activemq-users mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Luca Capra <luca.ca...@gmail.com>
Subject Re: Artemis as multiprotocol broker
Date Thu, 26 May 2016 09:18:58 GMT
Ok, I will double check on the client side.


If you have the time, here the test case

The nodejs client code
https://gist.github.com/muka/b6374610618978948f39d83e5248ff7e

The broker implementation (raptor-broker) is here (branch artemis)

https://github.com/muka/raptor/tree/artemis

To run it should just require to mvn install and run the mainClass. It
requires artemis modules of 1.3-SNAPSHOT in the local repository.. I'm
pretty sure you have them already :)

It tries to load configurations (avail in repository ./config) from
/etc/raptor or from system property -DconfigDir=<path>

Thank you for the precious help!

Regards
Luca


2016-05-26 10:42 GMT+02:00 Martyn Taylor <mtaylor@redhat.com>:

> Hi Luca,
>
> Only 3.1.1 is supported in Artemis.  We've not tested against older
> versions.  Could you ensure you are setting the version properly in your
> client.
>
> Error processing control packet usually means the client is doing something
> wrong.  If you send me your test case / reproducer, I will take a look.
>
> Thanks
> Martyn
>
> On Thu, May 26, 2016 at 9:06 AM, Luca Capra <luca.capra@gmail.com> wrote:
>
> > Hi Martyn,
> > thank you for your feedback!
> >
> > I had in fact two different acceptor on my broker.xml. I'm now using just
> > one now. I've also moved to latest master 1.3-SNAPSHOT from git
> >
> > I noticed I get this exception now on connection via mqtt
> >
> > WARN: Error processing Control Packet, Disconnecting Client2
> >
> > From the debugger I can see it is an ArrayOutOfBoundException which
> happens
> > somewhere around ctx.flush() in MqttProtocolHandler.sendConnack
> >
> > The client is mqttjs a nodejs based module implementing 3 -> 3.1.1 mqtt
> > version
> >
> > I'm using a custom SecurityManager, but should not be at the cause of
> such
> > issue
> >
> > Need to investigate better
> >
> > Best
> > Luca
> >
> > 2016-05-25 21:40 GMT+02:00 Martyn Taylor <mtaylor@redhat.com>:
> >
> > > Hi Luca,
> > >
> > > You don't need any specific configuration to do this.  You can just set
> > up
> > > a MQTT Client and a STOMP client and start sending/receiving from the
> > same
> > > address.
> > >
> > > There are a couple of issues with Artemis versions <=1.2.0.  I've fixed
> > > these issues on master and will be doing a 1.3.0 release very soon, it
> > > should be available in the next week or so, your best bet is to wait
> for
> > > this.
> > >
> > > I've also added a simple test to that shows this working.  See:
> > >
> > >
> >
> https://github.com/apache/activemq-artemis/pull/543/commits/62d284d7765218ced2d0f441cf26ffaaaf3c26f2
> > >
> > > Thanks
> > > Martyn
> > >
> > >
> > > On Wed, May 25, 2016 at 3:58 PM, Luca Capra <luca.capra@gmail.com>
> > wrote:
> > >
> > > > Hi all,
> > > > on a project I'm working on I've switched from Apollo to Artemis.
> > > >
> > > > I'm running Artemis as an embed server and would like to have
> > > > inter-protocol communication between stomp and mqtt.
> > > >
> > > > What I'm missing is if this can be done from configuration or
> creating
> > an
> > > > mqtt and stomp client each one to deliver messages the other one.
> > > >
> > > > Thank you
> > > > Luca
> > > >
> > >
> >
>

Mime
  • Unnamed multipart/alternative (inline, None, 0 bytes)
View raw message