ambari-commits mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From jonathanhur...@apache.org
Subject [11/17] ambari git commit: AMBARI-8276 - Alerts: Remove Nagios Service From The Stack (jonathanhurley)
Date Tue, 11 Nov 2014 20:43:14 GMT
http://git-wip-us.apache.org/repos/asf/ambari/blob/e4ededeb/ambari-server/src/main/resources/stacks/HDP/1.3.2/services/NAGIOS/package/templates/nagios.cfg.j2
----------------------------------------------------------------------
diff --git a/ambari-server/src/main/resources/stacks/HDP/1.3.2/services/NAGIOS/package/templates/nagios.cfg.j2 b/ambari-server/src/main/resources/stacks/HDP/1.3.2/services/NAGIOS/package/templates/nagios.cfg.j2
deleted file mode 100644
index 8fd948d..0000000
--- a/ambari-server/src/main/resources/stacks/HDP/1.3.2/services/NAGIOS/package/templates/nagios.cfg.j2
+++ /dev/null
@@ -1,1368 +0,0 @@
-{#
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements.  See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership.  The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License.  You may obtain a copy of the License at
-#
-#   http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#}
-
-##############################################################################
-#
-# NAGIOS.CFG - Sample Main Config File for Nagios 3.2.3
-#
-# Read the documentation for more information on this configuration
-# file.  I've provided some comments here, but things may not be so
-# clear without further explanation.
-#
-# Last Modified: 12-14-2008
-#
-##############################################################################
-
-#
-#
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements.  See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership.  The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License.  You may obtain a copy of the License at
-#
-#   http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied.  See the License for the
-# specific language governing permissions and limitations
-# under the License.
-#
-#
-
-# LOG FILE
-# This is the main log file where service and host events are logged
-# for historical purposes.  This should be the first option specified 
-# in the config file!!!
-
-log_file=/var/log/nagios/nagios.log
-
-
-
-# OBJECT CONFIGURATION FILE(S)
-# These are the object configuration files in which you define hosts,
-# host groups, contacts, contact groups, services, etc.
-# You can split your object definitions across several config files
-# if you wish (as shown below), or keep them all in a single config file.
-
-# You can specify individual object config files as shown below:
-cfg_file=/etc/nagios/objects/commands.cfg
-cfg_file=/etc/nagios/objects/contacts.cfg
-cfg_file=/etc/nagios/objects/timeperiods.cfg
-cfg_file=/etc/nagios/objects/templates.cfg
-
-# Definitions for monitoring the local (Linux) host
-#cfg_file=/etc/nagios/objects/localhost.cfg
-
-# Definitions for monitoring a Windows machine
-#cfg_file=/etc/nagios/objects/windows.cfg
-
-# Definitions for monitoring a router/switch
-#cfg_file=/etc/nagios/objects/switch.cfg
-
-# Definitions for monitoring a network printer
-#cfg_file=/etc/nagios/objects/printer.cfg
-
-# Definitions for hadoop servers
-cfg_file={{nagios_host_cfg}}
-cfg_file={{nagios_hostgroup_cfg}}
-cfg_file={{nagios_servicegroup_cfg}}
-cfg_file={{nagios_service_cfg}}
-cfg_file={{nagios_command_cfg}}
-
-
-# You can also tell Nagios to process all config files (with a .cfg
-# extension) in a particular directory by using the cfg_dir
-# directive as shown below:
-
-#cfg_dir=/etc/nagios/servers
-#cfg_dir=/etc/nagios/printers
-#cfg_dir=/etc/nagios/switches
-#cfg_dir=/etc/nagios/routers
-
-
-
-
-# OBJECT CACHE FILE
-# This option determines where object definitions are cached when
-# Nagios starts/restarts.  The CGIs read object definitions from 
-# this cache file (rather than looking at the object config files
-# directly) in order to prevent inconsistencies that can occur
-# when the config files are modified after Nagios starts.
-
-object_cache_file=/var/nagios/objects.cache
-
-
-
-# PRE-CACHED OBJECT FILE
-# This options determines the location of the precached object file.
-# If you run Nagios with the -p command line option, it will preprocess
-# your object configuration file(s) and write the cached config to this
-# file.  You can then start Nagios with the -u option to have it read
-# object definitions from this precached file, rather than the standard
-# object configuration files (see the cfg_file and cfg_dir options above).
-# Using a precached object file can speed up the time needed to (re)start 
-# the Nagios process if you've got a large and/or complex configuration.
-# Read the documentation section on optimizing Nagios to find our more
-# about how this feature works.
-
-precached_object_file=/var/nagios/objects.precache
-
-
-
-# RESOURCE FILE
-# This is an optional resource file that contains $USERx$ macro
-# definitions. Multiple resource files can be specified by using
-# multiple resource_file definitions.  The CGIs will not attempt to
-# read the contents of resource files, so information that is
-# considered to be sensitive (usernames, passwords, etc) can be
-# defined as macros in this file and restrictive permissions (600)
-# can be placed on this file.
-
-resource_file={{nagios_resource_cfg}}
-
-
-
-# STATUS FILE
-# This is where the current status of all monitored services and
-# hosts is stored.  Its contents are read and processed by the CGIs.
-# The contents of the status file are deleted every time Nagios
-#  restarts.
-
-status_file=/var/nagios/status.dat
-
-
-
-# STATUS FILE UPDATE INTERVAL
-# This option determines the frequency (in seconds) that
-# Nagios will periodically dump program, host, and 
-# service status data.
-
-status_update_interval=10
-
-
-
-# NAGIOS USER
-# This determines the effective user that Nagios should run as.  
-# You can either supply a username or a UID.
-
-nagios_user={{nagios_user}}
-
-
-
-# NAGIOS GROUP
-# This determines the effective group that Nagios should run as.  
-# You can either supply a group name or a GID.
-
-nagios_group={{nagios_group}}
-
-
-
-# EXTERNAL COMMAND OPTION
-# This option allows you to specify whether or not Nagios should check
-# for external commands (in the command file defined below).  By default
-# Nagios will *not* check for external commands, just to be on the
-# cautious side.  If you want to be able to use the CGI command interface
-# you will have to enable this.
-# Values: 0 = disable commands, 1 = enable commands
-
-check_external_commands=1
-
-
-
-# EXTERNAL COMMAND CHECK INTERVAL
-# This is the interval at which Nagios should check for external commands.
-# This value works of the interval_length you specify later.  If you leave
-# that at its default value of 60 (seconds), a value of 1 here will cause
-# Nagios to check for external commands every minute.  If you specify a
-# number followed by an "s" (i.e. 15s), this will be interpreted to mean
-# actual seconds rather than a multiple of the interval_length variable.
-# Note: In addition to reading the external command file at regularly 
-# scheduled intervals, Nagios will also check for external commands after
-# event handlers are executed.
-# NOTE: Setting this value to -1 causes Nagios to check the external
-# command file as often as possible.
-
-#command_check_interval=15s
-command_check_interval=-1
-
-
-
-# EXTERNAL COMMAND FILE
-# This is the file that Nagios checks for external command requests.
-# It is also where the command CGI will write commands that are submitted
-# by users, so it must be writeable by the user that the web server
-# is running as (usually 'nobody').  Permissions should be set at the 
-# directory level instead of on the file, as the file is deleted every
-# time its contents are processed.
-
-command_file=/var/nagios/rw/nagios.cmd
-
-
-
-# EXTERNAL COMMAND BUFFER SLOTS
-# This settings is used to tweak the number of items or "slots" that
-# the Nagios daemon should allocate to the buffer that holds incoming 
-# external commands before they are processed.  As external commands 
-# are processed by the daemon, they are removed from the buffer.  
-
-external_command_buffer_slots=4096
-
-
-
-# LOCK FILE
-# This is the lockfile that Nagios will use to store its PID number
-# in when it is running in daemon mode.
-
-lock_file={{nagios_pid_file}}
-
-
-
-# TEMP FILE
-# This is a temporary file that is used as scratch space when Nagios
-# updates the status log, cleans the comment file, etc.  This file
-# is created, used, and deleted throughout the time that Nagios is
-# running.
-
-temp_file=/var/nagios/nagios.tmp
-
-
-
-# TEMP PATH
-# This is path where Nagios can create temp files for service and
-# host check results, etc.
-
-temp_path=/tmp
-
-
-
-# EVENT BROKER OPTIONS
-# Controls what (if any) data gets sent to the event broker.
-# Values:  0      = Broker nothing
-#         -1      = Broker everything
-#         <other> = See documentation
-
-event_broker_options=-1
-
-
-
-# EVENT BROKER MODULE(S)
-# This directive is used to specify an event broker module that should
-# by loaded by Nagios at startup.  Use multiple directives if you want
-# to load more than one module.  Arguments that should be passed to
-# the module at startup are seperated from the module path by a space.
-#
-#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
-# WARNING !!! WARNING !!! WARNING !!! WARNING !!! WARNING !!! WARNING
-#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
-#
-# Do NOT overwrite modules while they are being used by Nagios or Nagios
-# will crash in a fiery display of SEGFAULT glory.  This is a bug/limitation
-# either in dlopen(), the kernel, and/or the filesystem.  And maybe Nagios...
-#
-# The correct/safe way of updating a module is by using one of these methods:
-#    1. Shutdown Nagios, replace the module file, restart Nagios
-#    2. Delete the original module file, move the new module file into place, restart Nagios
-#
-# Example:
-#
-#   broker_module=<modulepath> [moduleargs]
-
-#broker_module=/somewhere/module1.o
-#broker_module=/somewhere/module2.o arg1 arg2=3 debug=0
-
-
-
-# LOG ROTATION METHOD
-# This is the log rotation method that Nagios should use to rotate
-# the main log file. Values are as follows..
-#	n	= None - don't rotate the log
-#	h	= Hourly rotation (top of the hour)
-#	d	= Daily rotation (midnight every day)
-#	w	= Weekly rotation (midnight on Saturday evening)
-#	m	= Monthly rotation (midnight last day of month)
-
-log_rotation_method=d
-
-
-
-# LOG ARCHIVE PATH
-# This is the directory where archived (rotated) log files should be 
-# placed (assuming you've chosen to do log rotation).
-
-log_archive_path=/var/log/nagios/archives
-
-
-
-# LOGGING OPTIONS
-# If you want messages logged to the syslog facility, as well as the
-# Nagios log file set this option to 1.  If not, set it to 0.
-
-use_syslog=1
-
-
-
-# NOTIFICATION LOGGING OPTION
-# If you don't want notifications to be logged, set this value to 0.
-# If notifications should be logged, set the value to 1.
-
-log_notifications=1
-
-
-
-# SERVICE RETRY LOGGING OPTION
-# If you don't want service check retries to be logged, set this value
-# to 0.  If retries should be logged, set the value to 1.
-
-log_service_retries=1
-
-
-
-# HOST RETRY LOGGING OPTION
-# If you don't want host check retries to be logged, set this value to
-# 0.  If retries should be logged, set the value to 1.
-
-log_host_retries=1
-
-
-
-# EVENT HANDLER LOGGING OPTION
-# If you don't want host and service event handlers to be logged, set
-# this value to 0.  If event handlers should be logged, set the value
-# to 1.
-
-log_event_handlers=1
-
-
-
-# INITIAL STATES LOGGING OPTION
-# If you want Nagios to log all initial host and service states to
-# the main log file (the first time the service or host is checked)
-# you can enable this option by setting this value to 1.  If you
-# are not using an external application that does long term state
-# statistics reporting, you do not need to enable this option.  In
-# this case, set the value to 0.
-
-log_initial_states=0
-
-
-
-# EXTERNAL COMMANDS LOGGING OPTION
-# If you don't want Nagios to log external commands, set this value
-# to 0.  If external commands should be logged, set this value to 1.
-# Note: This option does not include logging of passive service
-# checks - see the option below for controlling whether or not
-# passive checks are logged.
-
-log_external_commands=1
-
-
-
-# PASSIVE CHECKS LOGGING OPTION
-# If you don't want Nagios to log passive host and service checks, set
-# this value to 0.  If passive checks should be logged, set
-# this value to 1.
-
-log_passive_checks=1
-
-
-
-# GLOBAL HOST AND SERVICE EVENT HANDLERS
-# These options allow you to specify a host and service event handler
-# command that is to be run for every host or service state change.
-# The global event handler is executed immediately prior to the event
-# handler that you have optionally specified in each host or
-# service definition. The command argument is the short name of a
-# command definition that you define in your host configuration file.
-# Read the HTML docs for more information.
-
-#global_host_event_handler=somecommand
-#global_service_event_handler=somecommand
-
-
-
-# SERVICE INTER-CHECK DELAY METHOD
-# This is the method that Nagios should use when initially
-# "spreading out" service checks when it starts monitoring.  The
-# default is to use smart delay calculation, which will try to
-# space all service checks out evenly to minimize CPU load.
-# Using the dumb setting will cause all checks to be scheduled
-# at the same time (with no delay between them)!  This is not a
-# good thing for production, but is useful when testing the
-# parallelization functionality.
-#	n	= None - don't use any delay between checks
-#	d	= Use a "dumb" delay of 1 second between checks
-#	s	= Use "smart" inter-check delay calculation
-#       x.xx    = Use an inter-check delay of x.xx seconds
-
-service_inter_check_delay_method=s
-
-
-
-# MAXIMUM SERVICE CHECK SPREAD
-# This variable determines the timeframe (in minutes) from the
-# program start time that an initial check of all services should
-# be completed.  Default is 30 minutes.
-
-max_service_check_spread=30
-
-
-
-# SERVICE CHECK INTERLEAVE FACTOR
-# This variable determines how service checks are interleaved.
-# Interleaving the service checks allows for a more even
-# distribution of service checks and reduced load on remote
-# hosts.  Setting this value to 1 is equivalent to how versions
-# of Nagios previous to 0.0.5 did service checks.  Set this
-# value to s (smart) for automatic calculation of the interleave
-# factor unless you have a specific reason to change it.
-#       s       = Use "smart" interleave factor calculation
-#       x       = Use an interleave factor of x, where x is a
-#                 number greater than or equal to 1.
-
-service_interleave_factor=s
-
-
-
-# HOST INTER-CHECK DELAY METHOD
-# This is the method that Nagios should use when initially
-# "spreading out" host checks when it starts monitoring.  The
-# default is to use smart delay calculation, which will try to
-# space all host checks out evenly to minimize CPU load.
-# Using the dumb setting will cause all checks to be scheduled
-# at the same time (with no delay between them)!
-#	n	= None - don't use any delay between checks
-#	d	= Use a "dumb" delay of 1 second between checks
-#	s	= Use "smart" inter-check delay calculation
-#       x.xx    = Use an inter-check delay of x.xx seconds
-
-host_inter_check_delay_method=s
-
-
-
-# MAXIMUM HOST CHECK SPREAD
-# This variable determines the timeframe (in minutes) from the
-# program start time that an initial check of all hosts should
-# be completed.  Default is 30 minutes.
-
-max_host_check_spread=30
-
-
-
-# MAXIMUM CONCURRENT SERVICE CHECKS
-# This option allows you to specify the maximum number of 
-# service checks that can be run in parallel at any given time.
-# Specifying a value of 1 for this variable essentially prevents
-# any service checks from being parallelized.  A value of 0
-# will not restrict the number of concurrent checks that are
-# being executed.
-
-max_concurrent_checks=0
-
-
-
-# HOST AND SERVICE CHECK REAPER FREQUENCY
-# This is the frequency (in seconds!) that Nagios will process
-# the results of host and service checks.
-
-check_result_reaper_frequency=10
-
-
-
-
-# MAX CHECK RESULT REAPER TIME
-# This is the max amount of time (in seconds) that  a single
-# check result reaper event will be allowed to run before 
-# returning control back to Nagios so it can perform other
-# duties.
-
-max_check_result_reaper_time=30
-
-
-
-
-# CHECK RESULT PATH
-# This is directory where Nagios stores the results of host and
-# service checks that have not yet been processed.
-#
-# Note: Make sure that only one instance of Nagios has access
-# to this directory!  
-
-check_result_path=/var/nagios/spool/checkresults
-
-
-
-
-# MAX CHECK RESULT FILE AGE
-# This option determines the maximum age (in seconds) which check
-# result files are considered to be valid.  Files older than this 
-# threshold will be mercilessly deleted without further processing.
-
-max_check_result_file_age=3600
-
-
-
-
-# CACHED HOST CHECK HORIZON
-# This option determines the maximum amount of time (in seconds)
-# that the state of a previous host check is considered current.
-# Cached host states (from host checks that were performed more
-# recently that the timeframe specified by this value) can immensely
-# improve performance in regards to the host check logic.
-# Too high of a value for this option may result in inaccurate host
-# states being used by Nagios, while a lower value may result in a
-# performance hit for host checks.  Use a value of 0 to disable host
-# check caching.
-
-cached_host_check_horizon=15
-
-
-
-# CACHED SERVICE CHECK HORIZON
-# This option determines the maximum amount of time (in seconds)
-# that the state of a previous service check is considered current.
-# Cached service states (from service checks that were performed more
-# recently that the timeframe specified by this value) can immensely
-# improve performance in regards to predictive dependency checks.
-# Use a value of 0 to disable service check caching.
-
-cached_service_check_horizon=15
-
-
-
-# ENABLE PREDICTIVE HOST DEPENDENCY CHECKS
-# This option determines whether or not Nagios will attempt to execute
-# checks of hosts when it predicts that future dependency logic test
-# may be needed.  These predictive checks can help ensure that your
-# host dependency logic works well.
-# Values:
-#  0 = Disable predictive checks
-#  1 = Enable predictive checks (default)
-
-enable_predictive_host_dependency_checks=1
-
-
-
-# ENABLE PREDICTIVE SERVICE DEPENDENCY CHECKS
-# This option determines whether or not Nagios will attempt to execute
-# checks of service when it predicts that future dependency logic test
-# may be needed.  These predictive checks can help ensure that your
-# service dependency logic works well.
-# Values:
-#  0 = Disable predictive checks
-#  1 = Enable predictive checks (default)
-
-enable_predictive_service_dependency_checks=1
-
-
-
-# SOFT STATE DEPENDENCIES
-# This option determines whether or not Nagios will use soft state 
-# information when checking host and service dependencies. Normally 
-# Nagios will only use the latest hard host or service state when 
-# checking dependencies. If you want it to use the latest state (regardless
-# of whether its a soft or hard state type), enable this option. 
-# Values:
-#  0 = Don't use soft state dependencies (default) 
-#  1 = Use soft state dependencies 
-
-soft_state_dependencies=0
-
-
-
-# TIME CHANGE ADJUSTMENT THRESHOLDS
-# These options determine when Nagios will react to detected changes
-# in system time (either forward or backwards).
-
-#time_change_threshold=900
-
-
-
-# AUTO-RESCHEDULING OPTION
-# This option determines whether or not Nagios will attempt to
-# automatically reschedule active host and service checks to
-# "smooth" them out over time.  This can help balance the load on
-# the monitoring server.  
-# WARNING: THIS IS AN EXPERIMENTAL FEATURE - IT CAN DEGRADE
-# PERFORMANCE, RATHER THAN INCREASE IT, IF USED IMPROPERLY
-
-auto_reschedule_checks=0
-
-
-
-# AUTO-RESCHEDULING INTERVAL
-# This option determines how often (in seconds) Nagios will
-# attempt to automatically reschedule checks.  This option only
-# has an effect if the auto_reschedule_checks option is enabled.
-# Default is 30 seconds.
-# WARNING: THIS IS AN EXPERIMENTAL FEATURE - IT CAN DEGRADE
-# PERFORMANCE, RATHER THAN INCREASE IT, IF USED IMPROPERLY
-
-auto_rescheduling_interval=30
-
-
-
-# AUTO-RESCHEDULING WINDOW
-# This option determines the "window" of time (in seconds) that
-# Nagios will look at when automatically rescheduling checks.
-# Only host and service checks that occur in the next X seconds
-# (determined by this variable) will be rescheduled. This option
-# only has an effect if the auto_reschedule_checks option is
-# enabled.  Default is 180 seconds (3 minutes).
-# WARNING: THIS IS AN EXPERIMENTAL FEATURE - IT CAN DEGRADE
-# PERFORMANCE, RATHER THAN INCREASE IT, IF USED IMPROPERLY
-
-auto_rescheduling_window=180
-
-
-
-# SLEEP TIME
-# This is the number of seconds to sleep between checking for system
-# events and service checks that need to be run.
-
-sleep_time=0.25
-
-
-
-# TIMEOUT VALUES
-# These options control how much time Nagios will allow various
-# types of commands to execute before killing them off.  Options
-# are available for controlling maximum time allotted for
-# service checks, host checks, event handlers, notifications, the
-# ocsp command, and performance data commands.  All values are in
-# seconds.
-
-service_check_timeout=60
-host_check_timeout=30
-event_handler_timeout=30
-notification_timeout=30
-ocsp_timeout=5
-perfdata_timeout=5
-
-
-
-# RETAIN STATE INFORMATION
-# This setting determines whether or not Nagios will save state
-# information for services and hosts before it shuts down.  Upon
-# startup Nagios will reload all saved service and host state
-# information before starting to monitor.  This is useful for 
-# maintaining long-term data on state statistics, etc, but will
-# slow Nagios down a bit when it (re)starts.  Since its only
-# a one-time penalty, I think its well worth the additional
-# startup delay.
-
-retain_state_information=1
-
-
-
-# STATE RETENTION FILE
-# This is the file that Nagios should use to store host and
-# service state information before it shuts down.  The state 
-# information in this file is also read immediately prior to
-# starting to monitor the network when Nagios is restarted.
-# This file is used only if the retain_state_information
-# variable is set to 1.
-
-state_retention_file=/var/nagios/retention.dat
-
-
-
-# RETENTION DATA UPDATE INTERVAL
-# This setting determines how often (in minutes) that Nagios
-# will automatically save retention data during normal operation.
-# If you set this value to 0, Nagios will not save retention
-# data at regular interval, but it will still save retention
-# data before shutting down or restarting.  If you have disabled
-# state retention, this option has no effect.
-
-retention_update_interval=60
-
-
-
-# USE RETAINED PROGRAM STATE
-# This setting determines whether or not Nagios will set 
-# program status variables based on the values saved in the
-# retention file.  If you want to use retained program status
-# information, set this value to 1.  If not, set this value
-# to 0.
-
-use_retained_program_state=1
-
-
-
-# USE RETAINED SCHEDULING INFO
-# This setting determines whether or not Nagios will retain
-# the scheduling info (next check time) for hosts and services
-# based on the values saved in the retention file.  If you
-# If you want to use retained scheduling info, set this
-# value to 1.  If not, set this value to 0.
-
-use_retained_scheduling_info=1
-
-
-
-# RETAINED ATTRIBUTE MASKS (ADVANCED FEATURE)
-# The following variables are used to specify specific host and
-# service attributes that should *not* be retained by Nagios during
-# program restarts.
-#
-# The values of the masks are bitwise ANDs of values specified
-# by the "MODATTR_" definitions found in include/common.h.  
-# For example, if you do not want the current enabled/disabled state
-# of flap detection and event handlers for hosts to be retained, you
-# would use a value of 24 for the host attribute mask...
-# MODATTR_EVENT_HANDLER_ENABLED (8) + MODATTR_FLAP_DETECTION_ENABLED (16) = 24
-
-# This mask determines what host attributes are not retained
-retained_host_attribute_mask=0
-
-# This mask determines what service attributes are not retained
-retained_service_attribute_mask=0
-
-# These two masks determine what process attributes are not retained.
-# There are two masks, because some process attributes have host and service
-# options.  For example, you can disable active host checks, but leave active
-# service checks enabled.
-retained_process_host_attribute_mask=0
-retained_process_service_attribute_mask=0
-
-# These two masks determine what contact attributes are not retained.
-# There are two masks, because some contact attributes have host and
-# service options.  For example, you can disable host notifications for
-# a contact, but leave service notifications enabled for them.
-retained_contact_host_attribute_mask=0
-retained_contact_service_attribute_mask=0
-
-
-
-# INTERVAL LENGTH
-# This is the seconds per unit interval as used in the
-# host/contact/service configuration files.  Setting this to 60 means
-# that each interval is one minute long (60 seconds).  Other settings
-# have not been tested much, so your mileage is likely to vary...
-
-interval_length=60
-
-
-
-# CHECK FOR UPDATES
-# This option determines whether Nagios will automatically check to
-# see if new updates (releases) are available.  It is recommend that you
-# enable this option to ensure that you stay on top of the latest critical
-# patches to Nagios.  Nagios is critical to you - make sure you keep it in
-# good shape.  Nagios will check once a day for new updates. Data collected
-# by Nagios Enterprises from the update check is processed in accordance 
-# with our privacy policy - see http://api.nagios.org for details.
-
-check_for_updates=1
-
-
-
-# BARE UPDATE CHECK
-# This option deterines what data Nagios will send to api.nagios.org when
-# it checks for updates.  By default, Nagios will send information on the 
-# current version of Nagios you have installed, as well as an indicator as
-# to whether this was a new installation or not.  Nagios Enterprises uses
-# this data to determine the number of users running specific version of 
-# Nagios.  Enable this option if you do not want this information to be sent.
-
-bare_update_check=0
-
-
-
-# AGGRESSIVE HOST CHECKING OPTION
-# If you don't want to turn on aggressive host checking features, set
-# this value to 0 (the default).  Otherwise set this value to 1 to
-# enable the aggressive check option.  Read the docs for more info
-# on what aggressive host check is or check out the source code in
-# base/checks.c
-
-use_aggressive_host_checking=0
-
-
-
-# SERVICE CHECK EXECUTION OPTION
-# This determines whether or not Nagios will actively execute
-# service checks when it initially starts.  If this option is 
-# disabled, checks are not actively made, but Nagios can still
-# receive and process passive check results that come in.  Unless
-# you're implementing redundant hosts or have a special need for
-# disabling the execution of service checks, leave this enabled!
-# Values: 1 = enable checks, 0 = disable checks
-
-execute_service_checks=1
-
-
-
-# PASSIVE SERVICE CHECK ACCEPTANCE OPTION
-# This determines whether or not Nagios will accept passive
-# service checks results when it initially (re)starts.
-# Values: 1 = accept passive checks, 0 = reject passive checks
-
-accept_passive_service_checks=1
-
-
-
-# HOST CHECK EXECUTION OPTION
-# This determines whether or not Nagios will actively execute
-# host checks when it initially starts.  If this option is 
-# disabled, checks are not actively made, but Nagios can still
-# receive and process passive check results that come in.  Unless
-# you're implementing redundant hosts or have a special need for
-# disabling the execution of host checks, leave this enabled!
-# Values: 1 = enable checks, 0 = disable checks
-
-execute_host_checks=1
-
-
-
-# PASSIVE HOST CHECK ACCEPTANCE OPTION
-# This determines whether or not Nagios will accept passive
-# host checks results when it initially (re)starts.
-# Values: 1 = accept passive checks, 0 = reject passive checks
-
-accept_passive_host_checks=1
-
-
-
-# NOTIFICATIONS OPTION
-# This determines whether or not Nagios will sent out any host or
-# service notifications when it is initially (re)started.
-# Values: 1 = enable notifications, 0 = disable notifications
-
-enable_notifications=1
-
-
-
-# EVENT HANDLER USE OPTION
-# This determines whether or not Nagios will run any host or
-# service event handlers when it is initially (re)started.  Unless
-# you're implementing redundant hosts, leave this option enabled.
-# Values: 1 = enable event handlers, 0 = disable event handlers
-
-enable_event_handlers=1
-
-
-
-# PROCESS PERFORMANCE DATA OPTION
-# This determines whether or not Nagios will process performance
-# data returned from service and host checks.  If this option is
-# enabled, host performance data will be processed using the
-# host_perfdata_command (defined below) and service performance
-# data will be processed using the service_perfdata_command (also
-# defined below).  Read the HTML docs for more information on
-# performance data.
-# Values: 1 = process performance data, 0 = do not process performance data
-
-process_performance_data=0
-
-
-
-# HOST AND SERVICE PERFORMANCE DATA PROCESSING COMMANDS
-# These commands are run after every host and service check is
-# performed.  These commands are executed only if the
-# enable_performance_data option (above) is set to 1.  The command
-# argument is the short name of a command definition that you 
-# define in your host configuration file.  Read the HTML docs for
-# more information on performance data.
-
-#host_perfdata_command=process-host-perfdata
-#service_perfdata_command=process-service-perfdata
-
-
-
-# HOST AND SERVICE PERFORMANCE DATA FILES
-# These files are used to store host and service performance data.
-# Performance data is only written to these files if the
-# enable_performance_data option (above) is set to 1.
-
-#host_perfdata_file=/tmp/host-perfdata
-#service_perfdata_file=/tmp/service-perfdata
-
-
-
-# HOST AND SERVICE PERFORMANCE DATA FILE TEMPLATES
-# These options determine what data is written (and how) to the
-# performance data files.  The templates may contain macros, special
-# characters (\t for tab, \r for carriage return, \n for newline)
-# and plain text.  A newline is automatically added after each write
-# to the performance data file.  Some examples of what you can do are
-# shown below.
-
-#host_perfdata_file_template=[HOSTPERFDATA]\t$TIMET$\t$HOSTNAME$\t$HOSTEXECUTIONTIME$\t$HOSTOUTPUT$\t$HOSTPERFDATA$
-#service_perfdata_file_template=[SERVICEPERFDATA]\t$TIMET$\t$HOSTNAME$\t$SERVICEDESC$\t$SERVICEEXECUTIONTIME$\t$SERVICELATENCY$\t$SERVICEOUTPUT$\t$SERVICEPERFDATA$
-
-
-
-# HOST AND SERVICE PERFORMANCE DATA FILE MODES
-# This option determines whether or not the host and service
-# performance data files are opened in write ("w") or append ("a")
-# mode. If you want to use named pipes, you should use the special
-# pipe ("p") mode which avoid blocking at startup, otherwise you will
-# likely want the defult append ("a") mode.
-
-#host_perfdata_file_mode=a
-#service_perfdata_file_mode=a
-
-
-
-# HOST AND SERVICE PERFORMANCE DATA FILE PROCESSING INTERVAL
-# These options determine how often (in seconds) the host and service
-# performance data files are processed using the commands defined
-# below.  A value of 0 indicates the files should not be periodically
-# processed.
-
-#host_perfdata_file_processing_interval=0
-#service_perfdata_file_processing_interval=0
-
-
-
-# HOST AND SERVICE PERFORMANCE DATA FILE PROCESSING COMMANDS
-# These commands are used to periodically process the host and
-# service performance data files.  The interval at which the
-# processing occurs is determined by the options above.
-
-#host_perfdata_file_processing_command=process-host-perfdata-file
-#service_perfdata_file_processing_command=process-service-perfdata-file
-
-
-
-# OBSESS OVER SERVICE CHECKS OPTION
-# This determines whether or not Nagios will obsess over service
-# checks and run the ocsp_command defined below.  Unless you're
-# planning on implementing distributed monitoring, do not enable
-# this option.  Read the HTML docs for more information on
-# implementing distributed monitoring.
-# Values: 1 = obsess over services, 0 = do not obsess (default)
-
-obsess_over_services=0
-
-
-
-# OBSESSIVE COMPULSIVE SERVICE PROCESSOR COMMAND
-# This is the command that is run for every service check that is
-# processed by Nagios.  This command is executed only if the
-# obsess_over_services option (above) is set to 1.  The command 
-# argument is the short name of a command definition that you
-# define in your host configuration file. Read the HTML docs for
-# more information on implementing distributed monitoring.
-
-#ocsp_command=somecommand
-
-
-
-# OBSESS OVER HOST CHECKS OPTION
-# This determines whether or not Nagios will obsess over host
-# checks and run the ochp_command defined below.  Unless you're
-# planning on implementing distributed monitoring, do not enable
-# this option.  Read the HTML docs for more information on
-# implementing distributed monitoring.
-# Values: 1 = obsess over hosts, 0 = do not obsess (default)
-
-obsess_over_hosts=0
-
-
-
-# OBSESSIVE COMPULSIVE HOST PROCESSOR COMMAND
-# This is the command that is run for every host check that is
-# processed by Nagios.  This command is executed only if the
-# obsess_over_hosts option (above) is set to 1.  The command 
-# argument is the short name of a command definition that you
-# define in your host configuration file. Read the HTML docs for
-# more information on implementing distributed monitoring.
-
-#ochp_command=somecommand
-
-
-
-# TRANSLATE PASSIVE HOST CHECKS OPTION
-# This determines whether or not Nagios will translate
-# DOWN/UNREACHABLE passive host check results into their proper
-# state for this instance of Nagios.  This option is useful
-# if you have distributed or failover monitoring setup.  In
-# these cases your other Nagios servers probably have a different
-# "view" of the network, with regards to the parent/child relationship
-# of hosts.  If a distributed monitoring server thinks a host
-# is DOWN, it may actually be UNREACHABLE from the point of
-# this Nagios instance.  Enabling this option will tell Nagios
-# to translate any DOWN or UNREACHABLE host states it receives
-# passively into the correct state from the view of this server.
-# Values: 1 = perform translation, 0 = do not translate (default)
-
-translate_passive_host_checks=0
-
-
-
-# PASSIVE HOST CHECKS ARE SOFT OPTION
-# This determines whether or not Nagios will treat passive host
-# checks as being HARD or SOFT.  By default, a passive host check
-# result will put a host into a HARD state type.  This can be changed
-# by enabling this option.
-# Values: 0 = passive checks are HARD, 1 = passive checks are SOFT
-
-passive_host_checks_are_soft=0
-
-
-
-# ORPHANED HOST/SERVICE CHECK OPTIONS
-# These options determine whether or not Nagios will periodically 
-# check for orphaned host service checks.  Since service checks are
-# not rescheduled until the results of their previous execution 
-# instance are processed, there exists a possibility that some
-# checks may never get rescheduled.  A similar situation exists for
-# host checks, although the exact scheduling details differ a bit
-# from service checks.  Orphaned checks seem to be a rare
-# problem and should not happen under normal circumstances.
-# If you have problems with service checks never getting
-# rescheduled, make sure you have orphaned service checks enabled.
-# Values: 1 = enable checks, 0 = disable checks
-
-check_for_orphaned_services=1
-check_for_orphaned_hosts=1
-
-
-
-# SERVICE FRESHNESS CHECK OPTION
-# This option determines whether or not Nagios will periodically
-# check the "freshness" of service results.  Enabling this option
-# is useful for ensuring passive checks are received in a timely
-# manner.
-# Values: 1 = enabled freshness checking, 0 = disable freshness checking
-
-check_service_freshness=0
-
-
-
-# SERVICE FRESHNESS CHECK INTERVAL
-# This setting determines how often (in seconds) Nagios will
-# check the "freshness" of service check results.  If you have
-# disabled service freshness checking, this option has no effect.
-
-service_freshness_check_interval=60
-
-
-
-# HOST FRESHNESS CHECK OPTION
-# This option determines whether or not Nagios will periodically
-# check the "freshness" of host results.  Enabling this option
-# is useful for ensuring passive checks are received in a timely
-# manner.
-# Values: 1 = enabled freshness checking, 0 = disable freshness checking
-
-check_host_freshness=0
-
-
-
-# HOST FRESHNESS CHECK INTERVAL
-# This setting determines how often (in seconds) Nagios will
-# check the "freshness" of host check results.  If you have
-# disabled host freshness checking, this option has no effect.
-
-host_freshness_check_interval=60
-
-
-
-
-# ADDITIONAL FRESHNESS THRESHOLD LATENCY
-# This setting determines the number of seconds that Nagios
-# will add to any host and service freshness thresholds that
-# it calculates (those not explicitly specified by the user).
-
-additional_freshness_latency=15
-
-
-
-
-# FLAP DETECTION OPTION
-# This option determines whether or not Nagios will try
-# and detect hosts and services that are "flapping".  
-# Flapping occurs when a host or service changes between
-# states too frequently.  When Nagios detects that a 
-# host or service is flapping, it will temporarily suppress
-# notifications for that host/service until it stops
-# flapping.  Flap detection is very experimental, so read
-# the HTML documentation before enabling this feature!
-# Values: 1 = enable flap detection
-#         0 = disable flap detection (default)
-
-enable_flap_detection=1
-
-
-
-# FLAP DETECTION THRESHOLDS FOR HOSTS AND SERVICES
-# Read the HTML documentation on flap detection for
-# an explanation of what this option does.  This option
-# has no effect if flap detection is disabled.
-
-low_service_flap_threshold=5.0
-high_service_flap_threshold=20.0
-low_host_flap_threshold=5.0
-high_host_flap_threshold=20.0
-
-
-
-# DATE FORMAT OPTION
-# This option determines how short dates are displayed. Valid options
-# include:
-#	us		(MM-DD-YYYY HH:MM:SS)
-#	euro    	(DD-MM-YYYY HH:MM:SS)
-#	iso8601		(YYYY-MM-DD HH:MM:SS)
-#	strict-iso8601	(YYYY-MM-DDTHH:MM:SS)
-#
-
-date_format=us
-
-
-
-
-# TIMEZONE OFFSET
-# This option is used to override the default timezone that this
-# instance of Nagios runs in.  If not specified, Nagios will use
-# the system configured timezone.
-#
-# NOTE: In order to display the correct timezone in the CGIs, you
-# will also need to alter the Apache directives for the CGI path 
-# to include your timezone.  Example:
-#
-#   <Directory "/usr/local/nagios/sbin/">
-#      SetEnv TZ "Australia/Brisbane"
-#      ...
-#   </Directory>
-
-#use_timezone=US/Mountain
-#use_timezone=Australia/Brisbane
-
-
-
-
-# P1.PL FILE LOCATION
-# This value determines where the p1.pl perl script (used by the
-# embedded Perl interpreter) is located.  If you didn't compile
-# Nagios with embedded Perl support, this option has no effect.
-
-p1_file = {{nagios_p1_pl}}
-
-
-
-# EMBEDDED PERL INTERPRETER OPTION
-# This option determines whether or not the embedded Perl interpreter
-# will be enabled during runtime.  This option has no effect if Nagios
-# has not been compiled with support for embedded Perl.
-# Values: 0 = disable interpreter, 1 = enable interpreter
-
-enable_embedded_perl=1
-
-
-
-# EMBEDDED PERL USAGE OPTION
-# This option determines whether or not Nagios will process Perl plugins
-# and scripts with the embedded Perl interpreter if the plugins/scripts
-# do not explicitly indicate whether or not it is okay to do so. Read
-# the HTML documentation on the embedded Perl interpreter for more 
-# information on how this option works.
-
-use_embedded_perl_implicitly=1
-
-
-
-# ILLEGAL OBJECT NAME CHARACTERS
-# This option allows you to specify illegal characters that cannot
-# be used in host names, service descriptions, or names of other
-# object types.
-
-illegal_object_name_chars=`~!$%^&*|'"<>?,()=
-
-
-
-# ILLEGAL MACRO OUTPUT CHARACTERS
-# This option allows you to specify illegal characters that are
-# stripped from macros before being used in notifications, event
-# handlers, etc.  This DOES NOT affect macros used in service or
-# host check commands.
-# The following macros are stripped of the characters you specify:
-#	$HOSTOUTPUT$
-#	$HOSTPERFDATA$
-#	$HOSTACKAUTHOR$
-#	$HOSTACKCOMMENT$
-#	$SERVICEOUTPUT$
-#	$SERVICEPERFDATA$
-#	$SERVICEACKAUTHOR$
-#	$SERVICEACKCOMMENT$
-
-illegal_macro_output_chars=`~$&|'"<>
-
-
-
-# REGULAR EXPRESSION MATCHING
-# This option controls whether or not regular expression matching
-# takes place in the object config files.  Regular expression
-# matching is used to match host, hostgroup, service, and service
-# group names/descriptions in some fields of various object types.
-# Values: 1 = enable regexp matching, 0 = disable regexp matching
-
-use_regexp_matching=0
-
-
-
-# "TRUE" REGULAR EXPRESSION MATCHING
-# This option controls whether or not "true" regular expression 
-# matching takes place in the object config files.  This option
-# only has an effect if regular expression matching is enabled
-# (see above).  If this option is DISABLED, regular expression
-# matching only occurs if a string contains wildcard characters
-# (* and ?).  If the option is ENABLED, regexp matching occurs
-# all the time (which can be annoying).
-# Values: 1 = enable true matching, 0 = disable true matching
-
-use_true_regexp_matching=0
-
-
-
-# ADMINISTRATOR EMAIL/PAGER ADDRESSES
-# The email and pager address of a global administrator (likely you).
-# Nagios never uses these values itself, but you can access them by
-# using the $ADMINEMAIL$ and $ADMINPAGER$ macros in your notification
-# commands.
-
-admin_email=nagios@localhost
-admin_pager=pagenagios@localhost
-
-
-
-# DAEMON CORE DUMP OPTION
-# This option determines whether or not Nagios is allowed to create
-# a core dump when it runs as a daemon.  Note that it is generally
-# considered bad form to allow this, but it may be useful for
-# debugging purposes.  Enabling this option doesn't guarantee that
-# a core file will be produced, but that's just life...
-# Values: 1 - Allow core dumps
-#         0 - Do not allow core dumps (default)
-
-daemon_dumps_core=0
-
-
-
-# LARGE INSTALLATION TWEAKS OPTION
-# This option determines whether or not Nagios will take some shortcuts
-# which can save on memory and CPU usage in large Nagios installations.
-# Read the documentation for more information on the benefits/tradeoffs
-# of enabling this option.
-# Values: 1 - Enabled tweaks
-#         0 - Disable tweaks (default)
-
-use_large_installation_tweaks=1
-
-
-
-# ENABLE ENVIRONMENT MACROS
-# This option determines whether or not Nagios will make all standard
-# macros available as environment variables when host/service checks
-# and system commands (event handlers, notifications, etc.) are
-# executed.  Enabling this option can cause performance issues in 
-# large installations, as it will consume a bit more memory and (more
-# importantly) consume more CPU.
-# Values: 1 - Enable environment variable macros (default)
-#         0 - Disable environment variable macros
-
-# NAGIOS_* macros are required for Ambari Maintenance Mode (mm_wrapper.py)
-enable_environment_macros=1
-
-
-
-# CHILD PROCESS MEMORY OPTION
-# This option determines whether or not Nagios will free memory in
-# child processes (processed used to execute system commands and host/
-# service checks).  If you specify a value here, it will override
-# program defaults.
-# Value: 1 - Free memory in child processes
-#        0 - Do not free memory in child processes
-
-#free_child_process_memory=1
-
-
-
-# CHILD PROCESS FORKING BEHAVIOR
-# This option determines how Nagios will fork child processes
-# (used to execute system commands and host/service checks).  Normally
-# child processes are fork()ed twice, which provides a very high level
-# of isolation from problems.  Fork()ing once is probably enough and will
-# save a great deal on CPU usage (in large installs), so you might
-# want to consider using this.  If you specify a value here, it will
-# program defaults.
-# Value: 1 - Child processes fork() twice
-#        0 - Child processes fork() just once
-
-#child_processes_fork_twice=1
-
-
-
-# DEBUG LEVEL
-# This option determines how much (if any) debugging information will
-# be written to the debug file.  OR values together to log multiple
-# types of information.
-# Values: 
-#          -1 = Everything
-#          0 = Nothing
-#	   1 = Functions
-#          2 = Configuration
-#          4 = Process information
-#	   8 = Scheduled events
-#          16 = Host/service checks
-#          32 = Notifications
-#          64 = Event broker
-#          128 = External commands
-#          256 = Commands
-#          512 = Scheduled downtime
-#          1024 = Comments
-#          2048 = Macros
-
-debug_level=0
-
-
-
-# DEBUG VERBOSITY
-# This option determines how verbose the debug log out will be.
-# Values: 0 = Brief output
-#         1 = More detailed
-#         2 = Very detailed
-
-debug_verbosity=1
-
-
-
-# DEBUG FILE
-# This option determines where Nagios should write debugging information.
-
-debug_file=/var/log/nagios/nagios.debug
-
-
-
-# MAX DEBUG FILE SIZE
-# This option determines the maximum size (in bytes) of the debug file.  If
-# the file grows larger than this size, it will be renamed with a .old
-# extension.  If a file already exists with a .old extension it will
-# automatically be deleted.  This helps ensure your disk space usage doesn't
-# get out of control when debugging Nagios.
-
-max_debug_file_size=1000000
-
-

http://git-wip-us.apache.org/repos/asf/ambari/blob/e4ededeb/ambari-server/src/main/resources/stacks/HDP/1.3.2/services/NAGIOS/package/templates/nagios.conf.j2
----------------------------------------------------------------------
diff --git a/ambari-server/src/main/resources/stacks/HDP/1.3.2/services/NAGIOS/package/templates/nagios.conf.j2 b/ambari-server/src/main/resources/stacks/HDP/1.3.2/services/NAGIOS/package/templates/nagios.conf.j2
deleted file mode 100644
index 7db06cf..0000000
--- a/ambari-server/src/main/resources/stacks/HDP/1.3.2/services/NAGIOS/package/templates/nagios.conf.j2
+++ /dev/null
@@ -1,81 +0,0 @@
-{#
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements.  See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership.  The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License.  You may obtain a copy of the License at
-#
-#   http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#}
-
-
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements.  See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership.  The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License.  You may obtain a copy of the License at
-#
-#   http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied.  See the License for the
-# specific language governing permissions and limitations
-# under the License.
-#
-
-#
-# SAMPLE CONFIG SNIPPETS FOR APACHE WEB SERVER
-# Last Modified: 11-26-2005
-#
-# This file contains examples of entries that need
-# to be incorporated into your Apache web server
-# configuration file.  Customize the paths, etc. as
-# needed to fit your system.
-#
-
-ScriptAlias /nagios/cgi-bin "/usr/lib/nagios/cgi"
-
-<Directory "/usr/lib/nagios/cgi">
-#  SSLRequireSSL
-   Options ExecCGI
-   AllowOverride None
-   Order allow,deny
-   Allow from all
-#  Order deny,allow
-#  Deny from all
-#  Allow from 127.0.0.1
-   AuthName "Nagios Access"
-   AuthType Basic
-   AuthUserFile /etc/nagios/htpasswd.users
-   Require valid-user
-</Directory>
-
-Alias /nagios "/usr/share/nagios"
-
-<Directory "/usr/share/nagios">
-#  SSLRequireSSL
-   Options None
-   AllowOverride None
-   Order allow,deny
-   Allow from all
-#  Order deny,allow
-#  Deny from all
-#  Allow from 127.0.0.1
-   AuthName "Nagios Access"
-   AuthType Basic
-   AuthUserFile /etc/nagios/htpasswd.users
-   Require valid-user
-</Directory>
-

http://git-wip-us.apache.org/repos/asf/ambari/blob/e4ededeb/ambari-server/src/main/resources/stacks/HDP/1.3.2/services/NAGIOS/package/templates/nagios.j2
----------------------------------------------------------------------
diff --git a/ambari-server/src/main/resources/stacks/HDP/1.3.2/services/NAGIOS/package/templates/nagios.j2 b/ambari-server/src/main/resources/stacks/HDP/1.3.2/services/NAGIOS/package/templates/nagios.j2
deleted file mode 100644
index fd270c8..0000000
--- a/ambari-server/src/main/resources/stacks/HDP/1.3.2/services/NAGIOS/package/templates/nagios.j2
+++ /dev/null
@@ -1,165 +0,0 @@
-{#
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements.  See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership.  The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License.  You may obtain a copy of the License at
-#
-#   http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#}
-
-
-#!/bin/sh
-# $Id$
-# Nagios	Startup script for the Nagios monitoring daemon
-#
-# chkconfig:	- 85 15
-# description:	Nagios is a service monitoring system
-# processname: nagios
-# config: /etc/nagios/nagios.cfg
-# pidfile: /var/nagios/nagios.pid
-#
-### BEGIN INIT INFO
-# Provides:		nagios
-# Required-Start:	$local_fs $syslog $network
-# Required-Stop:	$local_fs $syslog $network
-# Short-Description:    start and stop Nagios monitoring server
-# Description:		Nagios is is a service monitoring system 
-### END INIT INFO
-
-#
-#
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements.  See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership.  The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License.  You may obtain a copy of the License at
-#
-#   http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied.  See the License for the
-# specific language governing permissions and limitations
-# under the License.
-#
-#
-#
-
-# Source function library.
-. /etc/rc.d/init.d/functions
-
-prefix="/usr"
-exec_prefix="/usr"
-exec="/usr/sbin/nagios"
-prog="nagios"
-config="/etc/nagios/nagios.cfg"
-pidfile="{{nagios_pid_file}}"
-user="{{nagios_user}}"
-
-[ -e /etc/sysconfig/$prog ] && . /etc/sysconfig/$prog
-
-lockfile=/var/lock/subsys/$prog
-
-start() {
-    [ -x $exec ] || exit 5
-    [ -f $config ] || exit 6
-    echo -n $"Starting $prog: "
-    daemon --user=$user $exec -d $config
-    retval=$?
-    echo
-    [ $retval -eq 0 ] && touch $lockfile
-    return $retval
-}
-
-stop() {
-    echo -n $"Stopping $prog: "
-    killproc -d 10 $exec
-    retval=$?
-    echo
-    [ $retval -eq 0 ] && rm -f $lockfile
-    return $retval
-}
-
-
-restart() {
-    stop
-    start
-}
-
-reload() {
-    echo -n $"Reloading $prog: "
-    killproc $exec -HUP
-    RETVAL=$?
-    echo
-}
-
-force_reload() {
-    restart
-}
-
-check_config() {
-        $nice runuser -s /bin/bash - $user -c "$corelimit >/dev/null 2>&1 ; $exec -v $config > /dev/null 2>&1"
-        RETVAL=$?
-        if [ $RETVAL -ne 0 ] ; then
-                echo -n $"Configuration validation failed"
-                failure
-                echo
-                exit 1
-
-        fi
-}
-
-
-case "$1" in
-    start)
-        status $prog && exit 0
-	check_config
-        $1
-        ;;
-    stop)
-        status $prog|| exit 0
-        $1
-        ;;
-    restart)
-	check_config
-        $1
-        ;;
-    reload)
-        status $prog || exit 7
-	check_config
-        $1
-        ;;
-    force-reload)
-	check_config
-        force_reload
-        ;;
-    status)
-        status $prog
-        ;;
-    condrestart|try-restart)
-        status $prog|| exit 0
-	check_config
-        restart
-        ;;
-    configtest)
-        echo -n  $"Checking config for $prog: "
-        check_config && success
-        echo
-	;;
-    *)
-        echo $"Usage: $0 {start|stop|status|restart|condrestart|try-restart|reload|force-reload|configtest}"
-        exit 2
-esac
-exit $?

http://git-wip-us.apache.org/repos/asf/ambari/blob/e4ededeb/ambari-server/src/main/resources/stacks/HDP/1.3.2/services/NAGIOS/package/templates/resource.cfg.j2
----------------------------------------------------------------------
diff --git a/ambari-server/src/main/resources/stacks/HDP/1.3.2/services/NAGIOS/package/templates/resource.cfg.j2 b/ambari-server/src/main/resources/stacks/HDP/1.3.2/services/NAGIOS/package/templates/resource.cfg.j2
deleted file mode 100644
index 7ea8d61..0000000
--- a/ambari-server/src/main/resources/stacks/HDP/1.3.2/services/NAGIOS/package/templates/resource.cfg.j2
+++ /dev/null
@@ -1,70 +0,0 @@
-{#
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements.  See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership.  The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License.  You may obtain a copy of the License at
-#
-#   http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#}
-
-
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements.  See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership.  The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License.  You may obtain a copy of the License at
-#
-#   http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied.  See the License for the
-# specific language governing permissions and limitations
-# under the License.
-#
-#
-###########################################################################
-#
-# RESOURCE.CFG - Sample Resource File for Nagios 3.2.3
-#
-# Last Modified: 09-10-2003
-#
-# You can define $USERx$ macros in this file, which can in turn be used
-# in command definitions in your host config file(s).  $USERx$ macros are
-# useful for storing sensitive information such as usernames, passwords,
-# etc.  They are also handy for specifying the path to plugins and
-# event handlers - if you decide to move the plugins or event handlers to
-# a different directory in the future, you can just update one or two
-# $USERx$ macros, instead of modifying a lot of command definitions.
-#
-# The CGIs will not attempt to read the contents of resource files, so
-# you can set restrictive permissions (600 or 660) on them.
-#
-# Nagios supports up to 32 $USERx$ macros ($USER1$ through $USER32$)
-#
-# Resource files may also be used to store configuration directives for
-# external data sources like MySQL...
-#
-###########################################################################
-
-# Sets $USER1$ to be the path to the plugins
-$USER1$={{plugins_dir}}
-
-# Sets $USER2$ to be the path to event handlers
-#$USER2$={{eventhandlers_dir}}
-
-# Store some usernames and passwords (hidden from the CGIs)
-#$USER3$=someuser
-#$USER4$=somepassword
\ No newline at end of file

http://git-wip-us.apache.org/repos/asf/ambari/blob/e4ededeb/ambari-server/src/main/resources/stacks/HDP/1.3.2/services/stack_advisor.py
----------------------------------------------------------------------
diff --git a/ambari-server/src/main/resources/stacks/HDP/1.3.2/services/stack_advisor.py b/ambari-server/src/main/resources/stacks/HDP/1.3.2/services/stack_advisor.py
index ca7c1a1..77289f0 100644
--- a/ambari-server/src/main/resources/stacks/HDP/1.3.2/services/stack_advisor.py
+++ b/ambari-server/src/main/resources/stacks/HDP/1.3.2/services/stack_advisor.py
@@ -247,7 +247,7 @@ class HDP132StackAdvisor(DefaultStackAdvisor):
     return ['JOURNALNODE', 'ZKFC', 'GANGLIA_MONITOR']
 
   def getNotPreferableOnServerComponents(self):
-    return ['GANGLIA_SERVER', 'NAGIOS_SERVER']
+    return ['GANGLIA_SERVER']
 
   def getCardinalitiesDict(self):
     return {

http://git-wip-us.apache.org/repos/asf/ambari/blob/e4ededeb/ambari-server/src/main/resources/stacks/HDP/1.3.3/role_command_order.json
----------------------------------------------------------------------
diff --git a/ambari-server/src/main/resources/stacks/HDP/1.3.3/role_command_order.json b/ambari-server/src/main/resources/stacks/HDP/1.3.3/role_command_order.json
index a05324f..372c851 100644
--- a/ambari-server/src/main/resources/stacks/HDP/1.3.3/role_command_order.json
+++ b/ambari-server/src/main/resources/stacks/HDP/1.3.3/role_command_order.json
@@ -3,8 +3,6 @@
   "_comment" : "blockedRole-blockedCommand: [blockerRole1-blockerCommand1, blockerRole2-blockerCommand2, ...]",
   "general_deps" : {
     "_comment" : "dependencies for all cases",
-    "NAGIOS_SERVER-INSTALL" : ["HIVE_CLIENT-INSTALL", "HCAT-INSTALL",
-        "MAPREDUCE_CLIENT-INSTALL", "OOZIE_CLIENT-INSTALL"],
     "HBASE_MASTER-START": ["ZOOKEEPER_SERVER-START"],
     "HBASE_REGIONSERVER-START": ["HBASE_MASTER-START"],
     "OOZIE_SERVER-START": ["JOBTRACKER-START", "TASKTRACKER-START"],
@@ -12,12 +10,6 @@
     "HIVE_METASTORE-START": ["MYSQL_SERVER-START"],
     "HIVE_SERVER-START": ["TASKTRACKER-START", "MYSQL_SERVER-START"],
     "HUE_SERVER-START": ["HIVE_SERVER-START", "HCAT-START", "OOZIE_SERVER-START"],
-    "NAGIOS_SERVER-START": ["HBASE_MASTER-START", "HBASE_REGIONSERVER-START",
-        "GANGLIA_SERVER-START", "GANGLIA_MONITOR-START", "HCAT-START",
-        "HIVE_SERVER-START", "HIVE_METASTORE-START", "HUE_SERVER-START",
-        "JOBTRACKER-START", "TASKTRACKER-START", "ZOOKEEPER_SERVER-START",
-        "MYSQL_SERVER-START", "OOZIE_SERVER-START", "PIG-START", "SQOOP-START",
-        "WEBHCAT_SERVER-START"],
     "MAPREDUCE_SERVICE_CHECK-SERVICE_CHECK": ["JOBTRACKER-START", "TASKTRACKER-START"],
     "OOZIE_SERVICE_CHECK-SERVICE_CHECK": ["OOZIE_SERVER-START"],
     "WEBHCAT_SERVICE_CHECK-SERVICE_CHECK": ["WEBHCAT_SERVER-START"],
@@ -47,8 +39,7 @@
     "WEBHCAT_SERVER-UPGRADE" : ["OOZIE_CLIENT-UPGRADE"],
     "PIG-UPGRADE" : ["WEBHCAT_SERVER-UPGRADE"],
     "SQOOP-UPGRADE" : ["PIG-UPGRADE"],
-    "NAGIOS_SERVER-UPGRADE" : ["SQOOP-UPGRADE"],
-    "GANGLIA_SERVER-UPGRADE" : ["NAGIOS_SERVER-UPGRADE"],
+    "GANGLIA_SERVER-UPGRADE" : ["SQOOP-UPGRADE"],
     "GANGLIA_MONITOR-UPGRADE" : ["GANGLIA_SERVER-UPGRADE"]
   },
   "_comment" : "GLUSTERFS-specific dependencies",
@@ -70,8 +61,6 @@
     "TASKTRACKER-START": ["NAMENODE-START", "DATANODE-START"],
     "HIVE_SERVER-START": ["DATANODE-START"],
     "WEBHCAT_SERVER-START": ["DATANODE-START"],
-    "NAGIOS_SERVER-START": ["NAMENODE-START", "SECONDARY_NAMENODE-START",
-        "DATANODE-START", "RESOURCEMANAGER-START", "NODEMANAGER-START", "HISTORYSERVER-START"],
     "HDFS_SERVICE_CHECK-SERVICE_CHECK": ["NAMENODE-START", "DATANODE-START",
         "SECONDARY_NAMENODE-START"],
     "MAPREDUCE2_SERVICE_CHECK-SERVICE_CHECK": ["NODEMANAGER-START",
@@ -92,7 +81,6 @@
   "namenode_optional_ha": {
     "NAMENODE-START": ["JOURNALNODE-START", "ZOOKEEPER_SERVER-START"],
     "ZKFC-START": ["NAMENODE-START"],
-    "NAGIOS_SERVER-START": ["ZKFC-START", "JOURNALNODE-START"],
     "HDFS_SERVICE_CHECK-SERVICE_CHECK": ["ZKFC-START"]
   },
   "_comment" : "Dependencies that are used in ResourceManager HA cluster",
@@ -100,4 +88,3 @@
     "RESOURCEMANAGER-START": ["ZOOKEEPER_SERVER-START"]
   }
 }
-

http://git-wip-us.apache.org/repos/asf/ambari/blob/e4ededeb/ambari-server/src/main/resources/stacks/HDP/1.3/role_command_order.json
----------------------------------------------------------------------
diff --git a/ambari-server/src/main/resources/stacks/HDP/1.3/role_command_order.json b/ambari-server/src/main/resources/stacks/HDP/1.3/role_command_order.json
index 5a75a8e..f610d79 100644
--- a/ambari-server/src/main/resources/stacks/HDP/1.3/role_command_order.json
+++ b/ambari-server/src/main/resources/stacks/HDP/1.3/role_command_order.json
@@ -3,8 +3,6 @@
   "_comment" : "blockedRole-blockedCommand: [blockerRole1-blockerCommand1, blockerRole2-blockerCommand2, ...]",
   "general_deps" : {
     "_comment" : "dependencies for all cases",
-    "NAGIOS_SERVER-INSTALL" : ["HIVE_CLIENT-INSTALL", "HCAT-INSTALL",
-        "MAPREDUCE_CLIENT-INSTALL", "OOZIE_CLIENT-INSTALL"],
     "HBASE_MASTER-START": ["ZOOKEEPER_SERVER-START"],
     "HBASE_REGIONSERVER-START": ["HBASE_MASTER-START"],
     "OOZIE_SERVER-START": ["JOBTRACKER-START", "TASKTRACKER-START"],
@@ -12,12 +10,6 @@
     "HIVE_METASTORE-START": ["MYSQL_SERVER-START"],
     "HIVE_SERVER-START": ["TASKTRACKER-START", "MYSQL_SERVER-START"],
     "HUE_SERVER-START": ["HIVE_SERVER-START", "HCAT-START", "OOZIE_SERVER-START"],
-    "NAGIOS_SERVER-START": ["HBASE_MASTER-START", "HBASE_REGIONSERVER-START",
-        "GANGLIA_SERVER-START", "GANGLIA_MONITOR-START", "HCAT-START",
-        "HIVE_SERVER-START", "HIVE_METASTORE-START", "HUE_SERVER-START",
-        "JOBTRACKER-START", "TASKTRACKER-START", "ZOOKEEPER_SERVER-START",
-        "MYSQL_SERVER-START", "OOZIE_SERVER-START", "PIG-START", "SQOOP-START",
-        "WEBHCAT_SERVER-START"],
     "MAPREDUCE_SERVICE_CHECK-SERVICE_CHECK": ["JOBTRACKER-START", "TASKTRACKER-START"],
     "OOZIE_SERVICE_CHECK-SERVICE_CHECK": ["OOZIE_SERVER-START"],
     "HBASE_SERVICE_CHECK-SERVICE_CHECK": ["HBASE_MASTER-START", "HBASE_REGIONSERVER-START"],
@@ -45,8 +37,7 @@
     "WEBHCAT_SERVER-UPGRADE" : ["OOZIE_CLIENT-UPGRADE"],
     "PIG-UPGRADE" : ["WEBHCAT_SERVER-UPGRADE"],
     "SQOOP-UPGRADE" : ["PIG-UPGRADE"],
-    "NAGIOS_SERVER-UPGRADE" : ["SQOOP-UPGRADE"],
-    "GANGLIA_SERVER-UPGRADE" : ["NAGIOS_SERVER-UPGRADE"],
+    "GANGLIA_SERVER-UPGRADE" : ["SQOOP-UPGRADE"],
     "GANGLIA_MONITOR-UPGRADE" : ["GANGLIA_SERVER-UPGRADE"]
   },
   "_comment" : "GLUSTERFS-specific dependencies",
@@ -68,8 +59,6 @@
     "TASKTRACKER-START": ["NAMENODE-START", "DATANODE-START"],
     "HIVE_SERVER-START": ["DATANODE-START"],
     "WEBHCAT_SERVER-START": ["DATANODE-START"],
-    "NAGIOS_SERVER-START": ["NAMENODE-START", "SECONDARY_NAMENODE-START",
-        "DATANODE-START", "RESOURCEMANAGER-START", "NODEMANAGER-START", "HISTORYSERVER-START"],
     "HDFS_SERVICE_CHECK-SERVICE_CHECK": ["NAMENODE-START", "DATANODE-START",
         "SECONDARY_NAMENODE-START"],
     "MAPREDUCE2_SERVICE_CHECK-SERVICE_CHECK": ["NODEMANAGER-START",
@@ -90,7 +79,6 @@
   "namenode_optional_ha": {
     "NAMENODE-START": ["JOURNALNODE-START", "ZOOKEEPER_SERVER-START"],
     "ZKFC-START": ["NAMENODE-START"],
-    "NAGIOS_SERVER-START": ["ZKFC-START", "JOURNALNODE-START"],
     "HDFS_SERVICE_CHECK-SERVICE_CHECK": ["ZKFC-START"]
   },
   "_comment" : "Dependencies that are used in ResourceManager HA cluster",
@@ -98,4 +86,3 @@
     "RESOURCEMANAGER-START": ["ZOOKEEPER_SERVER-START"]
   }
 }
-

http://git-wip-us.apache.org/repos/asf/ambari/blob/e4ededeb/ambari-server/src/main/resources/stacks/HDP/2.0.6.GlusterFS/role_command_order.json
----------------------------------------------------------------------
diff --git a/ambari-server/src/main/resources/stacks/HDP/2.0.6.GlusterFS/role_command_order.json b/ambari-server/src/main/resources/stacks/HDP/2.0.6.GlusterFS/role_command_order.json
index 82cbd79..ff6846c 100644
--- a/ambari-server/src/main/resources/stacks/HDP/2.0.6.GlusterFS/role_command_order.json
+++ b/ambari-server/src/main/resources/stacks/HDP/2.0.6.GlusterFS/role_command_order.json
@@ -3,8 +3,6 @@
   "_comment" : "blockedRole-blockedCommand: [blockerRole1-blockerCommand1, blockerRole2-blockerCommand2, ...]",
   "general_deps" : {
     "_comment" : "dependencies for all cases",
-    "NAGIOS_SERVER-INSTALL" : ["HIVE_CLIENT-INSTALL", "HCAT-INSTALL",
-        "MAPREDUCE_CLIENT-INSTALL", "OOZIE_CLIENT-INSTALL"],
     "NIMBUS-START" : ["ZOOKEEPER_SERVER-START"],
     "SUPERVISOR-START" : ["NIMBUS-START"],
     "STORM_UI_SERVER-START" : ["NIMBUS-START"],
@@ -18,12 +16,6 @@
     "HIVE_SERVER-START": ["NODEMANAGER-START", "MYSQL_SERVER-START"],
     "HUE_SERVER-START": ["HIVE_SERVER-START", "HCAT-START", "OOZIE_SERVER-START"],
     "FLUME_HANDLER-START": ["OOZIE_SERVER-START"],
-    "NAGIOS_SERVER-START": ["HBASE_MASTER-START", "HBASE_REGIONSERVER-START",
-        "GANGLIA_SERVER-START", "GANGLIA_MONITOR-START", "HCAT-START",
-        "HIVE_SERVER-START", "HIVE_METASTORE-START", "HUE_SERVER-START",
-        "RESOURCEMANAGER-START", "NODEMANAGER-START", "ZOOKEEPER_SERVER-START",
-        "MYSQL_SERVER-START", "OOZIE_SERVER-START", "PIG-START", "SQOOP-START",
-        "WEBHCAT_SERVER-START", "FLUME_HANDLER-START"],
     "MAPREDUCE_SERVICE_CHECK-SERVICE_CHECK": ["RESOURCEMANAGER-START", "NODEMANAGER-START"],
     "OOZIE_SERVICE_CHECK-SERVICE_CHECK": ["OOZIE_SERVER-START"],
     "HBASE_SERVICE_CHECK-SERVICE_CHECK": ["HBASE_MASTER-START", "HBASE_REGIONSERVER-START"],
@@ -57,8 +49,6 @@
     "FALCON_SERVICE_CHECK-SERVICE_CHECK": ["FALCON_SERVER-START"],
     "HIVE_SERVER-START": ["DATANODE-START"],
     "WEBHCAT_SERVER-START": ["DATANODE-START"],
-    "NAGIOS_SERVER-START": ["NAMENODE-START", "SECONDARY_NAMENODE-START",
-        "DATANODE-START", "RESOURCEMANAGER-START", "NODEMANAGER-START", "HISTORYSERVER-START"],
     "HDFS_SERVICE_CHECK-SERVICE_CHECK": ["NAMENODE-START", "DATANODE-START",
         "SECONDARY_NAMENODE-START"],
     "MAPREDUCE2_SERVICE_CHECK-SERVICE_CHECK": ["NODEMANAGER-START",
@@ -74,12 +64,10 @@
   "_comment" : "Dependencies that are used in HA NameNode cluster",
   "namenode_optional_ha": {
     "NAMENODE-START": ["ZKFC-START", "JOURNALNODE-START", "ZOOKEEPER_SERVER-START"],
-    "ZKFC-START": ["ZOOKEEPER_SERVER-START"],
-    "NAGIOS_SERVER-START": ["ZKFC-START", "JOURNALNODE-START"]
+    "ZKFC-START": ["ZOOKEEPER_SERVER-START"]
   },
   "_comment" : "Dependencies that are used in ResourceManager HA cluster",
   "resourcemanager_optional_ha" : {
     "RESOURCEMANAGER-START": ["ZOOKEEPER_SERVER-START"]
   }
 }
-

http://git-wip-us.apache.org/repos/asf/ambari/blob/e4ededeb/ambari-server/src/main/resources/stacks/HDP/2.0.6/hooks/before-ANY/scripts/params.py
----------------------------------------------------------------------
diff --git a/ambari-server/src/main/resources/stacks/HDP/2.0.6/hooks/before-ANY/scripts/params.py b/ambari-server/src/main/resources/stacks/HDP/2.0.6/hooks/before-ANY/scripts/params.py
index 67c08ac..e657002 100644
--- a/ambari-server/src/main/resources/stacks/HDP/2.0.6/hooks/before-ANY/scripts/params.py
+++ b/ambari-server/src/main/resources/stacks/HDP/2.0.6/hooks/before-ANY/scripts/params.py
@@ -129,7 +129,6 @@ hadoop_env_sh_template = config['configurations']['hadoop-env']['content']
 
 #users and groups
 hbase_user = config['configurations']['hbase-env']['hbase_user']
-nagios_user = config['configurations']['nagios-env']['nagios_user']
 smoke_user =  config['configurations']['cluster-env']['smokeuser']
 gmetad_user = config['configurations']['ganglia-env']["gmetad_user"]
 gmond_user = config['configurations']['ganglia-env']["gmond_user"]
@@ -138,14 +137,12 @@ oozie_user = config['configurations']['oozie-env']["oozie_user"]
 
 user_group = config['configurations']['cluster-env']['user_group']
 
-hagios_server_hosts = default("/clusterHostInfo/nagios_server_host", [])
 ganglia_server_hosts = default("/clusterHostInfo/ganglia_server_host", [])
 namenode_host = default("/clusterHostInfo/namenode_host", [])
 hbase_master_hosts = default("/clusterHostInfo/hbase_master_hosts", [])
 oozie_servers = default("/clusterHostInfo/oozie_server", [])
 
 has_namenode = not len(namenode_host) == 0
-has_nagios = not len(hagios_server_hosts) == 0
 has_ganglia_server = not len(ganglia_server_hosts) == 0
 has_tez = 'tez-site' in config['configurations']
 has_hbase_masters = not len(hbase_master_hosts) == 0
@@ -154,7 +151,6 @@ has_oozie_server = not len(oozie_servers) == 0
 hbase_tmp_dir = config['configurations']['hbase-site']['hbase.tmp.dir']
 
 proxyuser_group = default("/configurations/hadoop-env/proxyuser_group","users")
-nagios_group = config['configurations']['nagios-env']['nagios_group']
 
 ignore_groupsusers_create = default("/configurations/cluster-env/ignore_groupsusers_create", False)
 
@@ -176,8 +172,6 @@ if has_oozie_server:
   user_to_groups_dict[oozie_user] = [proxyuser_group]
 
 user_to_gid_dict = collections.defaultdict(lambda:user_group)
-if has_nagios:
-  user_to_gid_dict[nagios_user] = nagios_group
 
 user_list = json.loads(config['hostLevelParams']['user_list'])
 group_list = json.loads(config['hostLevelParams']['group_list'])

http://git-wip-us.apache.org/repos/asf/ambari/blob/e4ededeb/ambari-server/src/main/resources/stacks/HDP/2.0.6/hooks/before-INSTALL/scripts/params.py
----------------------------------------------------------------------
diff --git a/ambari-server/src/main/resources/stacks/HDP/2.0.6/hooks/before-INSTALL/scripts/params.py b/ambari-server/src/main/resources/stacks/HDP/2.0.6/hooks/before-INSTALL/scripts/params.py
index 4290506..0e4f906 100644
--- a/ambari-server/src/main/resources/stacks/HDP/2.0.6/hooks/before-INSTALL/scripts/params.py
+++ b/ambari-server/src/main/resources/stacks/HDP/2.0.6/hooks/before-INSTALL/scripts/params.py
@@ -32,7 +32,6 @@ stack_is_hdp22_or_further = hdp_stack_version != "" and compare_versions(hdp_sta
 
 #users and groups
 hbase_user = config['configurations']['hbase-env']['hbase_user']
-nagios_user = config['configurations']['nagios-env']['nagios_user']
 smoke_user =  config['configurations']['cluster-env']['smokeuser']
 gmetad_user = config['configurations']['ganglia-env']["gmetad_user"]
 gmond_user = config['configurations']['ganglia-env']["gmond_user"]
@@ -40,7 +39,6 @@ tez_user = config['configurations']['tez-env']["tez_user"]
 
 user_group = config['configurations']['cluster-env']['user_group']
 proxyuser_group = default("/configurations/hadoop-env/proxyuser_group","users")
-nagios_group = config['configurations']['nagios-env']['nagios_group']
 
 hdfs_log_dir_prefix = config['configurations']['hadoop-env']['hdfs_log_dir_prefix']
 
@@ -49,7 +47,6 @@ hostname = config["hostname"]
 ambari_server_hostname = config['clusterHostInfo']['ambari_server_host'][0]
 rm_host = default("/clusterHostInfo/rm_host", [])
 slave_hosts = default("/clusterHostInfo/slave_hosts", [])
-hagios_server_hosts = default("/clusterHostInfo/nagios_server_host", [])
 oozie_servers = default("/clusterHostInfo/oozie_server", [])
 hcat_server_hosts = default("/clusterHostInfo/webhcat_server_host", [])
 hive_server_host =  default("/clusterHostInfo/hive_server_host", [])
@@ -67,7 +64,6 @@ has_namenode = not len(namenode_host) == 0
 has_hs = not len(hs_host) == 0
 has_resourcemanager = not len(rm_host) == 0
 has_slaves = not len(slave_hosts) == 0
-has_nagios = not len(hagios_server_hosts) == 0
 has_oozie_server = not len(oozie_servers)  == 0
 has_hcat_server_host = not len(hcat_server_hosts)  == 0
 has_hive_server_host = not len(hive_server_host)  == 0
@@ -117,8 +113,6 @@ if has_tez:
   user_to_groups_dict[tez_user] = [proxyuser_group]
 
 user_to_gid_dict = collections.defaultdict(lambda:user_group)
-if has_nagios:
-  user_to_gid_dict[nagios_user] = nagios_group
 
 user_list = json.loads(config['hostLevelParams']['user_list'])
 group_list = json.loads(config['hostLevelParams']['group_list'])

http://git-wip-us.apache.org/repos/asf/ambari/blob/e4ededeb/ambari-server/src/main/resources/stacks/HDP/2.0.6/hooks/before-START/scripts/params.py
----------------------------------------------------------------------
diff --git a/ambari-server/src/main/resources/stacks/HDP/2.0.6/hooks/before-START/scripts/params.py b/ambari-server/src/main/resources/stacks/HDP/2.0.6/hooks/before-START/scripts/params.py
index 5bbd36f..97403e8 100644
--- a/ambari-server/src/main/resources/stacks/HDP/2.0.6/hooks/before-START/scripts/params.py
+++ b/ambari-server/src/main/resources/stacks/HDP/2.0.6/hooks/before-START/scripts/params.py
@@ -59,7 +59,6 @@ hostname = config["hostname"]
 ambari_server_hostname = config['clusterHostInfo']['ambari_server_host'][0]
 rm_host = default("/clusterHostInfo/rm_host", [])
 slave_hosts = default("/clusterHostInfo/slave_hosts", [])
-hagios_server_hosts = default("/clusterHostInfo/nagios_server_host", [])
 oozie_servers = default("/clusterHostInfo/oozie_server", [])
 hcat_server_hosts = default("/clusterHostInfo/webhcat_server_host", [])
 hive_server_host =  default("/clusterHostInfo/hive_server_host", [])
@@ -73,7 +72,6 @@ ganglia_server_hosts = default("/clusterHostInfo/ganglia_server_host", [])
 has_namenode = not len(namenode_host) == 0
 has_resourcemanager = not len(rm_host) == 0
 has_slaves = not len(slave_hosts) == 0
-has_nagios = not len(hagios_server_hosts) == 0
 has_oozie_server = not len(oozie_servers)  == 0
 has_hcat_server_host = not len(hcat_server_hosts)  == 0
 has_hive_server_host = not len(hive_server_host)  == 0

http://git-wip-us.apache.org/repos/asf/ambari/blob/e4ededeb/ambari-server/src/main/resources/stacks/HDP/2.0.6/role_command_order.json
----------------------------------------------------------------------
diff --git a/ambari-server/src/main/resources/stacks/HDP/2.0.6/role_command_order.json b/ambari-server/src/main/resources/stacks/HDP/2.0.6/role_command_order.json
index a92fa1d..d40d440 100644
--- a/ambari-server/src/main/resources/stacks/HDP/2.0.6/role_command_order.json
+++ b/ambari-server/src/main/resources/stacks/HDP/2.0.6/role_command_order.json
@@ -3,8 +3,6 @@
   "_comment" : "blockedRole-blockedCommand: [blockerRole1-blockerCommand1, blockerRole2-blockerCommand2, ...]",
   "general_deps" : {
     "_comment" : "dependencies for all cases",
-    "NAGIOS_SERVER-INSTALL" : ["HIVE_CLIENT-INSTALL", "HCAT-INSTALL",
-        "MAPREDUCE_CLIENT-INSTALL", "OOZIE_CLIENT-INSTALL"],
     "HBASE_MASTER-START": ["ZOOKEEPER_SERVER-START"],
     "HBASE_REGIONSERVER-START": ["HBASE_MASTER-START"],
     "OOZIE_SERVER-START": ["NODEMANAGER-START", "RESOURCEMANAGER-START"],
@@ -13,12 +11,6 @@
     "HIVE_SERVER-START": ["NODEMANAGER-START", "MYSQL_SERVER-START"],
     "HUE_SERVER-START": ["HIVE_SERVER-START", "HCAT-START", "OOZIE_SERVER-START"],
     "FLUME_HANDLER-START": ["OOZIE_SERVER-START"],
-    "NAGIOS_SERVER-START": ["HBASE_MASTER-START", "HBASE_REGIONSERVER-START",
-        "GANGLIA_SERVER-START", "GANGLIA_MONITOR-START", "HCAT-START",
-        "HIVE_SERVER-START", "HIVE_METASTORE-START", "HUE_SERVER-START",
-        "ZOOKEEPER_SERVER-START", "NODEMANAGER-START", "RESOURCEMANAGER-START",
-        "MYSQL_SERVER-START", "OOZIE_SERVER-START", "PIG-START", "SQOOP-START",
-        "WEBHCAT_SERVER-START", "FLUME_HANDLER-START"],
     "MAPREDUCE_SERVICE_CHECK-SERVICE_CHECK": ["NODEMANAGER-START", "RESOURCEMANAGER-START"],
     "OOZIE_SERVICE_CHECK-SERVICE_CHECK": ["OOZIE_SERVER-START", "MAPREDUCE2_SERVICE_CHECK-SERVICE_CHECK"],
     "HBASE_SERVICE_CHECK-SERVICE_CHECK": ["HBASE_MASTER-START", "HBASE_REGIONSERVER-START"],
@@ -44,8 +36,6 @@
     "HBASE_MASTER-START": ["NAMENODE-START", "DATANODE-START"],
     "HIVE_SERVER-START": ["DATANODE-START"],
     "WEBHCAT_SERVER-START": ["DATANODE-START"],
-    "NAGIOS_SERVER-START": ["NAMENODE-START", "SECONDARY_NAMENODE-START",
-        "DATANODE-START", "RESOURCEMANAGER-START", "NODEMANAGER-START", "HISTORYSERVER-START"],
     "HDFS_SERVICE_CHECK-SERVICE_CHECK": ["NAMENODE-START", "DATANODE-START",
         "SECONDARY_NAMENODE-START"],
     "MAPREDUCE2_SERVICE_CHECK-SERVICE_CHECK": ["NODEMANAGER-START",
@@ -61,12 +51,10 @@
   "_comment" : "Dependencies that are used in HA NameNode cluster",
   "namenode_optional_ha": {
     "NAMENODE-START": ["ZKFC-START", "JOURNALNODE-START", "ZOOKEEPER_SERVER-START"],
-    "ZKFC-START": ["ZOOKEEPER_SERVER-START"],
-    "NAGIOS_SERVER-START": ["ZKFC-START", "JOURNALNODE-START"]
+    "ZKFC-START": ["ZOOKEEPER_SERVER-START"]
   },
   "_comment" : "Dependencies that are used in ResourceManager HA cluster",
   "resourcemanager_optional_ha" : {
     "RESOURCEMANAGER-START": ["ZOOKEEPER_SERVER-START"]
   }
 }
-

http://git-wip-us.apache.org/repos/asf/ambari/blob/e4ededeb/ambari-server/src/main/resources/stacks/HDP/2.0.6/services/GANGLIA/package/files/gmondLib.sh
----------------------------------------------------------------------
diff --git a/ambari-server/src/main/resources/stacks/HDP/2.0.6/services/GANGLIA/package/files/gmondLib.sh b/ambari-server/src/main/resources/stacks/HDP/2.0.6/services/GANGLIA/package/files/gmondLib.sh
index e7ea83f..d06afd8 100644
--- a/ambari-server/src/main/resources/stacks/HDP/2.0.6/services/GANGLIA/package/files/gmondLib.sh
+++ b/ambari-server/src/main/resources/stacks/HDP/2.0.6/services/GANGLIA/package/files/gmondLib.sh
@@ -160,7 +160,6 @@ host {
  *
  * At the very least, every gmond must expose its XML state to 
  * queriers from localhost.
- * Also we use this port for Nagios monitoring
  */
 tcp_accept_channel {
   bind = 0.0.0.0

http://git-wip-us.apache.org/repos/asf/ambari/blob/e4ededeb/ambari-server/src/main/resources/stacks/HDP/2.0.6/services/HDFS/package/scripts/params.py
----------------------------------------------------------------------
diff --git a/ambari-server/src/main/resources/stacks/HDP/2.0.6/services/HDFS/package/scripts/params.py b/ambari-server/src/main/resources/stacks/HDP/2.0.6/services/HDFS/package/scripts/params.py
index 6d35468..49ac408 100644
--- a/ambari-server/src/main/resources/stacks/HDP/2.0.6/services/HDFS/package/scripts/params.py
+++ b/ambari-server/src/main/resources/stacks/HDP/2.0.6/services/HDFS/package/scripts/params.py
@@ -96,7 +96,6 @@ kinit_path_local = functions.get_kinit_path(["/usr/bin", "/usr/kerberos/bin", "/
 hostname = config["hostname"]
 rm_host = default("/clusterHostInfo/rm_host", [])
 slave_hosts = default("/clusterHostInfo/slave_hosts", [])
-hagios_server_hosts = default("/clusterHostInfo/nagios_server_host", [])
 oozie_servers = default("/clusterHostInfo/oozie_server", [])
 hcat_server_hosts = default("/clusterHostInfo/webhcat_server_host", [])
 hive_server_host =  default("/clusterHostInfo/hive_server_host", [])
@@ -117,7 +116,6 @@ has_resourcemanager = not len(rm_host) == 0
 has_histroryserver = not len(hs_host) == 0
 has_hbase_masters = not len(hbase_master_hosts) == 0
 has_slaves = not len(slave_hosts) == 0
-has_nagios = not len(hagios_server_hosts) == 0
 has_oozie_server = not len(oozie_servers)  == 0
 has_hcat_server_host = not len(hcat_server_hosts)  == 0
 has_hive_server_host = not len(hive_server_host)  == 0
@@ -139,7 +137,6 @@ if has_ganglia_server:
 #users and groups
 yarn_user = config['configurations']['yarn-env']['yarn_user']
 hbase_user = config['configurations']['hbase-env']['hbase_user']
-nagios_user = config['configurations']['nagios-env']['nagios_user']
 oozie_user = config['configurations']['oozie-env']['oozie_user']
 webhcat_user = config['configurations']['hive-env']['hcat_user']
 hcat_user = config['configurations']['hive-env']['hcat_user']
@@ -150,7 +147,6 @@ hdfs_principal_name = config['configurations']['hadoop-env']['hdfs_principal_nam
 
 user_group = config['configurations']['cluster-env']['user_group']
 proxyuser_group =  config['configurations']['hadoop-env']['proxyuser_group']
-nagios_group = config['configurations']['nagios-env']['nagios_group']
 
 #hadoop params
 hdfs_log_dir_prefix = config['configurations']['hadoop-env']['hdfs_log_dir_prefix']

http://git-wip-us.apache.org/repos/asf/ambari/blob/e4ededeb/ambari-server/src/main/resources/stacks/HDP/2.0.6/services/NAGIOS/configuration/nagios-env.xml
----------------------------------------------------------------------
diff --git a/ambari-server/src/main/resources/stacks/HDP/2.0.6/services/NAGIOS/configuration/nagios-env.xml b/ambari-server/src/main/resources/stacks/HDP/2.0.6/services/NAGIOS/configuration/nagios-env.xml
deleted file mode 100644
index fad8374..0000000
--- a/ambari-server/src/main/resources/stacks/HDP/2.0.6/services/NAGIOS/configuration/nagios-env.xml
+++ /dev/null
@@ -1,53 +0,0 @@
-<?xml version="1.0"?>
-<?xml-stylesheet type="text/xsl" href="configuration.xsl"?>
-<!--
-/**
- * Licensed to the Apache Software Foundation (ASF) under one
- * or more contributor license agreements.  See the NOTICE file
- * distributed with this work for additional information
- * regarding copyright ownership.  The ASF licenses this file
- * to you under the Apache License, Version 2.0 (the
- * "License"); you may not use this file except in compliance
- * with the License.  You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
--->
-
-<configuration>
-  <property>
-    <name>nagios_user</name>
-    <value>nagios</value>
-    <property-type>USER</property-type>
-    <description>Nagios Username.</description>
-  </property>
-  <property>
-    <name>nagios_group</name>
-    <value>nagios</value>
-    <property-type>GROUP</property-type>
-    <description>Nagios Group.</description>
-  </property>
-  <property>
-    <name>nagios_web_login</name>
-    <value>nagiosadmin</value>
-    <description>Nagios web user.</description>
-  </property>
-  <property require-input = "true">
-    <name>nagios_web_password</name>
-    <value></value>
-    <property-type>PASSWORD</property-type>
-    <description>Nagios Admin Password.</description>
-  </property>
-  <property require-input = "true">
-    <name>nagios_contact</name>
-    <value></value>
-    <description>Hadoop Admin Email.</description>
-  </property>
-
-</configuration>


Mime
View raw message