Hmm...I don't know why it was saying 18 before.  I built all and now it says 30, so those must have been files I'd touched or something, but now it says 30 every time (there *are* 30 .java files in src/, though).  Now it says, "compiling 30 src files to the dir" and completes it in 0 seconds, which would be amazing, except the files are compiled at all.  What do you mean "running it -debug"?  "build -debug" = "Unknown arg".  Putting -debug in the scrip after "Main" = the same thing.  "debug=on" in my <compile> target.  Also, running it -verbose doesn't tell me anything about these 30 files that are supposedly being compiled.

jeb.

> -----Original Message-----
> From: Diane Holt [mailto:holtdl@yahoo.com]
> Sent: Tuesday, January 09, 2001 3:00 PM
> To: ant-user@jakarta.apache.org
> Subject: RE: ant and I have a failure to communicate (on compile
> targets/j avac tasks)
>
>
> Where are the 18 source-files it says it -is- compiling located? Also,
> have you tried running it -debug to see what <javac> has to
> say about any
> of the .java files it does find?
>
> Diane
>
> --- "Boniakowski,Jeb" <JBoniakowski@nntllc.com> wrote:
> > I created a "src/foo/Foo.java" in addition to my "src/Foo.java".
> > Neither of
> > them is attempted to be compiled.  My basedir was
> previously "." and I
> > was
> > executing ant in the dir above src.  That's when I emailed the list.
> > However, I've tried hardcoding in both my basedir for the project
> > ("/home/jeb/projects/ordermgmt") and the srcdir for the
> compile target
> > ("/home/jeb/projects/ordermgmt/src") and neither changes anything.
> >
> > with those set as above, here is some output from my shell:
> >
> > $ ls src/foo/
> > Foo.java
> > $ less src/foo/Foo.java
> > public class Foo{
> >         this should break the compiler
> > }
> > $ build
> > Buildfile: build.xml
> > Project base dir set to: C:\home\jeb\projects\ordermgmt
> > Executing Target: prepare
> > Executing Target: compile
> > Compiling 18 source files to
> > \jdk1.3\jakarta-tomcat\webapps\nnt\WEB-INF\classes
> > Performing a Modern Compile
> > Completed in 1 seconds
> >
> >
> > If I go into build.xml and change srcdir in the compile target to be
> > nonsense, ant exits with a "dir does not exist!" error, so
> it's finding
> > the
> > directory, it's just not taking a shot at the .java files contained
> > therein.
> >
> > jeb.
> >
> >
> > > -----Original Message-----
> > > From: Diane Holt [mailto:holtdl@yahoo.com]
> > > Sent: Tuesday, January 09, 2001 1:00 PM
> > > To: ant-user@jakarta.apache.org
> > > Subject: Re: ant and I have a failure to communicate (on compile
> > > targets/javac tasks)
> > >
> > >
> > > Jeb,
> > >
> > > I just tested this, and it worked fine for me (although I did
> > > change a few
> > > things in the target, to make it match my dirs/classpath):
> > >   <target name="compile">
> > >     <javac srcdir="src" destdir="${out.dir}"
> > >            classpath="${compile.classpath}"
> > >            debug="on" optimize="off" deprecation="off"/>
> > >   </target>
> > > I created "src/foo" under my basedir, then put your Foo.java
> > > in src/foo,
> > > ran 'ant', and it resulted in:
> > > Buildfile: test.xml
> > > Target: compile
> > >     [javac] Compiling 1 source file to D:\dianeh\src\main\classes
> > >     [javac] D:\dianeh\src\main\src\foo\Foo.java(1): Type expected
> > >     [javac] 1 error(s), 0 warning(s)
> > >
> > > BUILD FAILED
> > > test.xml:200: Compile failed, messages should have been provided.
> > > Total time: 1 second
> > >
> > > Are you sure that the "src" dir that's relative to your
> > > "basedir" is the
> > > one that contains your java source? If there aren't any .java
> > > files in the
> > > srcdir pointed to, <javac> won't complain about not finding
> > > any. You might
> > > want to try explicitly <include>'ing Foo.java and see what
> > > happens that
> > > way.
> > >
> > > Diane
> > >
> > > --- "Boniakowski,Jeb" <JBoniakowski@nntllc.com> wrote:
> > > > Hi.  Sorry for this admittedly annoying type of question,
> > > but I can't
> > > > figure
> > > > out the answer, after reading everything else I could find.
> > > >
> > > > I'm using basically the included build.xml.  Here's the
> > > compile target:
> > > >
> > > >   <target name="compile" depends="prepare">
> > > >     <javac srcdir="src" destdir="${deploy.home}/WEB-INF/classes"
> > > >            classpath="${deploy.home}/WEB-INF/classes"
> > > >            debug="on" optimize="off" deprecation="off"/>
> > > >   </target>
> > > >
> > > > Haven't changed it all.  All of my directories are set up
> > > as suggested
> > > > by
> > > > the docs.
> > > >
> > > > The comment in build.xml says that the "javac" task should
> > > recurse down
> > > > the
> > > > dir tree compiling classes that don't exist or are
> newer than their
> > > > .class
> > > > files.  Well, mine doesn't even go down one level.  If I
> > > put a file in
> > > > src
> > > > that looks like this:
> > > >
> > > > Foo.java:
> > > >         public class Foo{ break compiler }
> > > >
> > > > Ant marches on ahead without complaint.  There is no
> Foo.class in my
> > > > {deploy.home}/WEB-INF/classes directory.  It copies
> > > non-.java files from
> > > > my
> > > > src/ dir fine.  If I do "build clean", my webapps/nnt (name
> > > of my app)
> > > > is
> > > > deleted.  If I do build all, it is deleted and then all of
> > > the classes
> > > > are
> > > > copied back to the same place and work fine and all, but
> > > only if I go
> > > > through the src/ try and manually compile them first.
> > > >
> > > > Does anyone have any idea what I am missing here?
> > > >
> > > > jeb.
> > > >
> > >
> > >
> > > =====
> > > (holtdl@yahoo.com)
> > >
> > >
> > >
> > > __________________________________________________
> > > Do You Yahoo!?
> > > Yahoo! Photos - Share your holiday photos online!
> > > http://photos.yahoo.com/
> > >
> >
>
>
> =====
> (holtdl@yahoo.com)
>
>
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Photos - Share your holiday photos online!
> http://photos.yahoo.com/
>