> > > > > >> > > > > >I think it is hanging because it is waiting for a
> > >password.
> > > > >Try
> > > > > >> ><arg
> > > > > >> > > > > >value="-Yant,ant" /> (remove the space) and see if
> >that
> > > >works.
> > > > > >> > > > > >
> > > > > >> > > > > >JP
> > > > > >> > > > > >
> > > > > >> > > > > >-----Original Message-----
> > > > > >> > > > > >From: Pinar Bicioglu [mailto:pinarbici@hotmail.com]
> > > > > >> > > > > >Sent: Thursday, June 07, 2001 1:17 PM
> > > > > >> > > > > >To: ant-user@jakarta.apache.org
> > > > > >> > > > > >Subject: RE: doing SourceSafe get
> > > > > >> > > > > >
> > > > > >> > > > > >
> > > > > >> > > > > >
> > > > > >> > > > > >in my earlier message I'd asked about "-Y"
> > > > > >> > > > > >the user name and password I have is  "ant, ant"
> > > > > >> > > > > >So when I write "<arg value="-Yant, ant" />, i get the
> > > > >following
> > > > > >> > > > > >
> > > > > >> > > > > >D:\ap2\javasrc\server>ant getcode
> > > > > >> > > > > >Buildfile: build.xml
> > > > > >> > > > > >
> > > > > >> > > > > >getcode:
> > > > > >> > > > > >      [exec] Username: ant
> > > > > >> > > > > >
> > > > > >> > > > > >then it just hangs there !!
> > > > > >> > > > > >
> > > > > >> > > > > > >From: Jeff Post <jeffp@genesyslab.com>
> > > > > >> > > > > > >Reply-To: ant-user@jakarta.apache.org
> > > > > >> > > > > > >To: "'ant-user@jakarta.apache.org'"
> > > > > >><ant-user@jakarta.apache.org>
> > > > > >> > > > > > >Subject: RE: doing SourceSafe get
> > > > > >> > > > > > >Date: Thu, 7 Jun 2001 12:48:07 -0700
> > > > > >> > > > > > >
> > > > > >> > > > > > >You don't use "exec task with vssget". Instead of
> >using
> > > >the
> > > > > >>task
> > > > > >> > > > >vssget,
> > > > > >> > > > > > >you
> > > > > >> > > > > > >use the task exec.
> > > > > >> > > > > > >
> > > > > >> > > > > > >His example shows how to use that task:
> > > > > >> > > > > > >
> > > > > >> > > > > > >     Example:
> > > > > >> > > > > > >
> > > > > >> > > > > > >     <exec executable="${ss.path}/ss.exe">
> > > > > >> > > > > > >        <arg value="get" />
> > > > > >> > > > > > >        <arg value="${project}" />
> > > > > >> > > > > > >        <arg value="-R" />
> > > > > >> > > > > > >        <arg value="-I-" />
> > > > > >> > > > > > >        <arg value="-GWS" />
> > > > > >> > > > > > >        <arg value="-Y${ss.user},${ss.pass}" />
> > > > > >> > > > > > >     </exec>
> > > > > >> > > > > > >
> > > > > >> > > > > > >JP
> > > > > >> > > > > > >
> > > > > >> > > > > > >-----Original Message-----
> > > > > >> > > > > > >From: Pinar Bicioglu [mailto:pinarbici@hotmail.com]
> > > > > >> > > > > > >Sent: Thursday, June 07, 2001 12:40 PM
> > > > > >> > > > > > >To: ant-user@jakarta.apache.org
> > > > > >> > > > > > >Subject: RE: doing SourceSafe get
> > > > > >> > > > > > >
> > > > > >> > > > > > >
> > > > > >> > > > > > >
> > > > > >> > > > > > >this helped a lot..I've got something to work on
> >now. So
> > > > >it's
> > > > > >>not
> > > > > >> > > > >working
> > > > > >> > > > > > >correcty.
> > > > > >> > > > > > >What I don;t understand is how to use exec task with
> > > >vssget.
> > > >
> > > > >I
> > > > > >> >mean
> > > > > >> > > > >what
> > > > > >> > > > > >is
> > > > > >> > > > > > >the right way to execute vssget with "-GWS" option
> >??
> > > > > >> > > > > > >Thanks
> > > > > >> > > > > > >
> > > > > >> > > > > > > >From: "Peterson, Lance" <lpeterson@verticore.com>
> > > > > >> > > > > > > >Reply-To: ant-user@jakarta.apache.org
> > > > > >> > > > > > > >To: "'ant-user@jakarta.apache.org'"
> > > > > >> ><ant-user@jakarta.apache.org>
> > > > > >> > > > > > > >Subject: RE: doing SourceSafe get
> > > > > >> > > > > > > >Date: Thu, 7 Jun 2001 12:56:53 -0600
> > > > > >> > > > > > > >
> > > > > >> > > > > > > >SS.EXE has many command-line options.  For
> >example,
> > > > >running
> > > > > >>the
> > > > > >> > > > >command
> > > > > >> > > > > > >"ss
> > > > > >> > > > > > > >get $/dev/project1/src -R -I-" instructs
> >SourceSafe to
> > > > > >> > >recursively
> > > > > >> > > > >get
> > > > > >> > > > > > >all
> > > > > >> > > > > > > >files from the $/dev/project1/src project.  If you
> >
> > >want
> > > >to
> > > > > >>make
> > > > > >> > > >sure
> > > > > >> > > > > > > >SourceSafe does not overwrite your checked-out
> >files,
> > > >you
> > > > > >>can
> > > > > >> >add
> > > > > >> > > >the
> > > > > >> > > > > > >-GWS
> > > > > >> > > > > > > >option.
> > > > > >> > > > > > > >
> > > > > >> > > > > > > ><vssget> does not support the -GWS option.  So
> > >therefore
> > > > >you
> > > > > >> >can
> > > > > >> > > >use
> > > > > >> > > > > >the
> > > > > >> > > > > > > ><exec> task to call SS.EXE directly and pass it
> >the
> > >-GWS
> > > > > >>option
> > > > > >> > > >using
> > > > > >> > > > > >the
> > > > > >> > > > > > > ><arg> element.
> > > > > >> > > > > > > >
> > > > > >> > > > > > > >Example:
> > > > > >> > > > > > > >
> > > > > >> > > > > > > ><exec executable="${ss.path}/ss.exe">
> > > > > >> > > > > > > >   <arg value="get" />
> > > > > >> > > > > > > >   <arg value="${project}" />
> > > > > >> > > > > > > >   <arg value="-R" />
> > > > > >> > > > > > > >   <arg value="-I-" />
> > > > > >> > > > > > > >   <arg value="-GWS" />
> > > > > >> > > > > > > >   <arg value="-Y${ss.user},${ss.pass}" />
> > > > > >> > > > > > > ></exec>
> > > > > >> > > > > > > >
> > > > > >> > > > > > > >where...
> > > > > >> > > > > > > >
> > > > > >> > > > > > > >${ss.path} is the path to SS.EXE (usually
> >c:\program
> > > > > >> > > >files\microsoft
> > > > > >> > > > > > >visual
> > > > > >> > > > > > > >studio\common\vss\win32).
> > > > > >> > > > > > > >${project} is the project path (i.e.
> >$/Dev/source).
> > > > > >> > > > > > > >${ss.user} and ${ss.pass} are username and
> >password.
> > > > > >> > > > > > > >
> > > > > >> > > > > > > >Hope this helps!
> > > > > >> > > > > > > >
> > > > > >> > > > > > > >-----Original Message-----
> > > > > >> > > > > > > >From: Pinar Bicioglu
> >[mailto:pinarbici@hotmail.com]
> > > > > >> > > > > > > >Sent: Thursday, June 07, 2001 10:50 AM
> > > > > >> > > > > > > >To: ant-user@jakarta.apache.org
> > > > > >> > > > > > > >Subject: RE: doing SourceSafe get
> > > > > >> > > > > > > >
> > > > > >> > > > > > > >
> > > > > >> > > > > > > >
> > > > > >> > > > > > > >I checked the source safe and ant doc but couldn't
> >
> > >come
> > > >up
> > > > > >>with
> > > > > >> > > > > >anything
> > > > > >> > > > > > > >useful :(
> > > > > >> > > > > > > >So what I understand from this is that I can
> >control
> > > >which
> > > > > >>file
> > > > > >> > >to
> > > > > >> > > > >get
> > > > > >> > > > > > >form
> > > > > >> > > > > > > >the sourcesafe when i perform "ant getcode" from
> >the
> > > > >command
> > > > > >> >line
> > > > > >> > > > > > > >Is that correct ?
> > > > > >> > > > > > > >
> > > > > >> > > > > > > > >From: "Peterson, Lance"
> ><lpeterson@verticore.com>
> > > > > >> > > > > > > > >Reply-To: ant-user@jakarta.apache.org
> > > > > >> > > > > > > > >To: "'ant-user@jakarta.apache.org'"
> > > > > >> > ><ant-user@jakarta.apache.org>
> > > > > >> > > > > > > > >Subject: RE: doing SourceSafe get
> > > > > >> > > > > > > > >Date: Wed, 6 Jun 2001 15:10:26 -0600
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > > >You can control overwrites by using the <exec>
> >task
> > >to
> > > > > >>call
> > > > > >> > > >SS.EXE
> > > > > >> > > > > > > >directly
> > > > > >> > > > > > > > >and passing the correct options (see the
> >SourceSafe
> > > > > >> > > >documentation).
> > > > > >> > > > > > > > ><vssget> does not have this capability.
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > > >-----Original Message-----
> > > > > >> > > > > > > > >From: Pinar Bicioglu
> >[mailto:pinarbici@hotmail.com]
> > > > > >> > > > > > > > >Sent: Wednesday, June 06, 2001 2:32 PM
> > > > > >> > > > > > > > >To: ant-user@jakarta.apache.org
> > > > > >> > > > > > > > >Subject: RE: doing SourceSafe get
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > > >Here is another problem we found about "vssget"
> >task
> > > > > >>....If
> > > > > >> >you
> > > > > >> > > > >have
> > > > > >> > > > > > > > >checked
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > > >out a file and changed it, vssget will overwrite
> >
> > >your
> > > > >file
> > > > > >> > > >without
> > > > > >> > > > > > >asking
> > > > > >> > > > > > > > >you. is there a way to say  "do not overwrite
> >file
> > >if
> > > > > >>checked
> > > > > >> > > >out"
> > > > > >> > > > >or
> > > > > >> > > > > > >"do
> > > > > >> > > > > > > > >not overwrite a file which is not read-only".
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > > >Thanks
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > > > >From: "Pinar Bicioglu" <pinarbici@hotmail.com>
> > > > > >> > > > > > > > > >Reply-To: ant-user@jakarta.apache.org
> > > > > >> > > > > > > > > >To: ant-user@jakarta.apache.org
> > > > > >> > > > > > > > > >Subject: RE: doing SourceSafe get
> > > > > >> > > > > > > > > >Date: Tue, 05 Jun 2001 22:48:55 -0000
> > > > > >> > > > > > > > > >
> > > > > >> > > > > > > > > >
> > > > > >> > > > > > > > > >yes you're right it is in there. Actually i
> >knew
> > > >that
> > > > >it
> > > > > >> >was
> > > > > >> > > > >there.
> > > > > >> > > > > > >but
> > > > > >> > > > > > > > > >since I am using a server in Europe I thought
> > >there
> > > > > >>should
> > > > > >> >be
> > > > > >> > > > > >another
> > > > > >> > > > > > > >one
> > > > > >> > > > > > > > > >on
> > > > > >> > > > > > > > > >that server!!
> > > > > >> > > > > > > > > >It seems like it is working now. The only
> >thing
> > >that
> > >
> > > >I
> > > > > >>need
> > > > > >> > >to
> > > > > >> > > >be
> > > > > >> > > > > > >done
> > > > > >> > > > > > > > >with
> > > > > >> > > > > > > > > >is that to write a login attribute without
> > > >specifying
> > > > >a
> > > > > >> > > >password
> > > > > >> > > > >:)
> > > > > >> > > > > > > > > >
> > > > > >> > > > > > > > > >Or I can get a new user name and password
> > > >collections,
> > > > > >>but
> > > > > >> > >the
> > > > > >> > > > > >person
> > > > > >> > > > > > > >who
> > > > > >> > > > > > > > > >takes care of this stuff is in Europe and he
> > > >probably
> > > > >is
> > > > > >> > > >slepping
> > > > > >> > > > > > >right
> > > > > >> > > > > > > > >now
> > > > > >> > > > > > > > > >because it's midnight over there :)
> > > > > >> > > > > > > > > >
> > > > > >> > > > > > > > > >i want to get over with vssget today before I
> > >leave
> > > >:)
> > > > > >> > > > > > > > > >
> > > > > >> > > > > > > > > >Thanks a lot for your help :)
> > > > > >> > > > > > > > > >
> > > > > >> > > > > > > > > >>From: "Peterson, Lance"
> ><lpeterson@verticore.com>
> > > > > >> > > > > > > > > >>Reply-To: ant-user@jakarta.apache.org
> > > > > >> > > > > > > > > >>To: "'ant-user@jakarta.apache.org'"
> > > > > >> > > > ><ant-user@jakarta.apache.org>
> > > > > >> > > > > > > > > >>Subject: RE: doing SourceSafe get
> > > > > >> > > > > > > > > >>Date: Tue, 5 Jun 2001 16:38:16 -0600
> > > > > >> > > > > > > > > >>
> > > > > >> > > > > > > > > >>SS.EXE should be in your local SourceSafe
> > > >directory.
> > > > > >>Try
> > > > > >> > > > >\program
> > > > > >> > > > > > > > > >>files\microsoft visual
> >studio\common\vss\win32
> > >(or
> > > > > >> >wherever
> > > > > >> > > >you
> > > > > >> > > > > > > > >installed
> > > > > >> > > > > > > > > >>visual studio).  Does it run from the command
> >
> > >line?
> > > > > >>You
> > > > > >> > > >should
> > > > > >> > > > >be
> > > > > >> > > > > > > >able
> > > > > >> > > > > > > > >to
> > > > > >> > > > > > > > > >>run "ss dir", and it should print the
> >contents of
> > > > >your
> > > > > >> > >current
> > > > > >> > > > > > > > >SourceSafe
> > > > > >> > > > > > > > > >>directory.  If you can get this to work, it
> > >should
> > > >be
> > > > > >> >pretty
> > > > > >> > > > >easy
> > > > > >> > > > > >to
> > > > > >> > > > > > > > >make
> > > > > >> > > > > > > > > >>vssget work.
> > > > > >> > > > > > > > > >>
> > > > > >> > > > > > > > > >>-----Original Message-----
> > > > > >> > > > > > > > > >>From: Pinar Bicioglu
> > >[mailto:pinarbici@hotmail.com]
> > > > > >> > > > > > > > > >>Sent: Tuesday, June 05, 2001 4:26 PM
> > > > > >> > > > > > > > > >>To: ant-user@jakarta.apache.org
> > > > > >> > > > > > > > > >>Subject: RE: doing SourceSafe get
> > > > > >> > > > > > > > > >>
> > > > > >> > > > > > > > > >>
> > > > > >> > > > > > > > > >>
> > > > > >> > > > > > > > > >>I couldn't find ss.exe on the new server. So
> >what
> > >I
> > > > >did
> > > > > >> >was
> > > > > >> > > >just
> > > > > >> > > > > >to
> > > > > >> > > > > > > >copy
> > > > > >> > > > > > > > > >>ss.exe from the other server to the one that
> >I
> > > > > >>currently
> > > > > >> > > >getting
> > > > > >> > > > > >the
> > > > > >> > > > > > > > >code
> > > > > >> > > > > > > > > >>from. I set ssdir to my new database on the
> > >command
> > > > > >>line
> > > > > >> >and
> > > > > >> > > > >ssdir
> > > > > >> > > > > > > > > >>attribute
> > > > > >> > > > > > > > > >>
> > > > > >> > > > > > > > > >>of vssget to where ss.exe is on the new
> >server.
> > > > > >> > > > > > > > > >>I can't test it whether it's working or not
> > >because
> > > > >we
> > > > > >>all
> > > > > >> > > >have
> > > > > >> > > > > >user
> > > > > >> > > > > > > > >names
> > > > > >> > > > > > > > > >>for login that have "space" between the
> > >characters
> > > > >and
> > > > > >>we
> > > > > >> > >have
> > > > > >> > > > >no
> > > > > >> > > > > > > > > >>passwords...
> > > > > >> > > > > > > > > >>So until i find out how to specify the space
> > > >between
> > > > > >>the
> > > > > >> > > > > >characters
> > > > > >> > > > > > >of
> > > > > >> > > > > > > > >the
> > > > > >> > > > > > > > > >>user name and using no password in login
> > >attribute
> > > >of
> > > > > >> >vssget
> > > > > >> > > > >could
> > > > > >> > > > > > > > >someone
> > > > > >> > > > > > > > > >>please tell me what i did for "ss.exe" would
> >work
> > > >or
> > > > > >>not.
> > > > > >> > > > > > > > > >>
> > > > > >> > > > > > > > > >>thanks in a million...
> > > > > >> > > > > > > > > >>
> > > > > >> > > > > > > > > >> >From: "Pinar Bicioglu"
> ><pinarbici@hotmail.com>
> > > > > >> > > > > > > > > >> >Reply-To: ant-user@jakarta.apache.org
> > > > > >> > > > > > > > > >> >To: ant-user@jakarta.apache.org
> > > > > >> > > > > > > > > >> >Subject: RE: doing SourceSafe get
> > > > > >> > > > > > > > > >> >Date: Tue, 05 Jun 2001 21:27:30 -0000
> > > > > >> > > > > > > > > >> >
> > > > > >> > > > > > > > > >> >
> > > > > >> > > > > > > > > >> >
> > > > > >> > > > > > > > > >> >
> > > > > >> > > > > > > > > >> >>From: "Vittoria, Felice"
> > > ><Felice_Vittoria@bmc.com>
> > > > > >> > > > > > > > > >> >>Reply-To: ant-user@jakarta.apache.org
> > > > > >> > > > > > > > > >> >>To: "'ant-user@jakarta.apache.org'"
> > > > > >> > > > > ><ant-user@jakarta.apache.org>
> > > > > >> > > > > > > > > >> >>Subject: RE: doing SourceSafe get
> > > > > >> > > > > > > > > >> >>Date: Tue, 5 Jun 2001 15:05:04 -0500
> > > > > >> > > > > > > > > >> >>
> > > > > >> > > > > > > > > >> >>Pinar,
> > > > > >> > > > > > > > > >> >>
> > > > > >> > > > > > > > > >> >>Regarding my first statement:
> > > > > >> > > > > > > > > >> >>
> > > > > >> > > > > > > > > >> >>Well ... I found out that you need to set
> >the
> > > > >SSDIR
> > > > > >>env
> > > > > >> > >var
> > > > > >> > > > >to
> > > > > >> > > > > > >the
> > > > > >> > > > > > > > > >> >>srcsafe.ini you want to open.   Here's
> >what I
> > > > >found
> > > > > >>in
> > > > > >> > > >VSS's
> > > > > >> > > > > > >help:
> > > > > >> > > > > > > > > >> >>
> > > > > >> > > > > > > > > >> >>"Setting the SSDIR environment variable
> >tells
> > > >VSS
> > > > > >>where
> > > > > >> > >to
> > > > > >> > > > >find
> > > > > >> > > > > > >the
> > > > > >> > > > > > > > > >> >>SRCSAFE.INI file for the VSS server
> > >installation
> > > > >to
> > > > > >> >which
> > > > > >> > > >you
> > > > > >> > > > > > >want
> > > > > >> > > > > > > >to
> > > > > >> > > > > > > > > >> >>connect.  Do this by typing the following
> >at
> > >the
> > > > > >>MS-DOS
> > > > > >> > > > >prompt:
> > > > > >> > > > > > > > > >> >
> > > > > >> > > > > > > > > >> >
> > > > > >> > > > > > > > > >> >>set ssdir=\\server\share\vss
> > > > > >> > > > > > > > > >> >>
> > > > > >> > > > > > > > > >> >>Where \\server\share\vss is the folder
> >where
> > >the
> > > > > >> > > >srcsafe.ini
> > > > > >> > > > > >file
> > > > > >> > > > > > > >is
> > > > > >> > > > > > > > > >> >>located."
> > > > > >> > > > > > > > > >> >
> > > > > >> > > > > > > > > >> >I am a little confused here. When I go to
> > > > >file->open
> > > > > >> > > > >SourceSafe
> > > > > >> > > > > > > > > >>database,
> > > > > >> > > > > > > > > >> >in the windows that is open, the name of
> >the
> > > > >database
> > > > > >>is
> > > > > >> > > >shown
> > > > > >> > > > > > >Asset
> > > > > >> > > > > > > > > >> >Planner
> > > > > >> > > > > > > > > >> >2 and its path is shown
> > > > > >>\\Cds-main\VssDb\AssetPlannerII.
> > > > > >> > > > > > > > > >> >And i have srcsafe.ini file in both
> > > > > >> > > > > > > > > >>"\\Cds-main\VssDb\AssetPlannerII-Conf"
> > > > > >> > > > > > > > > >> >and "\\Cds-main\VssDb\AssetPlannerII". But
> > > >neither
> > > > >if
> > > > > >> >them
> > > > > >> > > > >have
> > > > > >> > > > > > > >worked
> > > > > >> > > > > > > > > >>???
> > > > > >> > > > > > > > > >> >error message
> > > > > >> > > > > > > > > >> >
> > > > > >> > > > > > > > > >> >D:\ap2\javasrc\server>ant getcode
> > > > > >> > > > > > > > > >> >Buildfile: build.xml
> > > > > >> > > > > > > > > >> >
> > > > > >> > > > > > > > > >> >getcode:
> > > > > >> > > > > > > > > >> >
> > > > > >> > > > > > > > > >> >BUILD FAILED
> > > > > >> > > > > > > > > >> >
> > > > > >> > > > > > > > > >> >D:\ap2\javasrc\server\build.xml:67:
> > > > > >>java.io.IOException:
> > > > > >> > > > > > > > >CreateProcess:
> > > > > >> > > > > > > > > >> >\\Cds-main\VssDb\A
> > > > > >> > > > > > > > > >> >ssetPlannerII-Conf\ss Get "$/Asset Planner
> >2"
> > > > > >>-GLD:\ap2
> > > > > >> > >-I-
> > > > > >> > > >-R
> > > > > >> > > > > >-W
> > > > > >> > > > > > > > > >> >"-Yttraub,
> > > > > >> > > > > > > > > >> >ttraub"  erro
> > > > > >> > > > > > > > > >> >r=2
> > > > > >> > > > > > > > > >> >--- Nested Exception ---
> > > > > >> > > > > > > > > >> >java.io.IOException: CreateProcess:
> > > > > >> > > > > > > > > >>\\Cds-main\VssDb\AssetPlannerII-Conf\ss
> > > > > >> > > > > > > > > >> >Get "$/Asset P
> > > > > >> > > > > > > > > >> >lanner 2" -GLD:\ap2 -I- -R -W "-Yttraub,
> > >ttraub"
> > > > > >> >error=2
> > > > > >> > > > > > > > > >> >        at
> >java.lang.Win32Process.create(Native
> > > > > >>Method)
> > > > > >> > > > > > > > > >> >        at
> > > > > >> > > >java.lang.Win32Process.<init>(Win32Process.java:64)
> > > > > >> > > > > > > > > >> >        at
> > >java.lang.Runtime.execInternal(Native
> > > > > >>Method)
> > > > > >> > > > > > > > > >> >        at
> > > >java.lang.Runtime.exec(Runtime.java:272)
> > > > > >> > > > > > > > > >> >        at
> > > > > >> > > > > > > > > >>
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > >
> > > > > >> > > > > > >
> > > > > >> > > > > >
> > > > > >> > > > >
> > > > > >> > > >
> > > > > >> > >
> > > > > >> >
> > > > > >>
> > > > >
> > > >
> > >
> > >org.apache.tools.ant.taskdefs.Execute$CommandLauncher.exec(Execute.java
> >:435
> > > > > >> > > > > > > > > >>)
> > > > > >> > > > > > > > > >> >        at
> > > > > >> > > > > > > > > >>
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > >
> > > > > >> > > > > > >
> > > > > >> > > > > >
> > > > > >> > > > >
> > > > > >> > > >
> > > > > >> > >
> > > > > >> >
> > > > > >>
> > > > >
> > > >
> > >
> > >org.apache.tools.ant.taskdefs.Execute$CommandLauncherProxy.exec(Execute
> >.jav
> > > > > >> > > > > > > > > >>a:55
> > > > > >> > > > > > > > > >> >0)
> > > > > >> > > > > > > > > >> >        at
> > > > > >> > > > > > > > > >>
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > >
> > > > > >> > > > > > >
> > > > > >> > > > > >
> > > > > >> > > > >
> > > > > >> > > >
> > > > > >> > >
> > > > > >> >
> > > > > >>
> > > > >
> > > >
> > >
> > >org.apache.tools.ant.taskdefs.Execute$WinNTCommandLauncher.exec(Execute
> >.jav
> > > > > >> > > > > > > > > >>a:57
> > > > > >> > > > > > > > > >> >5)
> > > > > >> > > > > > > > > >> >        at
> > > > > >> > > > > > > > >
> > > > > >> > > >
> > > > >>org.apache.tools.ant.taskdefs.Execute.execute(Execute.java:329)
> > > > > >> > > > > > > > > >> >        at
> > > > > >> > > > > > > > > >>
> > > > > >> > > > > > >
> > > > > >> > > >
> > > > > >>
> > > >org.apache.tools.ant.taskdefs.optional.vss.MSVSS.run(MSVSS.java:160)
> > > > > >> > > > > > > > > >> >        at
> > > > > >> > > > > > > > > >>
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > >
> > > > > >> > > > > > >
> > > > > >> > > > > >
> > > > > >> > > > >
> > > > > >> > > >
> > > > > >> > >
> > > > > >> >
> > > > > >>
> > > > >
> > > >
> > >
> > >org.apache.tools.ant.taskdefs.optional.vss.MSVSSGET.execute(MSVSSGET.ja
> >va:1
> > > > > >> > > > > > > > > >>68)
> > > > > >> > > > > > > > > >> >        at
> > > > > >> > >org.apache.tools.ant.Target.execute(Target.java,
> > > > > >> > > > > > >Compiled
> > > > > >> > > > > > > > > >>Code)
> > > > > >> > > > > > > > > >> >        at
> > > > > >> > > > > >
> > >org.apache.tools.ant.Project.runTarget(Project.java:898)
> > > > > >> > > > > > > > > >> >        at
> > > > > >> > > > > >
> > >org.apache.tools.ant.Project.executeTarget(Project.java,
> > > > > >> > > > > > > > > >> >Compiled
> > > > > >> > > > > > > > > >> >Code)
> > > > > >> > > > > > > > > >> >        at
> > > > > >> > > > > >
> > > >org.apache.tools.ant.Project.executeTargets(Project.java,
> > > > > >> > > > > > > > > >> >Compiled Code)
> > > > > >> > > > > > > > > >> >        at
> > > > > >>org.apache.tools.ant.Main.runBuild(Main.java,
> > > > > >> > > > > >Compiled
> > > > > >> > > > > > > > >Code)
> > > > > >> > > > > > > > > >> >        at
> > > > > >>org.apache.tools.ant.Main.main(Main.java:149)
> > > > > >> > > > > > > > > >> >
> > > > > >> > > > > > > > > >> >Total time: 6 seconds
> > > > > >> > > > > > > > > >> >
> > > > > >> > > > > > > > > >> >I remember getting this message before but
> >i
> > > >can't
> > > > > >> > >remember
> > > > > >> > > > >what
> > > > > >> > > > >
> > > > > >> > > > > >i
> > > > > >> > > > > > > >did
> > > > > >> > > > > > > > > >>to
> > > > > >> > > > > > > > > >> >get rid of it :(
> > > > > >> > > > > > > > > >> >
> > > > > >> > > > > > > > > >> >>As far as my second:
> > > > > >> > > > > > > > > >> >>
> > > > > >> > > > > > > > > >> >>What I meant was to open a command-line
> >window
> > > > >and,
> > > > > >> > > >assuming
> > > > > >> > > > > >you
> > > > > >> > > > > > > >have
> > > > > >> > > > > > > > > >> >>ss.exe
> > > > > >> > > > > > > > > >> >>in your path, extract the source code
> >running
> > >ss
> > > > > >>get.
> > > > > >> > >You
> > > > > >> > > > >can
> > > > > >> > > > > > >see
> > > > > >> > > > > > > > > >>VSS's
> > > > > >> > > > > > > > > >> >>help for running ss get.   What I was
> >trying
> > >to
> > > > >get
> > > > > >>at
> > > > > >> > >here
> > > > > >> > > > >was
> > > > > >> > > > > > >to
> > > > > >> > > > > > > > >not
> > > > > >> > > > > > > > > >>run
> > > > > >> > > > > > > > > >> >>ant's vssget but just plain ss get to
> >extract
> > > > >source
> > > > > >> > >code.
> > > > > >> > > > > > > > > >> >
> > > > > >> > > > > > > > > >> >I have ss.exe in d:\Program
> > > > > >> > > > > >Files\MicrosoftVisualStudio\VSS\win32
> > > > > >> > > > > > > > > >> >
> > > > > >> > > > > > > > > >> >I think it's working right. when I perform
> >ss
> > >get
> > > > > >>from
> > > > > >> >the
> > > > > >> > > > > >command
> > > > > >> > > > > > > > >line
> > > > > >> > > > > > > > > >>it
> > > > > >> > > > > > > > > >> >asks for username and pasword, but it
> >couldn;
> > > >tfind
> > > > > >>my
> > > > > >> > > > >username
> > > > > >> > > > > > >and
> > > > > >> > > > > > > > > >> >password
> > > > > >> > > > > > > > > >> >i think it's been changed recently :)
> > > > > >> > > > > > > > > >> >
> > > > > >> > > > > > > > > >> >>
> > > > > >> > > > > > > > > >> >>HTH,
> > > > > >> > > > > > > > > >> >>Felice
> > > > > >> > > > > > > > > >> >>
> > > > > >> > > > > > > > > >> >>
> > > > > >> > > > > > > > > >> >>
> > > > > >> > > > > > > > > >> >>-----Original Message-----
> > > > > >> > > > > > > > > >> >>From: Pinar Bicioglu
> > > > >[mailto:pinarbici@hotmail.com]
> > > > > >> > > > > > > > > >> >>Sent: Tuesday, June 05, 2001 2:56 PM
> > > > > >> > > > > > > > > >> >>To: ant-user@jakarta.apache.org
> > > > > >> > > > > > > > > >> >>Subject: RE: doing SourceSafe get
> > > > > >> > > > > > > > > >> >>
> > > > > >> > > > > > > > > >> >>
> > > > > >> > > > > > > > > >> >>
> > > > > >> > > > > > > > > >> >>
> > > > > >> > > > > > > > > >> >>
> > > > > >> > > > > > > > > >> >> >From: "Vittoria, Felice"
> > > > ><Felice_Vittoria@bmc.com>
> > > > > >> > > > > > > > > >> >> >Reply-To: ant-user@jakarta.apache.org
> > > > > >> > > > > > > > > >> >> >To: "'ant-user@jakarta.apache.org'"
> > > > > >> > > > > > ><ant-user@jakarta.apache.org>
> > > > > >> > > > > > > > > >> >> >Subject: RE: doing SourceSafe get
> > > > > >> > > > > > > > > >> >> >Date: Tue, 5 Jun 2001 14:44:13 -0500
> > > > > >> > > > > > > > > >> >> >
> > > > > >> > > > > > > > > >> >> >Hmm .. I guess what I meant was the
> >database
> > > >on
> > > > >a
> > > > > >> > > >different
> > > > > >> > > > > > > >server?
> > > > > >> > > > > > > > > >>If
> > > > > >> > > > > > > > > >> >> >it's
> > > > > >> > > > > > > > > >> >> >on a different server then you may need
> >to
> > > >make
> > > > > >> > > >additional
> > > > > >> > > > > > > > > >>configuration
> > > > > >> > > > > > > > > >> >> >changes to your PC before running ant.
> > > > > >> > > > > > > > > >> >>
> > > > > >> > > > > > > > > >> >>Oh I am sorry about that. yes you're right
> >it
> > >is
> > > > >on
> > > > > >>a
> > > > > >> > > > >different
> > > > > >> > > > > > > > >server!
> > > > > >> > > > > > > > > >> >>What kind of configurations do i need to
> >make.
> > > >Is
> > > > > >>there
> > > > > >> > >any
> > > > > >> > > > > > > > > >>documentation
> > > > > >> > > > > > > > > >> >>on
> > > > > >> > > > > > > > > >> >>
> > > > > >> > > > > > > > > >> >>that that i can use ??
> > > > > >> > > > > > > > > >> >> >
> > > > > >> > > > > > > > > >> >> >Also, if you perform the ss get command
> >from
> > > >the
> > > > > >> > > > > >command-line,
> > > > > >> > > > > > > >will
> > > > > >> > > > > > > > > >>it
> > > > > >> > > > > > > > > >> >> >produce the same error as ant or will it
> >
> > >work
> > > > > >> > >correctly?
> > > > > >> > > > > > > > > >> >>
> > > > > >> > > > > > > > > >> >>I don't think that I understand what you
> >mean.
> > > >the
> > > > > >> >error
> > > > > >> > > > > >message
> > > > > >> > > > > > > > > >>Iposted
> > > > > >> > > > > > > > > >> >>in
> > > > > >> > > > > > > > > >> >>my earlier message gets generated when I
> >write
> > > > >"ant
> > > > > >> > > >getcode"
> > > > > >> > > > >in
> > > > > >> > > > >
> > > > > >> > > > > >a
> > > > > >> > > > > > > > > >>command
> > > > > >> > > > > > > > > >> >>line.
> > > > > >> > > > > > > > > >> >>
> > > > > >> > > > > > > > > >> >> >
> > > > > >> > > > > > > > > >> >> >-----Original Message-----
> > > > > >> > > > > > > > > >> >> >From: Pinar Bicioglu
> > > > > >>[mailto:pinarbici@hotmail.com]
> > > > > >> > > > > > > > > >> >> >Sent: Tuesday, June 05, 2001 2:39 PM
> > > > > >> > > > > > > > > >> >> >To: ant-user@jakarta.apache.org
> > > > > >> > > > > > > > > >> >> >Subject: RE: doing SourceSafe get
> > > > > >> > > > > > > > > >> >> >
> > > > > >> > > > > > > > > >> >> >
> > > > > >> > > > > > > > > >> >> >
> > > > > >> > > > > > > > > >> >> >It is actually both. It is different
> > >database
> > > > >and
> > > > > >> > > >differen
> > > > > >> > > > > > > >project.
> > > > > >> > > > > > > > > >> >> >
> > > > > >> > > > > > > > > >> >> >the database was APJUL2000 and the
> >project's
> > > > >name
> > > > > >>was
> > > > > >> > > > > > > > >$/AP2.0{struts}
> > > > > >> > > > > > > > > >> >> >before
> > > > > >> > > > > > > > > >> >> >
> > > > > >> > > > > > > > > >> >> >with the code below.
> > > > > >> > > > > > > > > >> >> >
> > > > > >> > > > > > > > > >> >> ><target name="getcode">
> > > > > >> > > > > > > > > >> >> >       <vssget vsspath="$/AP2.0(struts)"
> > > > > >> > > > > > > > > >> >> >          login="ttraub, ttraub"
> > > > > >> > > > > > > > > >> >> >          writable="true"
> > > > > >> > > > > > > > > >> >> >          localpath="D:/ap20"
> > > > > >> > > > > > > > > >> >> >          recursive="true"
> > > > > >> > > > > > > > > >> >> >          ssdir="D:/Program
> >Files/Microsoft
> > > > >Visual
> > > > > >> > > > > > > > >Studio/VSS/win32"
> > > > > >> > > > > > > > > >>/>
> > > > > >> > > > > > > > > >> >> >   </target>
> > > > > >> > > > > > > > > >> >> >
> > > > > >> > > > > > > > > >> >> >Now the database is Asset Planner 2 and
> >the
> > > > > >>project's
> > > > > >> > > >name
> > > > > >> > > > >is
> > > > > >> > > > > > >the
> > > > > >> > > > > > > > > >>same
> > > > > >> > > > > > > > > >> >> >which
> > > > > >> > > > > > > > > >> >> >
> > > > > >> > > > > > > > > >> >> >is $/Asset Planner 2 with the following
> > >code.
> > > > > >> > > > > > > > > >> >> >
> > > > > >> > > > > > > > > >> >> ><target name="getcode">
> > > > > >> > > > > > > > > >> >> >       <vssget vsspath="$/Asset Planner
> >2"
> > > > > >> > > > > > > > > >> >> >          login="ttraub, ttraub"
> > > > > >> > > > > > > > > >> >> >          writable="true"
> > > > > >> > > > > > > > > >> >> >          localpath="D:/ap2"
> > > > > >> > > > > > > > > >> >> >          recursive="true"
> > > > > >> > > > > > > > > >> >> >          ssdir="D:/Program
> >Files/Microsoft
> > > > >Visual
> > > > > >> > > > > > > > >Studio/VSS/win32"
> > > > > >> > > > > > > > > >>/>
> > > > > >> > > > > > > > > >> >> >   </target>
> > > > > >> > > > > > > > > >> >> >
> > > > > >> > > > > > > > > >> >> >
> > > > > >> > > > > > > > > >> >> >
> > > > > >> > > > > > > > > >> >> > >From: "Vittoria, Felice"
> > > > > >><Felice_Vittoria@bmc.com>
> > > > > >> > > > > > > > > >> >> > >Reply-To: ant-user@jakarta.apache.org
> > > > > >> > > > > > > > > >> >> > >To: "'ant-user@jakarta.apache.org'"
> > > > > >> > > > > > > ><ant-user@jakarta.apache.org>
> > > > > >> > > > > > > > > >> >> > >Subject: RE: doing  SourceSafe get
> > > > > >> > > > > > > > > >> >> > >Date: Tue, 5 Jun 2001 14:15:18 -0500
> > > > > >> > > > > > > > > >> >> > >
> > > > > >> > > > > > > > > >> >> > >Are you getting the code from a
> >different
> > > > > >>database
> > > > > >> >or
> > > > > >> >
> > > > > >> > >a
> > > > > >> > > > > > > >"project"
> > > > > >> > > > > > > > > >> >>within
> > > > > >> > > > > > > > > >> >> > >that database?   Also, what values did
> >you
> > > > > >>change?
> > > > > >> > > > > > > > > >> >> > >
> > > > > >> > > > > > > > > >> >> > >-----Original Message-----
> > > > > >> > > > > > > > > >> >> > >From: Pinar Bicioglu
> > > > > >>[mailto:pinarbici@hotmail.com]
> > > > > >> > > > > > > > > >> >> > >Sent: Tuesday, June 05, 2001 2:06 PM
> > > > > >> > > > > > > > > >> >> > >To: ant-user@jakarta.apache.org
> > > > > >> > > > > > > > > >> >> > >Subject: doing SourceSafe get
> > > > > >> > > > > > > > > >> >> > >
> > > > > >> > > > > > > > > >> >> > >
> > > > > >> > > > > > > > > >> >> > >I worked with "vssget" task before and
> >it
> > > >was
> > > > > >> > >working.
> > > > > >> > > > >this
> > > > > >> > > > > > > >time
> > > > > >> > > > > > > > >I
> > > > > >> > > > > > > > > >>had
> > > > > >> > > > > > > > > >> >>to
> > > > > >> > > > > > > > > >> >> > >get the code from a different
> >database.
> > >And
> > > > > >>somehow
> > > > > >> > > >it's
> > > > > >> > > > > >not
> > > > > >> > > > > > > > > >>working.
> > > > > >> > > > > > > > > >> >>I
> > > > > >> > > > > > > > > >> >> > >don't understand what makes the
> > >difference.
> > > > > >> > > > > > > > > >> >> > >I have the code as below
> > > > > >> > > > > > > > > >> >> > >
> > > > > >> > > > > > > > > >> >> > ><target name="getcode">
> > > > > >> > > > > > > > > >> >> > >       <vssget vsspath="$/Asset
> >Planner 2"
> > > > > >> > > > > > > > > >> >> > >          login="pinarb, pinarb"
> > > > > >> > > > > > > > > >> >> > >          writable="true"
> > > > > >> > > > > > > > > >> >> > >          localpath="D:/ap2"
> > > > > >> > > > > > > > > >> >> > >          recursive="true"
> > > > > >> > > > > > > > > >> >> > >          ssdir="D:/Program
> > >Files/Microsoft
> > > > > >>Visual
> > > > > >> > > > > > > > > >>Studio/VSS/win32"
> > > > > >> > > > > > > > > >> >>/>
> > > > > >> > > > > > > > > >> >> > >   </target>
> > > > > >> > > > > > > > > >> >> > >
> > > > > >> > > > > > > > > >> >> > >it generates an error message like
> >this...
> > > > > >> > > > > > > > > >> >> > >
> > > > > >> > > > > > > > > >> >> > >D:\ap2\javasrc\server>ant getcode
> > > > > >> > > > > > > > > >> >> > >Buildfile: build.xml
> > > > > >> > > > > > > > > >> >> > >
> > > > > >> > > > > > > > > >> >> > >getcode:
> > > > > >> > > > > > > > > >> >> > >    [vssget] $/Asset Planner 2 is not
> >an
> > > > > >>existing
> > > > > >> > > > >filename
> > > > > >> > > > > >or
> > > > > >> > > > > > > > > >>project
> > > > > >> > > > > > > > > >> >> > >
> > > > > >> > > > > > > > > >> >> > >BUILD FAILED
> > > > > >> > > > > > > > > >> >> > >
> > > > > >> > > > > > > > > >> >> > >D:\ap2\javasrc\server\build.xml:66:
> >Failed
> > > > > >> >executing:
> > > > > >> > > > > > > >"D:\Program
> > > > > >> > > > > > > > > >> >> > >Files\Microsoft Visual S
> > > > > >> > > > > > > > > >> >> > >tudio\VSS\win32\ss" Get "$/Asset
> >Planner
> > >2"
> > > > > >> >-GLD:\ap2
> > > > > >> > > >-I-
> > > > > >> > > > > >-R
> > > > > >> > > > > > >-W
> > > > > >> > > > > > > > > >> >> >"-Yttraub,
> > > > > >> > > > > > > > > >> >> > >ttraub"
> > > > > >> > > > > > > > > >> >> > >
> > > > > >> > > > > > > > > >> >> > >Total time: 3 seconds
> > > > > >> > > > > > > > > >> >> > >
> > > > > >> > > > > > > > > >> >> > >is it about changin the mode of the
> >file.
> > > > > >>Actually
> > > > > >> >I
> > > > > >> > > >even
> > > > > >> > > > > > >tried
> > > > > >> > > > > > > > > >>this
> > > > > >> > > > > > > > > >> >>but
> > > > > >> > > > > > > > > >> >> >it
> > > > > >> > > > > > > > > >> >> > >didn't work
> > > > > >> > > > > > > > > >> >> >
> > > > > >> > > > > > > >
> > > > > >> > >
> > > > >_________________________________________________________________
> > > > > >> > > > > > > > > >> >> > >Get your FREE download of MSN Explorer
> >at
> > > > > >> > > > > > > >http://explorer.msn.com
> > > > > >> > > > > > > > > >> >> >
> > > > > >> > > > > > > > > >> >>
> > > > > >> > > > > > >
> > > > > >> >
> > > >_________________________________________________________________
> > > > > >> > > > > > > > > >> >> >Get your FREE download of MSN Explorer
> >at
> > > > > >> > > > > > >http://explorer.msn.com
> > > > > >> > > > > > > > > >> >>
> > > > > >> > > > > > > > > >>
> > > > > >> > > > > >
> > > > > >> >
> > > >>_________________________________________________________________
> > > > > >> > > > > > > > > >> >>Get your FREE download of MSN Explorer at
> > > > > >> > > > > >http://explorer.msn.com
> > > > > >> > > > > > > > > >> >
> > > > > >> > > > > > > > > >>
> > > > > >> > > > > >
> > > > > >>
> > >_________________________________________________________________
> > > > > >> > > > > > > > > >> >Get your FREE download of MSN Explorer at
> > > > > >> > > > > >http://explorer.msn.com
> > > > > >> > > > > > > > > >> >
> > > > > >> > > > > > > > > >>
> > > > > >> > > > > > > > >
> > > > > >> > > > >
> > > > > >>
> > >>_________________________________________________________________
> > > > > >> > > > > > > > > >>Get your FREE download of MSN Explorer at
> > > > > >> > > > >http://explorer.msn.com
> > > > > >> > > > > > > > > >
> > > > > >> > > > > > > > >
> > > > > >> > > >
> > > > > >_________________________________________________________________
> > > > > >> > > > > > > > > >Get your FREE download of MSN Explorer at
> > > > > >> > > >http://explorer.msn.com
> > > > > >> > > > > > > > > >
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > >
> > > > > >> > >
> > > > >_________________________________________________________________
> > > > > >> > > > > > > > >Get your FREE download of MSN Explorer at
> > > > > >> > >http://explorer.msn.com
> > > > > >> > > > > > > >
> > > > > >> > > > > > >
> > > > > >> >
> > > >_________________________________________________________________
> > > > > >> > > > > > > >Get your FREE download of MSN Explorer at
> > > > > >> >http://explorer.msn.com
> > > > > >> > > > > > >
> > > > > >> > > > > >
> > > > > >>
> > >_________________________________________________________________
> > > > > >> > > > > > >Get your FREE download of MSN Explorer at
> > > > > >>http://explorer.msn.com
> > > > > >> > > > > >
> > > > > >> > > > >
> > > > > >>
> > >_________________________________________________________________
> > > > > >> > > > > >Get your FREE download of MSN Explorer at
> > > > > >>http://explorer.msn.com
> > > > > >> > > > >
> > > > > >> > > >
> > > > > >_________________________________________________________________
> > > > > >> > > > >Get your FREE download of MSN Explorer at
> > > > >http://explorer.msn.com
> > > > > >> > > >
> > > > > >> > >
> > > > >_________________________________________________________________
> > > > > >> > > >Get your FREE download of MSN Explorer at
> > > >http://explorer.msn.com
> > > > > >> > >
> > > > > >> >
> > > >_________________________________________________________________
> > > > > >> > >Get your FREE download of MSN Explorer at
> > >http://explorer.msn.com
> > > > > >> >
> > > > > >>
> > >_________________________________________________________________
> > > > > >> >Get your FREE download of MSN Explorer at
> >http://explorer.msn.com
> > > > > >>
> > > > >
> > >>_________________________________________________________________
> > > > > >>Get your FREE download of MSN Explorer at
> >http://explorer.msn.com
> > > > > >
> > > > > >_________________________________________________________________
> > > > > >Get your FREE download of MSN Explorer at http://explorer.msn.com
> > > > > >
> > > > >
> > > > >_________________________________________________________________
> > > > >Get your FREE download of MSN Explorer at http://explorer.msn.com
> > > >
> > > >_________________________________________________________________
> > > >Get your FREE download of MSN Explorer at http://explorer.msn.com
> > >
> > >_________________________________________________________________
> > >Get your FREE download of MSN Explorer at http://explorer.msn.com
> >
> >_________________________________________________________________
> >Get your FREE download of MSN Explorer at http://explorer.msn.com
>
>_________________________________________________________________
>Get your FREE download of MSN Explorer at http://explorer.msn.com

_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com


Mime
View raw message