activemq-dev mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Martyn Taylor <mtay...@redhat.com>
Subject Re: Thoughts on refactoring the ActiveMQ website
Date Fri, 16 Mar 2018 09:52:52 GMT
Bruce, All

We organised a webex discussion on the dev list[1] where we discussed
Michael's proposal and created a bunch of JIRA[2] that we think are needed
in order to move forward with the proposal.  Unfortunately only a handful
of people attended.  There is concern that a lot of work will be put into
building a new site based on Michael's proposal only for it to get -1 at
the last minute.  For this reason, can I suggest that people take some time
to look into what has been done already by checking out the git repo as
Bruce suggested, or we schedule another webex session where Michael can
talk about his proposal.  We can then take a vote as to whether or not this
is an approach we want to move forward with and what the requirements are
to go live.

Thanks

[1] http://activemq.2283324.n4.nabble.com/Website-Discussion-td4737173.html
[2] https://issues.apache.org/jira/browse/AMQ-6912



On Fri, Mar 16, 2018 at 2:29 AM, Bruce Snyder <bruce.snyder@gmail.com>
wrote:

> Everyone should take a look at the gitbook that Mike put together. It's a
> great first example.
>
> https://github.com/apache/activemq-web/pull/3
>
> Please take 10 minutes to clone the repo, switch to the branch, install
> gitbook, run gitbook and peruse the docs.
>
> Bruce
>
> On Wed, Feb 7, 2018 at 10:11 AM, Bruce Snyder <bruce.snyder@gmail.com>
> wrote:
>
> > I'm sorry about the long delays in getting the official export from
> > Confluence, but it took this long to get some resolution on the issue.
> >
> > I now have a full HTML export from Confluence with the exception of the
> > Navigation page. You can grab the zip file of the HTML at the following
> URL:
> >
> > https://drive.google.com/file/d/1qoTC9KMw8oIzGWwBW1X-
> > oDtZxt8mFZlX/view?usp=sharing
> >
> > Bruce
> >
> > On Wed, Feb 7, 2018 at 10:06 AM, Bruce Snyder <bruce.snyder@gmail.com>
> > wrote:
> >
> >> +1
> >>
> >> Bruce
> >>
> >> On Sat, Feb 3, 2018 at 10:30 AM, Michael André Pearce <
> >> michael.andre.pearce@me.com> wrote:
> >>
> >>> Hi All,
> >>>
> >>> It’s been a bit quiet on the front of this effort.
> >>>
> >>> I’d like to bump this a bit to get some feedback on the current
> >>> examples, and try agree a plan going forwards and spread the work.
> >>>
> >>> I was speaking with Martyn the other week and we think maybe a brief
> >>> webex to demo what’s been done so far and then discuss.
> >>> Martyn’s offered he can host this using his bluejeans account (thanks)
> >>>
> >>> We are thinking of organising this for the week of 19th Feb.
> >>>
> >>> Any specific people who want to be involved can or cannot make? If not
> >>> I’ll sync up with Martyn to agree and then post a time and date.
> >>>
> >>> Cheers
> >>> Mike
> >>>
> >>>
> >>>
> >>> Sent from my iPhone
> >>>
> >>> > On 20 Dec 2017, at 01:26, Michael André Pearce <
> >>> michael.andre.pearce@me.com> wrote:
> >>> >
> >>> > Just FYI have sent a PR with a link to my branch of this export now
> in
> >>> a GitBook form still needs a lot of TLC but have tried to get a large
> bulk
> >>> done. To provide some skeleton for 5.x documents.
> >>> >
> >>> >
> >>> > Sent from my iPhone
> >>> >
> >>> >> On 18 Dec 2017, at 20:26, Michael André Pearce <
> >>> michael.andre.pearce@me.com> wrote:
> >>> >>
> >>> >> Yeah, unfortunately the tool i found wanted just html it blew up
> when
> >>> trying to use modified.
> >>> >>
> >>> >> Like wise there was a couple of pages it couldn’t convert due
to a
> >>> css file on import issue but this wasn’t that many.
> >>> >>
> >>> >> Sent from my iPhone
> >>> >>
> >>> >>> On 18 Dec 2017, at 19:15, Bruce Snyder <bruce.snyder@gmail.com>
> >>> wrote:
> >>> >>>
> >>> >>> Nice job, based on my spot check of a handful of files, it
looks
> much
> >>> >>> better. But we will still need to manually fix all the valid
> tables.
> >>> >>>
> >>> >>> Have you had a chance to look at the other branches that Dan
Kulp
> >>> provided?
> >>> >>>
> >>> >>> Bruce
> >>> >>>
> >>> >>> On Mon, Dec 18, 2017 at 10:59 AM, Michael André Pearce <
> >>> >>> michael.andre.pearce@me.com> wrote:
> >>> >>>
> >>> >>>> I’ve had some luck auto generating MD files.
> >>> >>>>
> >>> >>>> Needs some cleanup which probably the worst can be bash
scripted.
> >>> >>>>
> >>> >>>> Have sent a PR back to the activemq-web on github for others
to
> see.
> >>> >>>>
> >>> >>>> Mike
> >>> >>>>
> >>> >>>> Sent from my iPhone
> >>> >>>>
> >>> >>>>> On 14 Dec 2017, at 16:31, Bruce Snyder <bruce.snyder@gmail.com>
> >>> wrote:
> >>> >>>>>
> >>> >>>>> Thanks, Dan. So far I only see the body.storage branch
(the
> others
> >>> should
> >>> >>>>> propagate in time). But I see that it's already more
> comprehensive
> >>> than
> >>> >>>> the
> >>> >>>>> HTML that I pushed because it contains all the directories.
We
> >>> should
> >>> >>>>> probably wipe out the master branch and choose one
of yours as
> the
> >>> new
> >>> >>>>> master branch.
> >>> >>>>>
> >>> >>>>> Bruce
> >>> >>>>>
> >>> >>>>>> On Thu, Dec 14, 2017 at 7:56 AM, Daniel Kulp <dkulp@apache.org>
> >>> wrote:
> >>> >>>>>>
> >>> >>>>>>
> >>> >>>>>> I hacked the Confluence exporter a bit to grab
the page content
> in
> >>> >>>>>> different formats so we can see if one is easier
to migrate or
> >>> >>>> similar.   I
> >>> >>>>>> just pushed 3 new branches to this repo:
> >>> >>>>>>
> >>> >>>>>> body.only - this is basically the same HTML, but
with all the
> >>> “wrapper”
> >>> >>>>>> stuff removed.   Just the HTML of the body content.
  So no
> >>> navigation
> >>> >>>> or
> >>> >>>>>> header/footer, etc…
> >>> >>>>>>
> >>> >>>>>> body.storage - this is the raw storage format of
the data from
> >>> >>>>>> confluence.   Things like code snippets are in
storage format
> >>> >>>>>> (<structured-macro name=“code” …>),
etc.
> >>> >>>>>>
> >>> >>>>>> body.view - confluence has a “body.view” mode
that is between
> the
> >>> >>>>>> “storage” format and not really the exported
HTML.     The
> >>> structured
> >>> >>>>>> macros are expanded a bit (<script class=“brush:
java”…), but
> not
> >>> >>>> really in
> >>> >>>>>> final HTML form either.
> >>> >>>>>>
> >>> >>>>>>
> >>> >>>>>> Anyway, if interested in converting content, one
of the above
> >>> might be a
> >>> >>>>>> better starting point.
> >>> >>>>>>
> >>> >>>>>>
> >>> >>>>>> Dan
> >>> >>>>>>
> >>> >>>>>>
> >>> >>>>>>
> >>> >>>>>>
> >>> >>>>>>
> >>> >>>>>>
> >>> >>>>>>> On Dec 13, 2017, at 4:49 PM, Bruce Snyder <
> >>> bruce.snyder@gmail.com>
> >>> >>>>>> wrote:
> >>> >>>>>>>
> >>> >>>>>>> The HTML is available in the repo now. This
HTML is just what I
> >>> grabbed
> >>> >>>>>>> from the public directory. Even if it's not
comprehensive, it's
> >>> good
> >>> >>>>>> enough
> >>> >>>>>>> for hacking around to figure out what we'd
like to do.
> >>> >>>>>>>
> >>> >>>>>>> In the meantime, I'm still working with ASF
Infra to figure out
> >>> why the
> >>> >>>>>>> Confluence export is failing.
> >>> >>>>>>>
> >>> >>>>>>> Bruce
> >>> >>>>>>>
> >>> >>>>>>> On Wed, Dec 13, 2017 at 12:51 PM, Bruce Snyder
<
> >>> bruce.snyder@gmail.com
> >>> >>>>>
> >>> >>>>>>> wrote:
> >>> >>>>>>>
> >>> >>>>>>>> Yep, that is correct, Dan:
> >>> >>>>>>>>
> >>> >>>>>>>> https://git-wip-us.apache.org/repos/asf/activemq-web.git
> >>> >>>>>>>>
> >>> >>>>>>>> I pushed my changes to the repo. Now they
just need to
> >>> propagate to
> >>> >>>> the
> >>> >>>>>>>> Github web UI.
> >>> >>>>>>>>
> >>> >>>>>>>> Bruce
> >>> >>>>>>>>
> >>> >>>>>>>>> On Wed, Dec 13, 2017 at 11:28 AM, Daniel
Kulp <
> >>> dkulp@apache.org>
> >>> >>>> wrote:
> >>> >>>>>>>>>
> >>> >>>>>>>>>
> >>> >>>>>>>>> Isn’t the push address supposed to
be:
> >>> >>>>>>>>>
> >>> >>>>>>>>> https://git-wip-us.apache.org/repos/asf/activemq-web.git
> >>> >>>>>>>>>
> >>> >>>>>>>>>
> >>> >>>>>>>>> Dan
> >>> >>>>>>>>>
> >>> >>>>>>>>>
> >>> >>>>>>>>>
> >>> >>>>>>>>>> On Dec 13, 2017, at 1:15 PM, Bruce
Snyder <
> >>> bruce.snyder@gmail.com>
> >>> >>>>>>>>> wrote:
> >>> >>>>>>>>>>
> >>> >>>>>>>>>> Thank you for the suggestion, but
it looks like I do not
> have
> >>> >>>>>>>>> permissions
> >>> >>>>>>>>>> either. I will contact ASF Infra
for assistance.
> >>> >>>>>>>>>>
> >>> >>>>>>>>>> Bruce
> >>> >>>>>>>>>>
> >>> >>>>>>>>>> On Wed, Dec 13, 2017 at 2:41 AM,
Martyn Taylor <
> >>> mtaylor@redhat.com>
> >>> >>>>>>>>> wrote:
> >>> >>>>>>>>>>
> >>> >>>>>>>>>>> On Wed, Dec 13, 2017 at 4:00
AM, Bruce Snyder <
> >>> >>>>>> bruce.snyder@gmail.com>
> >>> >>>>>>>>>>> wrote:
> >>> >>>>>>>>>>>
> >>> >>>>>>>>>>>> I had the following empty
git repo created to hold the
> HTML
> >>> from
> >>> >>>> the
> >>> >>>>>>>>>>>> current website:
> >>> >>>>>>>>>>>>
> >>> >>>>>>>>>>>> https://github.com/apache/activemq-web
> >>> >>>>>>>>>>>>
> >>> >>>>>>>>>>>> However, I have a conundrum
-- content cannot be pushed
> >>> directly
> >>> >>>> to
> >>> >>>>>> a
> >>> >>>>>>>>>>>> Github ASF repo. Content
can only be added via pull
> request
> >>> but
> >>> >>>>>> Github
> >>> >>>>>>>>>>> does
> >>> >>>>>>>>>>>> not allow a pull request
on an empty repo.
> >>> >>>>>>>>>>>>
> >>> >>>>>>>>>>> Bruce, have you tried pushing
directly to the ASF repo.
> i.e.
> >>> >>>> git://
> >>> >>>>>>>>>>> git.apache.org/activemq-web.git
> >>> >>>>>>>>>>>
> >>> >>>>>>>>>>> This is the workflow we currently
use, we push directly to
> >>> the ASF
> >>> >>>>>>>>> repo.
> >>> >>>>>>>>>>> PRs are really only used for
review and discussion.  I
> tried
> >>> to
> >>> >>>> push
> >>> >>>>>>>>>>> directly this morning but looks
like I don't have write
> >>> >>>> permissions.
> >>> >>>>>>>>>>>
> >>> >>>>>>>>>>>>
> >>> >>>>>>>>>>>> Any ideas on how to get
the HTML into the repo? I guess I
> >>> could
> >>> >>>> ask
> >>> >>>>>>>>> ASF
> >>> >>>>>>>>>>>> Infra to push it.
> >>> >>>>>>>>>>>>
> >>> >>>>>>>>>>>> Bruce
> >>> >>>>>>>>>>>>
> >>> >>>>>>>>>>>> On Tue, Dec 12, 2017 at
8:17 PM, Bruce Snyder <
> >>> >>>>>> bruce.snyder@gmail.com
> >>> >>>>>>>>>>
> >>> >>>>>>>>>>>> wrote:
> >>> >>>>>>>>>>>>
> >>> >>>>>>>>>>>>> I'm going to address
all the questions to me in this
> single
> >>> >>>> reply.
> >>> >>>>>>>>>>>>>
> >>> >>>>>>>>>>>>> My original suggestion
was that we export the HTML from
> >>> >>>> Confluence,
> >>> >>>>>>>>>>>>> convert to Markdown
and put the Markdown and the images
> in
> >>> a git
> >>> >>>>>>>>> repo.
> >>> >>>>>>>>>>>>> Markdown is much easier
to edit than raw HTML, especially
> >>> the
> >>> >>>> HTML
> >>> >>>>>>>>>>>> exported
> >>> >>>>>>>>>>>>> from Confluence (blech!).
The idea was that we could use
> >>> Jekyll +
> >>> >>>>>>>>> SAAS
> >>> >>>>>>>>>>> to
> >>> >>>>>>>>>>>>> craft a new website.
In fact, Michael Andre Pearce
> >>> produced a
> >>> >>>>>> mockup
> >>> >>>>>>>>> of
> >>> >>>>>>>>>>>>> this using the Apache
Metro website as an example
> (because
> >>> it
> >>> >>>>>> already
> >>> >>>>>>>>>>>> makes
> >>> >>>>>>>>>>>>> use of Jekyll + SAAS).
It was enough to convince me that
> we
> >>> >>>> should
> >>> >>>>>>>>> take
> >>> >>>>>>>>>>>>> this path, so I started
looking into doing a full, new
> >>> export of
> >>> >>>>>>>>>>>> Confluence
> >>> >>>>>>>>>>>>> pages to HTML. If you
have not seen Michael's mockup, you
> >>> should
> >>> >>>>>>>>> really
> >>> >>>>>>>>>>>>> take a look.
> >>> >>>>>>>>>>>>>
> >>> >>>>>>>>>>>>> So, I manually grabbed
the raw HTML that is automagically
> >>> >>>> exported
> >>> >>>>>>>>> from
> >>> >>>>>>>>>>>>> Confluence and is hosting
the current site that we see at
> >>> >>>>>>>>>>>>> http://activemq.apache.org.
I did some testing on it
> using
> >>> >>>>>> text2html
> >>> >>>>>>>>>>> and
> >>> >>>>>>>>>>>>> the conversion it does
is pretty awful and would require
> a
> >>> lot of
> >>> >>>>>>>>> hand
> >>> >>>>>>>>>>>> work
> >>> >>>>>>>>>>>>> to fix it. So, we discussed
the point that there are
> 1600+
> >>> pages
> >>> >>>> of
> >>> >>>>>>>>>>> HTML
> >>> >>>>>>>>>>>> to
> >>> >>>>>>>>>>>>> manually edit. But
I later realized that it was only
> about
> >>> 950
> >>> >>>> HTML
> >>> >>>>>>>>>>> pages
> >>> >>>>>>>>>>>>> (from what I can tell
so far).
> >>> >>>>>>>>>>>>>
> >>> >>>>>>>>>>>>> Then, Dan Kulp found
a Confluence HTML to raw HTML
> >>> converter
> >>> >>>> built
> >>> >>>>>> on
> >>> >>>>>>>>>>> top
> >>> >>>>>>>>>>>>> of PanDoc. So, I have
also been trying to export the HTML
> >>> from
> >>> >>>>>>>>>>> Confluence
> >>> >>>>>>>>>>>>> in order to try out
the PanDoc converter (it works based
> >>> on the
> >>> >>>>>>>>>>>> Confluence
> >>> >>>>>>>>>>>>> export function which
is different from how the HTML is
> >>> >>>>>> automagically
> >>> >>>>>>>>>>>>> converted). Unfortunately,
I am running into a
> >>> >>>> NullPointerException
> >>> >>>>>>>>>>> from
> >>> >>>>>>>>>>>>> Confluence. ASF Infra
is telling me that the NPE is due
> to
> >>> the
> >>> >>>>>> CDATA
> >>> >>>>>>>>> in
> >>> >>>>>>>>>>>> the
> >>> >>>>>>>>>>>>> search function on
the Navigation page and is suggesting
> >>> that the
> >>> >>>>>>>>>>>> solution
> >>> >>>>>>>>>>>>> is to remove the Navigation
page. The problem with this
> >>> >>>> suggestion
> >>> >>>>>> is
> >>> >>>>>>>>>>>> that
> >>> >>>>>>>>>>>>> it would fundamentally
remove all the navigation on the
> >>> >>>> right-hand
> >>> >>>>>>>>> side
> >>> >>>>>>>>>>>> of
> >>> >>>>>>>>>>>>> the site -- not what
we want.
> >>> >>>>>>>>>>>>>
> >>> >>>>>>>>>>>>> I have also given some
thought to the idea that removing
> >>> the
> >>> >>>>>> current
> >>> >>>>>>>>>>> site
> >>> >>>>>>>>>>>>> will break all links
to old site. This is something that
> >>> cannot
> >>> >>>> be
> >>> >>>>>>>>>>>>> overlooked and must
be prevented as we do not want to
> >>> leave users
> >>> >>>>>> who
> >>> >>>>>>>>>>>> have
> >>> >>>>>>>>>>>>> bookmarked a page high
and dry. This is a fairly easy
> >>> problem to
> >>> >>>>>>>>> solve
> >>> >>>>>>>>>>>> this
> >>> >>>>>>>>>>>>> using some mod_rewrite
rules, the question is if ASF
> Infra
> >>> is
> >>> >>>>>> willing
> >>> >>>>>>>>>>> to
> >>> >>>>>>>>>>>>> allow us to deploy
such custom rules. This should be
> >>> investigated
> >>> >>>>>>>>> when
> >>> >>>>>>>>>>> we
> >>> >>>>>>>>>>>>> get to that point,
but we are not there yet. First, we
> >>> need to
> >>> >>>>>> decide
> >>> >>>>>>>>>>> the
> >>> >>>>>>>>>>>>> best path forward based
on what I have described above in
> >>> the
> >>> >>>>>>>>> preceding
> >>> >>>>>>>>>>>>> paragraphs.
> >>> >>>>>>>>>>>>>
> >>> >>>>>>>>>>>>>
> >>> >>>>>>>>>>>>> Bruce
> >>> >>>>>>>>>>>>>
> >>> >>>>>>>>>>>>> On Tue, Dec 12, 2017
at 11:39 AM, Martyn Taylor <
> >>> >>>>>> mtaylor@redhat.com>
> >>> >>>>>>>>>>>>> wrote:
> >>> >>>>>>>>>>>>>
> >>> >>>>>>>>>>>>>> I was thinking
there would be a single css file for all
> >>> the
> >>> >>>> pages.
> >>> >>>>>>>>>>> But
> >>> >>>>>>>>>>>> I
> >>> >>>>>>>>>>>>>> haven't seen the
files yet. Let's have a play around
> when
> >>> Bruce
> >>> >>>>>>>>> pushes
> >>> >>>>>>>>>>>> the
> >>> >>>>>>>>>>>>>> export.
> >>> >>>>>>>>>>>>>>
> >>> >>>>>>>>>>>>>> Cheers
> >>> >>>>>>>>>>>>>>
> >>> >>>>>>>>>>>>>> On 12 Dec 2017
5:30 pm, "Michael André Pearce" <
> >>> >>>>>>>>>>>>>> michael.andre.pearce@me.com>
> >>> >>>>>>>>>>>>>> wrote:
> >>> >>>>>>>>>>>>>>
> >>> >>>>>>>>>>>>>>> What’s 1600
pages between friends....
> >>> >>>>>>>>>>>>>>>
> >>> >>>>>>>>>>>>>>> I agree it
will be easier to covert to md than to start
> >>> doing
> >>> >>>> css
> >>> >>>>>>>>>>>>>> styles.
> >>> >>>>>>>>>>>>>>> It’s all
from a wiki anyhow so it’s can’t be that far
> >>> off.
> >>> >>>>>>>>>>>>>>>
> >>> >>>>>>>>>>>>>>> It be good
to get some samples (eg 50 pages) if not all
> >>> just to
> >>> >>>>>> try
> >>> >>>>>>>>>>>> and
> >>> >>>>>>>>>>>>>>> see what it
is like.
> >>> >>>>>>>>>>>>>>>
> >>> >>>>>>>>>>>>>>>
> >>> >>>>>>>>>>>>>>>
> >>> >>>>>>>>>>>>>>> On 12 Dec 2017,
at 17:04, Clebert Suconic <
> >>> >>>>>>>>>>> clebert.suconic@gmail.com>
> >>> >>>>>>>>>>>>>>> wrote:
> >>> >>>>>>>>>>>>>>>
> >>> >>>>>>>>>>>>>>>>> Exporting
to MD and creating a gitbook seems like a
> big
> >>> >>>> task, I
> >>> >>>>>>>>>>>>>> suspect
> >>> >>>>>>>>>>>>>>> any
> >>> >>>>>>>>>>>>>>>>> tool
we use will cause a bunch of styling/content
> >>> issues.
> >>> >>>>>>>>>>>>>>>>>
> >>> >>>>>>>>>>>>>>>>> At
least initially, how about we just create a nice
> >>> landing
> >>> >>>>>> page
> >>> >>>>>>>>>>>> that
> >>> >>>>>>>>>>>>>>>>> brings
the ActiveMQ site and Artemis site together,
> and
> >>> >>>>>>>>>>>> refresh/align
> >>> >>>>>>>>>>>>>>> the
> >>> >>>>>>>>>>>>>>>>> existing
content with some CSS?
> >>> >>>>>>>>>>>>>>>>
> >>> >>>>>>>>>>>>>>>> I was just
looking for the minimal effort task. I
> >>> thought that
> >>> >>>>>>>>>>>>>>>> converting
these pages into a doc would be easier than
> >>> >>>>>> converting
> >>> >>>>>>>>>>>> them
> >>> >>>>>>>>>>>>>>>> to another
.css...
> >>> >>>>>>>>>>>>>>>>
> >>> >>>>>>>>>>>>>>>> if the
conversion needed to be done anyways... I
> >>> thought .md
> >>> >>>>>> would
> >>> >>>>>>>>>>>> be
> >>> >>>>>>>>>>>>>>>> easier
and having a better final presentation.
> >>> >>>>>>>>>>>>>>>
> >>> >>>>>>>>>>>>>>
> >>> >>>>>>>>>>>>>
> >>> >>>>>>>>>>>>>
> >>> >>>>>>>>>>>>>
> >>> >>>>>>>>>>>>> --
> >>> >>>>>>>>>>>>> perl -e 'print unpack("u30","D0G)U8V4\@4VYY9&
> >>> >>>>>>>>>>>>> 5R\"F)R=6-E+G-N>61E<D\!G;6%I;\"YC;VT*"
);'
> >>> >>>>>>>>>>>>>
> >>> >>>>>>>>>>>>> ActiveMQ in Action:
http://bit.ly/2je6cQ
> >>> >>>>>>>>>>>>> Blog: http://bsnyder.org/
<http://bruceblog.org/>
> >>> >>>>>>>>>>>>> Twitter: http://twitter.com/brucesnyder
> >>> >>>>>>>>>>>>>
> >>> >>>>>>>>>>>>
> >>> >>>>>>>>>>>>
> >>> >>>>>>>>>>>>
> >>> >>>>>>>>>>>> --
> >>> >>>>>>>>>>>> perl -e 'print
> >>> >>>>>>>>>>>> unpack("u30","D0G)U8V4\@4VYY9&
> >>> 5R\"F)R=6-E+G-N>61E<D\!G;6%I;\
> >>> >>>>>> "YC;VT*"
> >>> >>>>>>>>> );'
> >>> >>>>>>>>>>>>
> >>> >>>>>>>>>>>> ActiveMQ in Action: http://bit.ly/2je6cQ
> >>> >>>>>>>>>>>> Blog: http://bsnyder.org/
<http://bruceblog.org/>
> >>> >>>>>>>>>>>> Twitter: http://twitter.com/brucesnyder
> >>> >>>>>>>>>>>>
> >>> >>>>>>>>>>>
> >>> >>>>>>>>>>
> >>> >>>>>>>>>>
> >>> >>>>>>>>>>
> >>> >>>>>>>>>> --
> >>> >>>>>>>>>> perl -e 'print
> >>> >>>>>>>>>> unpack("u30","D0G)U8V4\@4VYY9&
> 5R\"F)R=6-E+G-N>61E<D\!G;6%I;\
> >>> >>>> "YC;VT*"
> >>> >>>>>>>>> );'
> >>> >>>>>>>>>>
> >>> >>>>>>>>>> ActiveMQ in Action: http://bit.ly/2je6cQ
> >>> >>>>>>>>>> Blog: http://bsnyder.org/ <http://bruceblog.org/>
> >>> >>>>>>>>>> Twitter: http://twitter.com/brucesnyder
> >>> >>>>>>>>>
> >>> >>>>>>>>> --
> >>> >>>>>>>>> Daniel Kulp
> >>> >>>>>>>>> dkulp@apache.org - http://dankulp.com/blog
> >>> >>>>>>>>> Talend Community Coder - http://coders.talend.com
> >>> >>>>>>>>>
> >>> >>>>>>>>>
> >>> >>>>>>>>
> >>> >>>>>>>>
> >>> >>>>>>>> --
> >>> >>>>>>>> perl -e 'print unpack("u30","D0G)U8V4\@4VYY9&
> >>> >>>>>>>> 5R\"F)R=6-E+G-N>61E<D\!G;6%I;\"YC;VT*"
);'
> >>> >>>>>>>>
> >>> >>>>>>>> ActiveMQ in Action: http://bit.ly/2je6cQ
> >>> >>>>>>>> Blog: http://bsnyder.org/ <http://bruceblog.org/>
> >>> >>>>>>>> Twitter: http://twitter.com/brucesnyder
> >>> >>>>>>>>
> >>> >>>>>>>
> >>> >>>>>>>
> >>> >>>>>>>
> >>> >>>>>>> --
> >>> >>>>>>> perl -e 'print
> >>> >>>>>>> unpack("u30","D0G)U8V4\@4VYY9&5R\"F)R=6-E+G-N>61E<D\!G;6%I;\
> >>> "YC;VT*"
> >>> >>>> );'
> >>> >>>>>>>
> >>> >>>>>>> ActiveMQ in Action: http://bit.ly/2je6cQ
> >>> >>>>>>> Blog: http://bsnyder.org/ <http://bruceblog.org/>
> >>> >>>>>>> Twitter: http://twitter.com/brucesnyder
> >>> >>>>>>
> >>> >>>>>> --
> >>> >>>>>> Daniel Kulp
> >>> >>>>>> dkulp@apache.org - http://dankulp.com/blog
> >>> >>>>>> Talend Community Coder - http://coders.talend.com
> >>> >>>>>>
> >>> >>>>>>
> >>> >>>>>
> >>> >>>>>
> >>> >>>>> --
> >>> >>>>> perl -e 'print
> >>> >>>>> unpack("u30","D0G)U8V4\@4VYY9&5R\"F)R=6-E+G-N>61E<D\!G;6%I;\
> "YC;VT*"
> >>> );'
> >>> >>>>>
> >>> >>>>> ActiveMQ in Action: http://bit.ly/2je6cQ
> >>> >>>>> Blog: http://bsnyder.org/ <http://bruceblog.org/>
> >>> >>>>> Twitter: http://twitter.com/brucesnyder
> >>> >>>>
> >>> >>>
> >>> >>>
> >>> >>>
> >>> >>> --
> >>> >>> perl -e 'print
> >>> >>> unpack("u30","D0G)U8V4\@4VYY9&5R\"F)R=6-E+G-N>61E<D\!G;6%I;\
> "YC;VT*"
> >>> );'
> >>> >>>
> >>> >>> ActiveMQ in Action: http://bit.ly/2je6cQ
> >>> >>> Blog: http://bsnyder.org/ <http://bruceblog.org/>
> >>> >>> Twitter: http://twitter.com/brucesnyder
> >>>
> >>
> >>
> >>
> >> --
> >> perl -e 'print unpack("u30","D0G)U8V4\@4VYY9&
> >> 5R\"F)R=6-E+G-N>61E<D\!G;6%I;\"YC;VT*" );'
> >>
> >> ActiveMQ in Action: http://bit.ly/2je6cQ
> >> Blog: http://bsnyder.org/ <http://bruceblog.org/>
> >> Twitter: http://twitter.com/brucesnyder
> >>
> >
> >
> >
> > --
> > perl -e 'print unpack("u30","D0G)U8V4\@4VYY9&
> > 5R\"F)R=6-E+G-N>61E<D\!G;6%I;\"YC;VT*" );'
> >
> > ActiveMQ in Action: http://bit.ly/2je6cQ
> > Blog: http://bsnyder.org/ <http://bruceblog.org/>
> > Twitter: http://twitter.com/brucesnyder
> >
>
>
>
> --
> perl -e 'print
> unpack("u30","D0G)U8V4\@4VYY9&5R\"F)R=6-E+G-N>61E<D\!G;6%I;\"YC;VT*" );'
>
> ActiveMQ in Action: http://bit.ly/2je6cQ
> Blog: http://bsnyder.org/ <http://bruceblog.org/>
> Twitter: http://twitter.com/brucesnyder
>

Mime
  • Unnamed multipart/alternative (inline, None, 0 bytes)
View raw message