ambari-commits mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From dmitriu...@apache.org
Subject [15/94] ambari git commit: AMBARI-17112. Fixed implementation of on-ambari-upgrade support. Update all stack configuration xmls to pass validation (dlysnichenko)
Date Thu, 09 Jun 2016 14:19:35 GMT
http://git-wip-us.apache.org/repos/asf/ambari/blob/a998371a/ambari-server/src/test/resources/bad-stacks/HDP/0.1/services/MAPREDUCE/configuration/mapred-site.xml
----------------------------------------------------------------------
diff --git a/ambari-server/src/test/resources/bad-stacks/HDP/0.1/services/MAPREDUCE/configuration/mapred-site.xml b/ambari-server/src/test/resources/bad-stacks/HDP/0.1/services/MAPREDUCE/configuration/mapred-site.xml
index ea3d6b6..8a4f566 100644
--- a/ambari-server/src/test/resources/bad-stacks/HDP/0.1/services/MAPREDUCE/configuration/mapred-site.xml
+++ b/ambari-server/src/test/resources/bad-stacks/HDP/0.1/services/MAPREDUCE/configuration/mapred-site.xml
@@ -28,32 +28,28 @@
       of directories then the name table is replicated in all of the
       directories, for redundancy. </description>
     <final>true</final>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.support.append</name>
     <value>true</value>
     <description>to enable dfs append</description>
     <final>true</final>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.webhdfs.enabled</name>
     <value>false</value>
     <description>to enable webhdfs</description>
     <final>true</final>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.datanode.failed.volumes.tolerated</name>
     <value>0</value>
     <description>#of failed disks dn would tolerate</description>
     <final>true</final>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.block.local-path-access.user</name>
@@ -62,8 +58,7 @@
     circuit reads.
     </description>
     <final>true</final>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.data.dir</name>
@@ -75,8 +70,7 @@
   Directories that do not exist are ignored.
   </description>
     <final>true</final>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.hosts.exclude</name>
@@ -85,8 +79,7 @@
     not permitted to connect to the namenode.  The full pathname of the
     file must be specified.  If the value is empty, no hosts are
     excluded.</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.hosts</name>
@@ -95,31 +88,27 @@
     permitted to connect to the namenode. The full pathname of the file
     must be specified.  If the value is empty, all hosts are
     permitted.</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.replication.max</name>
     <value>50</value>
     <description>Maximal block replication.
   </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.replication</name>
     <value>3</value>
     <description>Default block replication.
   </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.heartbeat.interval</name>
     <value>3</value>
     <description>Determines datanode heartbeat interval in seconds.</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.safemode.threshold.pct</name>
@@ -130,8 +119,7 @@
         Values less than or equal to 0 mean not to start in safe mode.
         Values greater than 1 will make safe mode permanent.
         </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.balance.bandwidthPerSec</name>
@@ -141,29 +129,25 @@
         can utilize for the balancing purpose in term of
         the number of bytes per second.
   </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.datanode.address</name>
     <value>0.0.0.0:50010</value>
     <description>Address where the datanode binds</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.datanode.http.address</name>
     <value>0.0.0.0:50075</value>
     <description>HTTP address for the datanode</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.block.size</name>
     <value>134217728</value>
     <description>The default block size for new files.</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.http.address</name>
@@ -171,8 +155,7 @@
     <description>The name of the default file system.  Either the
 literal string "local" or a host:port for HDFS.</description>
     <final>true</final>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.datanode.du.reserved</name>
@@ -180,8 +163,7 @@ literal string "local" or a host:port for HDFS.</description>
     <value>1073741824</value>
     <description>Reserved space in bytes per volume. Always leave this much space free for non dfs use.
 </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.datanode.ipc.address</name>
@@ -190,29 +172,25 @@ literal string "local" or a host:port for HDFS.</description>
 The datanode ipc server address and port.
 If the port is 0 then the server will start on a free port.
 </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.blockreport.initialDelay</name>
     <value>120</value>
     <description>Delay for first block report in seconds.</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.namenode.handler.count</name>
     <value>40</value>
     <description>The number of server threads for the namenode.</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.datanode.max.xcievers</name>
     <value>1024</value>
     <description>PRIVATE CONFIG VARIABLE</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <!-- Permissions configuration -->
   <property>
@@ -221,8 +199,7 @@ If the port is 0 then the server will start on a free port.
     <description>
 The octal umask used when creating files and directories.
 </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.web.ugi</name>
@@ -231,8 +208,7 @@ The octal umask used when creating files and directories.
     <description>The user account used by the web interface.
 Syntax: USERNAME,GROUP1,GROUP2, ...
 </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.permissions</name>
@@ -244,29 +220,25 @@ but all other behavior is unchanged.
 Switching from one parameter value to the other does not change the mode,
 owner or group of files or directories.
 </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.permissions.supergroup</name>
     <value>hdfs</value>
     <description>The name of the group of super-users.</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.namenode.handler.count</name>
     <value>100</value>
     <description>Added to grow Queue size so that more client connections are allowed</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>ipc.server.max.response.size</name>
     <value>5242880</value>
     <description>The max response size for IPC</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.block.access.token.enable</name>
@@ -275,8 +247,7 @@ owner or group of files or directories.
 If "true", access tokens are used as capabilities for accessing datanodes.
 If "false", no access tokens are checked on accessing datanodes.
 </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.namenode.kerberos.principal</name>
@@ -284,8 +255,7 @@ If "false", no access tokens are checked on accessing datanodes.
     <description>
 Kerberos principal name for the NameNode
 </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.secondary.namenode.kerberos.principal</name>
@@ -293,8 +263,7 @@ Kerberos principal name for the NameNode
     <description>
         Kerberos principal name for the secondary NameNode.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <!--
   This is KRB DOMAIN specific. The FQDN of the namenode has to be mentioned.
@@ -303,30 +272,26 @@ Kerberos principal name for the NameNode
     <name>dfs.namenode.kerberos.https.principal</name>
     <value>host/_HOST@</value>
     <description>The Kerberos principal for the host that the NameNode runs on.</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.secondary.namenode.kerberos.https.principal</name>
     <value>host/_HOST@</value>
     <description>The Kerberos principal for the hostthat the secondary NameNode runs on.</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <!-- cluster variant -->
     <name>dfs.secondary.http.address</name>
     <value>hdp2.cybervisiontech.com.ua:50090</value>
     <description>Address of secondary namenode web server</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.secondary.https.port</name>
     <value>50490</value>
     <description>The https port where secondary-namenode binds</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.web.authentication.kerberos.principal</name>
@@ -336,8 +301,7 @@ Kerberos principal name for the NameNode
       The HTTP Kerberos principal MUST start with 'HTTP/' per Kerberos
       HTTP SPENGO specification.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.web.authentication.kerberos.keytab</name>
@@ -346,8 +310,7 @@ Kerberos principal name for the NameNode
       The Kerberos keytab file with the credentials for the
       HTTP Kerberos principal used by Hadoop-Auth in the HTTP endpoint.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.datanode.kerberos.principal</name>
@@ -355,8 +318,7 @@ Kerberos principal name for the NameNode
     <description>
         The Kerberos principal that the DataNode runs as. "_HOST" is replaced by the real host name.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.namenode.keytab.file</name>
@@ -364,8 +326,7 @@ Kerberos principal name for the NameNode
     <description>
         Combined keytab file containing the namenode service and host principals.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.secondary.namenode.keytab.file</name>
@@ -373,8 +334,7 @@ Kerberos principal name for the NameNode
     <description>
         Combined keytab file containing the namenode service and host principals.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.datanode.keytab.file</name>
@@ -382,22 +342,19 @@ Kerberos principal name for the NameNode
     <description>
         The filename of the keytab file for the DataNode.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.https.port</name>
     <value>50470</value>
     <description>The https port where namenode binds</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.https.address</name>
     <value>hdp1.cybervisiontech.com.ua:50470</value>
     <description>The https address where namenode binds</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.datanode.data.dir.perm</name>
@@ -406,8 +363,7 @@ Kerberos principal name for the NameNode
 directories. The datanode will not come up if the permissions are
 different on existing dfs.data.dir directories. If the directories
 don't exist, they will be created with this permission.</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.access.time.precision</name>
@@ -416,21 +372,18 @@ don't exist, they will be created with this permission.</description>
                The default value is 1 hour. Setting a value of 0 disables
                access times for HDFS.
   </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.cluster.administrators</name>
     <value> hdfs</value>
     <description>ACL for who all can view the default servlets in the HDFS</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>ipc.server.read.threadpool.size</name>
     <value>5</value>
     <description>IPC thread size</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
 </configuration>

http://git-wip-us.apache.org/repos/asf/ambari/blob/a998371a/ambari-server/src/test/resources/bad-stacks/HDP/0.1/services/YARN/configuration/capacity-scheduler.xml
----------------------------------------------------------------------
diff --git a/ambari-server/src/test/resources/bad-stacks/HDP/0.1/services/YARN/configuration/capacity-scheduler.xml b/ambari-server/src/test/resources/bad-stacks/HDP/0.1/services/YARN/configuration/capacity-scheduler.xml
index d56e78d..4fe7e0a 100644
--- a/ambari-server/src/test/resources/bad-stacks/HDP/0.1/services/YARN/configuration/capacity-scheduler.xml
+++ b/ambari-server/src/test/resources/bad-stacks/HDP/0.1/services/YARN/configuration/capacity-scheduler.xml
@@ -21,8 +21,7 @@
     <value>10000</value>
     <description>Maximum number of applications that can be pending and running.</description>
     <final>true</final>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>yarn.scheduler.capacity.maximum-am-resource-percent</name>
@@ -30,15 +29,13 @@
     <deleted>true</deleted>
     <description>Maximum percent of resources in the cluster.</description>
     <final>false</final>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property require-input="true">
     <name>yarn.scheduler.capacity.root.queues</name>
     <value>default</value>
     <deleted>false</deleted>
     <description>The queues at the this level (root is the root queue).</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
 </configuration>

http://git-wip-us.apache.org/repos/asf/ambari/blob/a998371a/ambari-server/src/test/resources/bad-stacks/HDP/0.1/services/YARN/configuration/yarn-site.xml
----------------------------------------------------------------------
diff --git a/ambari-server/src/test/resources/bad-stacks/HDP/0.1/services/YARN/configuration/yarn-site.xml b/ambari-server/src/test/resources/bad-stacks/HDP/0.1/services/YARN/configuration/yarn-site.xml
index 1b6b118..94f290b 100644
--- a/ambari-server/src/test/resources/bad-stacks/HDP/0.1/services/YARN/configuration/yarn-site.xml
+++ b/ambari-server/src/test/resources/bad-stacks/HDP/0.1/services/YARN/configuration/yarn-site.xml
@@ -23,16 +23,14 @@
     <name>yarn.resourcemanager.resource-tracker.address</name>
     <value>localhost:8025</value>
     <deleted>true</deleted>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>yarn.resourcemanager.scheduler.address</name>
     <value>localhost:8030</value>
     <description>The address of the scheduler interface.</description>
     <deleted>true</deleted>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>yarn.resourcemanager.address</name>
@@ -41,21 +39,18 @@
       The address of the applications manager interface in the
       RM.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>yarn.resourcemanager.admin.address</name>
     <value/>
     <description>The address of the RM admin interface.</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>new-yarn-property</name>
     <value>some-value</value>
     <description>some description.</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
 </configuration>

http://git-wip-us.apache.org/repos/asf/ambari/blob/a998371a/ambari-server/src/test/resources/common-services/HBASE/1.0/configuration/hbase-site.xml
----------------------------------------------------------------------
diff --git a/ambari-server/src/test/resources/common-services/HBASE/1.0/configuration/hbase-site.xml b/ambari-server/src/test/resources/common-services/HBASE/1.0/configuration/hbase-site.xml
index 38eb42e..afe544c 100644
--- a/ambari-server/src/test/resources/common-services/HBASE/1.0/configuration/hbase-site.xml
+++ b/ambari-server/src/test/resources/common-services/HBASE/1.0/configuration/hbase-site.xml
@@ -29,16 +29,14 @@
     in milliseconds.  Default is 15. Set this value low if you want unit
     tests to be responsive.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>hbase.client.pause</name>
     <value>5000</value>
     <description>General client pause value.  Used mostly as value to wait
     before running a retry of a failed get, region lookup, etc.</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>hbase.master.meta.thread.rescanfrequency</name>
@@ -46,8 +44,7 @@
     <description>How long the HMaster sleeps (in milliseconds) between scans of
     the root and meta tables.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>hbase.server.thread.wakefrequency</name>
@@ -55,8 +52,7 @@
     <description>Time to sleep in between searches for work (in milliseconds).
     Used as sleep interval by service threads such as META scanner and log roller.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>hbase.regionserver.handler.count</name>
@@ -65,8 +61,7 @@
     Same property is used by the HMaster for count of master handlers.
     Default is 10.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>hbase.master.lease.period</name>
@@ -76,8 +71,7 @@
     value has been reduced so that the master will notice a dead region server
     sooner. The default is 30 seconds.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>hbase.master.info.port</name>
@@ -85,8 +79,7 @@
     <description>The port for the hbase master web UI
     Set to -1 if you do not want the info server to run.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>hbase.regionserver.info.port</name>
@@ -94,8 +87,7 @@
     <description>The port for the hbase regionserver web UI
     Set to -1 if you do not want the info server to run.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>hbase.regionserver.info.port.auto</name>
@@ -104,8 +96,7 @@
     search if hbase.regionserver.info.port is already in use.
     Enabled for testing to run multiple tests on one machine.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>hbase.master.lease.thread.wakefrequency</name>
@@ -114,8 +105,7 @@
     This value has been reduced due to the other reduced values above so that
     the master will notice a dead region server sooner. The default is 15 seconds.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>hbase.regionserver.optionalcacheflushinterval</name>
@@ -124,8 +114,7 @@
     Amount of time to wait since the last time a region was flushed before
     invoking an optional cache flush. Default 60,000.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>hbase.regionserver.safemode</name>
@@ -134,8 +123,7 @@
     Turn on/off safe mode in region server. Always on for production, always off
     for tests.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>hbase.hregion.max.filesize</name>
@@ -146,14 +134,12 @@
 
     Keep the maximum filesize small so we split more often in tests.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>hadoop.log.dir</name>
     <value>${user.dir}/../logs</value>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>hbase.zookeeper.property.clientPort</name>
@@ -161,7 +147,6 @@
     <description>Property from ZooKeeper's config zoo.cfg.
     The port at which the clients will connect.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
 </configuration>

http://git-wip-us.apache.org/repos/asf/ambari/blob/a998371a/ambari-server/src/test/resources/common-services/HDFS/1.0/configuration/hbase-site.xml
----------------------------------------------------------------------
diff --git a/ambari-server/src/test/resources/common-services/HDFS/1.0/configuration/hbase-site.xml b/ambari-server/src/test/resources/common-services/HDFS/1.0/configuration/hbase-site.xml
index 38eb42e..afe544c 100644
--- a/ambari-server/src/test/resources/common-services/HDFS/1.0/configuration/hbase-site.xml
+++ b/ambari-server/src/test/resources/common-services/HDFS/1.0/configuration/hbase-site.xml
@@ -29,16 +29,14 @@
     in milliseconds.  Default is 15. Set this value low if you want unit
     tests to be responsive.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>hbase.client.pause</name>
     <value>5000</value>
     <description>General client pause value.  Used mostly as value to wait
     before running a retry of a failed get, region lookup, etc.</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>hbase.master.meta.thread.rescanfrequency</name>
@@ -46,8 +44,7 @@
     <description>How long the HMaster sleeps (in milliseconds) between scans of
     the root and meta tables.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>hbase.server.thread.wakefrequency</name>
@@ -55,8 +52,7 @@
     <description>Time to sleep in between searches for work (in milliseconds).
     Used as sleep interval by service threads such as META scanner and log roller.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>hbase.regionserver.handler.count</name>
@@ -65,8 +61,7 @@
     Same property is used by the HMaster for count of master handlers.
     Default is 10.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>hbase.master.lease.period</name>
@@ -76,8 +71,7 @@
     value has been reduced so that the master will notice a dead region server
     sooner. The default is 30 seconds.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>hbase.master.info.port</name>
@@ -85,8 +79,7 @@
     <description>The port for the hbase master web UI
     Set to -1 if you do not want the info server to run.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>hbase.regionserver.info.port</name>
@@ -94,8 +87,7 @@
     <description>The port for the hbase regionserver web UI
     Set to -1 if you do not want the info server to run.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>hbase.regionserver.info.port.auto</name>
@@ -104,8 +96,7 @@
     search if hbase.regionserver.info.port is already in use.
     Enabled for testing to run multiple tests on one machine.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>hbase.master.lease.thread.wakefrequency</name>
@@ -114,8 +105,7 @@
     This value has been reduced due to the other reduced values above so that
     the master will notice a dead region server sooner. The default is 15 seconds.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>hbase.regionserver.optionalcacheflushinterval</name>
@@ -124,8 +114,7 @@
     Amount of time to wait since the last time a region was flushed before
     invoking an optional cache flush. Default 60,000.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>hbase.regionserver.safemode</name>
@@ -134,8 +123,7 @@
     Turn on/off safe mode in region server. Always on for production, always off
     for tests.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>hbase.hregion.max.filesize</name>
@@ -146,14 +134,12 @@
 
     Keep the maximum filesize small so we split more often in tests.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>hadoop.log.dir</name>
     <value>${user.dir}/../logs</value>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>hbase.zookeeper.property.clientPort</name>
@@ -161,7 +147,6 @@
     <description>Property from ZooKeeper's config zoo.cfg.
     The port at which the clients will connect.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
 </configuration>

http://git-wip-us.apache.org/repos/asf/ambari/blob/a998371a/ambari-server/src/test/resources/common-services/HDFS/1.0/configuration/hdfs-site.xml
----------------------------------------------------------------------
diff --git a/ambari-server/src/test/resources/common-services/HDFS/1.0/configuration/hdfs-site.xml b/ambari-server/src/test/resources/common-services/HDFS/1.0/configuration/hdfs-site.xml
index fc70b1b..6f96077 100644
--- a/ambari-server/src/test/resources/common-services/HDFS/1.0/configuration/hdfs-site.xml
+++ b/ambari-server/src/test/resources/common-services/HDFS/1.0/configuration/hdfs-site.xml
@@ -28,32 +28,28 @@
       of directories then the name table is replicated in all of the
       directories, for redundancy. </description>
     <final>true</final>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.support.append</name>
     <value>true</value>
     <description>to enable dfs append</description>
     <final>true</final>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.webhdfs.enabled</name>
     <value>false</value>
     <description>to enable webhdfs</description>
     <final>true</final>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.datanode.failed.volumes.tolerated</name>
     <value>0</value>
     <description>#of failed disks dn would tolerate</description>
     <final>true</final>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.block.local-path-access.user</name>
@@ -62,8 +58,7 @@
     circuit reads.
     </description>
     <final>true</final>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.data.dir</name>
@@ -75,8 +70,7 @@
   Directories that do not exist are ignored.
   </description>
     <final>true</final>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.hosts.exclude</name>
@@ -85,8 +79,7 @@
     not permitted to connect to the namenode.  The full pathname of the
     file must be specified.  If the value is empty, no hosts are
     excluded.</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.hosts</name>
@@ -95,31 +88,27 @@
     permitted to connect to the namenode. The full pathname of the file
     must be specified.  If the value is empty, all hosts are
     permitted.</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.replication.max</name>
     <value>50</value>
     <description>Maximal block replication.
   </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.replication</name>
     <value>3</value>
     <description>Default block replication.
   </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.heartbeat.interval</name>
     <value>3</value>
     <description>Determines datanode heartbeat interval in seconds.</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.safemode.threshold.pct</name>
@@ -130,8 +119,7 @@
         Values less than or equal to 0 mean not to start in safe mode.
         Values greater than 1 will make safe mode permanent.
         </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.balance.bandwidthPerSec</name>
@@ -141,27 +129,23 @@
         can utilize for the balancing purpose in term of
         the number of bytes per second.
   </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.datanode.address</name>
     <value>0.0.0.0:50010</value>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.datanode.http.address</name>
     <value>0.0.0.0:50075</value>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.block.size</name>
     <value>134217728</value>
     <description>The default block size for new files.</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.http.address</name>
@@ -169,8 +153,7 @@
     <description>The name of the default file system.  Either the
 literal string "local" or a host:port for HDFS.</description>
     <final>true</final>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.datanode.du.reserved</name>
@@ -178,8 +161,7 @@ literal string "local" or a host:port for HDFS.</description>
     <value>1073741824</value>
     <description>Reserved space in bytes per volume. Always leave this much space free for non dfs use.
 </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.datanode.ipc.address</name>
@@ -188,29 +170,25 @@ literal string "local" or a host:port for HDFS.</description>
 The datanode ipc server address and port.
 If the port is 0 then the server will start on a free port.
 </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.blockreport.initialDelay</name>
     <value>120</value>
     <description>Delay for first block report in seconds.</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.namenode.handler.count</name>
     <value>40</value>
     <description>The number of server threads for the namenode.</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.datanode.max.xcievers</name>
     <value>1024</value>
     <description>PRIVATE CONFIG VARIABLE</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <!-- Permissions configuration -->
   <property>
@@ -219,8 +197,7 @@ If the port is 0 then the server will start on a free port.
     <description>
 The octal umask used when creating files and directories.
 </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.web.ugi</name>
@@ -229,8 +206,7 @@ The octal umask used when creating files and directories.
     <description>The user account used by the web interface.
 Syntax: USERNAME,GROUP1,GROUP2, ...
 </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.permissions</name>
@@ -242,28 +218,24 @@ but all other behavior is unchanged.
 Switching from one parameter value to the other does not change the mode,
 owner or group of files or directories.
 </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.permissions.supergroup</name>
     <value>hdfs</value>
     <description>The name of the group of super-users.</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.namenode.handler.count</name>
     <value>100</value>
     <description>Added to grow Queue size so that more client connections are allowed</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>ipc.server.max.response.size</name>
     <value>5242880</value>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.block.access.token.enable</name>
@@ -272,8 +244,7 @@ owner or group of files or directories.
 If "true", access tokens are used as capabilities for accessing datanodes.
 If "false", no access tokens are checked on accessing datanodes.
 </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.namenode.kerberos.principal</name>
@@ -281,8 +252,7 @@ If "false", no access tokens are checked on accessing datanodes.
     <description>
 Kerberos principal name for the NameNode
 </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.secondary.namenode.kerberos.principal</name>
@@ -290,8 +260,7 @@ Kerberos principal name for the NameNode
     <description>
         Kerberos principal name for the secondary NameNode.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <!--
   This is KRB DOMAIN specific. The FQDN of the namenode has to be mentioned.
@@ -300,30 +269,26 @@ Kerberos principal name for the NameNode
     <name>dfs.namenode.kerberos.https.principal</name>
     <value>host/_HOST@</value>
     <description>The Kerberos principal for the host that the NameNode runs on.</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.secondary.namenode.kerberos.https.principal</name>
     <value>host/_HOST@</value>
     <description>The Kerberos principal for the hostthat the secondary NameNode runs on.</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <!-- cluster variant -->
     <name>dfs.secondary.http.address</name>
     <value>hdp2.cybervisiontech.com.ua:50090</value>
     <description>Address of secondary namenode web server</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.secondary.https.port</name>
     <value>50490</value>
     <description>The https port where secondary-namenode binds</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.web.authentication.kerberos.principal</name>
@@ -333,8 +298,7 @@ Kerberos principal name for the NameNode
       The HTTP Kerberos principal MUST start with 'HTTP/' per Kerberos
       HTTP SPENGO specification.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.web.authentication.kerberos.keytab</name>
@@ -343,8 +307,7 @@ Kerberos principal name for the NameNode
       The Kerberos keytab file with the credentials for the
       HTTP Kerberos principal used by Hadoop-Auth in the HTTP endpoint.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.datanode.kerberos.principal</name>
@@ -352,8 +315,7 @@ Kerberos principal name for the NameNode
     <description>
         The Kerberos principal that the DataNode runs as. "_HOST" is replaced by the real host name.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.namenode.keytab.file</name>
@@ -361,8 +323,7 @@ Kerberos principal name for the NameNode
     <description>
         Combined keytab file containing the namenode service and host principals.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.secondary.namenode.keytab.file</name>
@@ -370,8 +331,7 @@ Kerberos principal name for the NameNode
     <description>
         Combined keytab file containing the namenode service and host principals.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.datanode.keytab.file</name>
@@ -379,22 +339,19 @@ Kerberos principal name for the NameNode
     <description>
         The filename of the keytab file for the DataNode.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.https.port</name>
     <value>50470</value>
     <description>The https port where namenode binds</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.https.address</name>
     <value>hdp1.cybervisiontech.com.ua:50470</value>
     <description>The https address where namenode binds</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.datanode.data.dir.perm</name>
@@ -403,8 +360,7 @@ Kerberos principal name for the NameNode
 directories. The datanode will not come up if the permissions are
 different on existing dfs.data.dir directories. If the directories
 don't exist, they will be created with this permission.</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.access.time.precision</name>
@@ -413,21 +369,18 @@ don't exist, they will be created with this permission.</description>
                The default value is 1 hour. Setting a value of 0 disables
                access times for HDFS.
   </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.cluster.administrators</name>
     <value> hdfs</value>
     <description>ACL for who all can view the default servlets in the HDFS</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>ipc.server.read.threadpool.size</name>
     <value>5</value>
     <description/>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
 </configuration>

http://git-wip-us.apache.org/repos/asf/ambari/blob/a998371a/ambari-server/src/test/resources/common-services/MAPREDUCE/1.0/configuration/hbase-site.xml
----------------------------------------------------------------------
diff --git a/ambari-server/src/test/resources/common-services/MAPREDUCE/1.0/configuration/hbase-site.xml b/ambari-server/src/test/resources/common-services/MAPREDUCE/1.0/configuration/hbase-site.xml
index 38eb42e..afe544c 100644
--- a/ambari-server/src/test/resources/common-services/MAPREDUCE/1.0/configuration/hbase-site.xml
+++ b/ambari-server/src/test/resources/common-services/MAPREDUCE/1.0/configuration/hbase-site.xml
@@ -29,16 +29,14 @@
     in milliseconds.  Default is 15. Set this value low if you want unit
     tests to be responsive.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>hbase.client.pause</name>
     <value>5000</value>
     <description>General client pause value.  Used mostly as value to wait
     before running a retry of a failed get, region lookup, etc.</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>hbase.master.meta.thread.rescanfrequency</name>
@@ -46,8 +44,7 @@
     <description>How long the HMaster sleeps (in milliseconds) between scans of
     the root and meta tables.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>hbase.server.thread.wakefrequency</name>
@@ -55,8 +52,7 @@
     <description>Time to sleep in between searches for work (in milliseconds).
     Used as sleep interval by service threads such as META scanner and log roller.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>hbase.regionserver.handler.count</name>
@@ -65,8 +61,7 @@
     Same property is used by the HMaster for count of master handlers.
     Default is 10.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>hbase.master.lease.period</name>
@@ -76,8 +71,7 @@
     value has been reduced so that the master will notice a dead region server
     sooner. The default is 30 seconds.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>hbase.master.info.port</name>
@@ -85,8 +79,7 @@
     <description>The port for the hbase master web UI
     Set to -1 if you do not want the info server to run.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>hbase.regionserver.info.port</name>
@@ -94,8 +87,7 @@
     <description>The port for the hbase regionserver web UI
     Set to -1 if you do not want the info server to run.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>hbase.regionserver.info.port.auto</name>
@@ -104,8 +96,7 @@
     search if hbase.regionserver.info.port is already in use.
     Enabled for testing to run multiple tests on one machine.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>hbase.master.lease.thread.wakefrequency</name>
@@ -114,8 +105,7 @@
     This value has been reduced due to the other reduced values above so that
     the master will notice a dead region server sooner. The default is 15 seconds.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>hbase.regionserver.optionalcacheflushinterval</name>
@@ -124,8 +114,7 @@
     Amount of time to wait since the last time a region was flushed before
     invoking an optional cache flush. Default 60,000.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>hbase.regionserver.safemode</name>
@@ -134,8 +123,7 @@
     Turn on/off safe mode in region server. Always on for production, always off
     for tests.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>hbase.hregion.max.filesize</name>
@@ -146,14 +134,12 @@
 
     Keep the maximum filesize small so we split more often in tests.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>hadoop.log.dir</name>
     <value>${user.dir}/../logs</value>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>hbase.zookeeper.property.clientPort</name>
@@ -161,7 +147,6 @@
     <description>Property from ZooKeeper's config zoo.cfg.
     The port at which the clients will connect.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
 </configuration>

http://git-wip-us.apache.org/repos/asf/ambari/blob/a998371a/ambari-server/src/test/resources/common-services/MAPREDUCE/1.0/configuration/hdfs-site.xml
----------------------------------------------------------------------
diff --git a/ambari-server/src/test/resources/common-services/MAPREDUCE/1.0/configuration/hdfs-site.xml b/ambari-server/src/test/resources/common-services/MAPREDUCE/1.0/configuration/hdfs-site.xml
index fc70b1b..6f96077 100644
--- a/ambari-server/src/test/resources/common-services/MAPREDUCE/1.0/configuration/hdfs-site.xml
+++ b/ambari-server/src/test/resources/common-services/MAPREDUCE/1.0/configuration/hdfs-site.xml
@@ -28,32 +28,28 @@
       of directories then the name table is replicated in all of the
       directories, for redundancy. </description>
     <final>true</final>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.support.append</name>
     <value>true</value>
     <description>to enable dfs append</description>
     <final>true</final>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.webhdfs.enabled</name>
     <value>false</value>
     <description>to enable webhdfs</description>
     <final>true</final>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.datanode.failed.volumes.tolerated</name>
     <value>0</value>
     <description>#of failed disks dn would tolerate</description>
     <final>true</final>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.block.local-path-access.user</name>
@@ -62,8 +58,7 @@
     circuit reads.
     </description>
     <final>true</final>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.data.dir</name>
@@ -75,8 +70,7 @@
   Directories that do not exist are ignored.
   </description>
     <final>true</final>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.hosts.exclude</name>
@@ -85,8 +79,7 @@
     not permitted to connect to the namenode.  The full pathname of the
     file must be specified.  If the value is empty, no hosts are
     excluded.</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.hosts</name>
@@ -95,31 +88,27 @@
     permitted to connect to the namenode. The full pathname of the file
     must be specified.  If the value is empty, all hosts are
     permitted.</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.replication.max</name>
     <value>50</value>
     <description>Maximal block replication.
   </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.replication</name>
     <value>3</value>
     <description>Default block replication.
   </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.heartbeat.interval</name>
     <value>3</value>
     <description>Determines datanode heartbeat interval in seconds.</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.safemode.threshold.pct</name>
@@ -130,8 +119,7 @@
         Values less than or equal to 0 mean not to start in safe mode.
         Values greater than 1 will make safe mode permanent.
         </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.balance.bandwidthPerSec</name>
@@ -141,27 +129,23 @@
         can utilize for the balancing purpose in term of
         the number of bytes per second.
   </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.datanode.address</name>
     <value>0.0.0.0:50010</value>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.datanode.http.address</name>
     <value>0.0.0.0:50075</value>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.block.size</name>
     <value>134217728</value>
     <description>The default block size for new files.</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.http.address</name>
@@ -169,8 +153,7 @@
     <description>The name of the default file system.  Either the
 literal string "local" or a host:port for HDFS.</description>
     <final>true</final>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.datanode.du.reserved</name>
@@ -178,8 +161,7 @@ literal string "local" or a host:port for HDFS.</description>
     <value>1073741824</value>
     <description>Reserved space in bytes per volume. Always leave this much space free for non dfs use.
 </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.datanode.ipc.address</name>
@@ -188,29 +170,25 @@ literal string "local" or a host:port for HDFS.</description>
 The datanode ipc server address and port.
 If the port is 0 then the server will start on a free port.
 </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.blockreport.initialDelay</name>
     <value>120</value>
     <description>Delay for first block report in seconds.</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.namenode.handler.count</name>
     <value>40</value>
     <description>The number of server threads for the namenode.</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.datanode.max.xcievers</name>
     <value>1024</value>
     <description>PRIVATE CONFIG VARIABLE</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <!-- Permissions configuration -->
   <property>
@@ -219,8 +197,7 @@ If the port is 0 then the server will start on a free port.
     <description>
 The octal umask used when creating files and directories.
 </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.web.ugi</name>
@@ -229,8 +206,7 @@ The octal umask used when creating files and directories.
     <description>The user account used by the web interface.
 Syntax: USERNAME,GROUP1,GROUP2, ...
 </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.permissions</name>
@@ -242,28 +218,24 @@ but all other behavior is unchanged.
 Switching from one parameter value to the other does not change the mode,
 owner or group of files or directories.
 </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.permissions.supergroup</name>
     <value>hdfs</value>
     <description>The name of the group of super-users.</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.namenode.handler.count</name>
     <value>100</value>
     <description>Added to grow Queue size so that more client connections are allowed</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>ipc.server.max.response.size</name>
     <value>5242880</value>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.block.access.token.enable</name>
@@ -272,8 +244,7 @@ owner or group of files or directories.
 If "true", access tokens are used as capabilities for accessing datanodes.
 If "false", no access tokens are checked on accessing datanodes.
 </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.namenode.kerberos.principal</name>
@@ -281,8 +252,7 @@ If "false", no access tokens are checked on accessing datanodes.
     <description>
 Kerberos principal name for the NameNode
 </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.secondary.namenode.kerberos.principal</name>
@@ -290,8 +260,7 @@ Kerberos principal name for the NameNode
     <description>
         Kerberos principal name for the secondary NameNode.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <!--
   This is KRB DOMAIN specific. The FQDN of the namenode has to be mentioned.
@@ -300,30 +269,26 @@ Kerberos principal name for the NameNode
     <name>dfs.namenode.kerberos.https.principal</name>
     <value>host/_HOST@</value>
     <description>The Kerberos principal for the host that the NameNode runs on.</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.secondary.namenode.kerberos.https.principal</name>
     <value>host/_HOST@</value>
     <description>The Kerberos principal for the hostthat the secondary NameNode runs on.</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <!-- cluster variant -->
     <name>dfs.secondary.http.address</name>
     <value>hdp2.cybervisiontech.com.ua:50090</value>
     <description>Address of secondary namenode web server</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.secondary.https.port</name>
     <value>50490</value>
     <description>The https port where secondary-namenode binds</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.web.authentication.kerberos.principal</name>
@@ -333,8 +298,7 @@ Kerberos principal name for the NameNode
       The HTTP Kerberos principal MUST start with 'HTTP/' per Kerberos
       HTTP SPENGO specification.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.web.authentication.kerberos.keytab</name>
@@ -343,8 +307,7 @@ Kerberos principal name for the NameNode
       The Kerberos keytab file with the credentials for the
       HTTP Kerberos principal used by Hadoop-Auth in the HTTP endpoint.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.datanode.kerberos.principal</name>
@@ -352,8 +315,7 @@ Kerberos principal name for the NameNode
     <description>
         The Kerberos principal that the DataNode runs as. "_HOST" is replaced by the real host name.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.namenode.keytab.file</name>
@@ -361,8 +323,7 @@ Kerberos principal name for the NameNode
     <description>
         Combined keytab file containing the namenode service and host principals.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.secondary.namenode.keytab.file</name>
@@ -370,8 +331,7 @@ Kerberos principal name for the NameNode
     <description>
         Combined keytab file containing the namenode service and host principals.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.datanode.keytab.file</name>
@@ -379,22 +339,19 @@ Kerberos principal name for the NameNode
     <description>
         The filename of the keytab file for the DataNode.
     </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.https.port</name>
     <value>50470</value>
     <description>The https port where namenode binds</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.https.address</name>
     <value>hdp1.cybervisiontech.com.ua:50470</value>
     <description>The https address where namenode binds</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.datanode.data.dir.perm</name>
@@ -403,8 +360,7 @@ Kerberos principal name for the NameNode
 directories. The datanode will not come up if the permissions are
 different on existing dfs.data.dir directories. If the directories
 don't exist, they will be created with this permission.</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.access.time.precision</name>
@@ -413,21 +369,18 @@ don't exist, they will be created with this permission.</description>
                The default value is 1 hour. Setting a value of 0 disables
                access times for HDFS.
   </description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>dfs.cluster.administrators</name>
     <value> hdfs</value>
     <description>ACL for who all can view the default servlets in the HDFS</description>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
   <property>
     <name>ipc.server.read.threadpool.size</name>
     <value>5</value>
     <description/>
-    <on-ambari-upgrade add="false" change="true" delete="true"/>
-    <on-stack-upgrade add="true" change="true" delete="false"/>
+    <on-ambari-upgrade add="true" update="false" delete="false"/>
   </property>
 </configuration>


Mime
View raw message