activemq-commits mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From hadr...@apache.org
Subject [05/14] Use autocrlf consistently for line endings
Date Tue, 29 Apr 2014 18:34:17 GMT
http://git-wip-us.apache.org/repos/asf/activemq/blob/3f32507f/assembly/src/release/examples/openwire/exploring-jms/QueuePTPSamples/RequestReply/Replier.java
----------------------------------------------------------------------
diff --git a/assembly/src/release/examples/openwire/exploring-jms/QueuePTPSamples/RequestReply/Replier.java b/assembly/src/release/examples/openwire/exploring-jms/QueuePTPSamples/RequestReply/Replier.java
index a7f521a..e43df04 100644
--- a/assembly/src/release/examples/openwire/exploring-jms/QueuePTPSamples/RequestReply/Replier.java
+++ b/assembly/src/release/examples/openwire/exploring-jms/QueuePTPSamples/RequestReply/Replier.java
@@ -1,338 +1,338 @@
-/*
- * � 2001-2009, Progress Software Corporation and/or its subsidiaries or affiliates.  All rights reserved.
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- 
-Sample Application
-
-Writing a Basic JMS Application with Point-to-Point Queues,
-using:
-    - Synchronous Request/Reply
-    - javax.jms.QueueRequestor class
-    - JMSReplyTo Header
-
-When this program runs, it waits for messages on the queue,
-"SampleQ1" (by default).
-When that message arrives, a response based on the request
-is sent back to the "Requestor" specified in the JMSReplyTo header.
-
-This sample replies with a simple text manipulation of the request;
-the text is either folded to all UPPERCASE or all lowercase.
-
-Usage:
-  java Replier -b <broker:port> -u <username> -p <password> -qr <queue> -m <code>
-      -b broker:port points to your message broker
-                     Default: tcp://localhost:61616
-      -u username    must be unique (but is not checked)
-                     Default: SampleReplier
-      -p password    password for user (not checked)
-                     Default: password
-      -qr queue      name of queue for receiving requests
-                     Default:  Q1
-      -m mode        replier mode (uppercase, or lowercase)
-                     Default: uppercase
-
-Suggested demonstration:
-  - In a console window with the environment set,
-    start a copy of the Replier. For example:
-       java Replier -u SampleQReplier
-  - In another console window, start a Requestor.
-    For example:
-       java Requestor -u SampleQRequestor
-  - Enter text in the Requestor window then press Enter.
-    The Replier responds with the message in all uppercase characters.
-  - Start other Requestors with different user names to see that
-    replies are not broadcast to all users. For example:
-       java Requestor -u SampleRequestorFoo
-
-  - Start other Repliers.
-  - See that only one replier is receiving messages,(as it should).
-  - See the Requestor only receives one response.
-       java Replier -u toLower -m lowercase
-
- */
-import org.apache.activemq.*;
-
-
-public class Replier
-    implements javax.jms.MessageListener
-{
-    private static final String DEFAULT_BROKER_NAME = "tcp://localhost:61616";
-    private static final String DEFAULT_USER_NAME = "SampleReplier";
-    private static final String DEFAULT_PASSWORD = "password";
-    private static final String DEFAULT_QUEUE = "Q1";
-    private static final String DEFAULT_MODE = "uppercase";
-    private static final int UPPERCASE = 0;
-    private static final int LOWERCASE = 1;
-
-    private javax.jms.Connection connect = null;
-    private javax.jms.Session session = null;
-    private javax.jms.MessageProducer replier = null;
-
-    private int imode = UPPERCASE;
-
-    /** Create JMS client for sending and receiving messages. */
-    private void start ( String broker, String username, String password, String rQueue, String mode)
-    {
-        // Set the operation mode
-        imode = (mode.equals("uppercase")) ? UPPERCASE : LOWERCASE;
-
-        // Create a connection.
-        try
-        {
-            javax.jms.ConnectionFactory factory;
-            factory = new ActiveMQConnectionFactory(username, password, broker);
-            connect = factory.createConnection (username, password);
-            session = connect.createSession(true, javax.jms.Session.AUTO_ACKNOWLEDGE);
-        }
-        catch (javax.jms.JMSException jmse)
-        {
-            System.err.println("error: Cannot connect to Broker - " + broker);
-            jmse.printStackTrace();
-            System.exit(1);
-        }
-
-        // Create Receivers to application queues as well as a Sender
-        // to use for JMS replies.
-        try
-        {
-            javax.jms.Queue queue = session.createQueue (rQueue);
-            javax.jms.MessageConsumer receiver = session.createConsumer(queue);
-            receiver.setMessageListener(this);
-            replier = session.createProducer(null);  // Queue will be set for each reply
-            // Now that all setup is complete, start the Connection
-            connect.start();
-        }
-        catch (javax.jms.JMSException jmse)
-        {
-            jmse.printStackTrace();
-            exit();
-        }
-
-        try
-        {
-            // Read standard input waiting for "EXIT" command.
-            java.io.BufferedReader stdin =
-                new java.io.BufferedReader( new java.io.InputStreamReader( System.in ) );
-            while ( true )
-            {
-                   System.out.println ("\nReplier application:\n"
-			            					+ "============================\n"
-			            					+ "The application user " + username + " connects to the broker at " + DEFAULT_BROKER_NAME + ".\n"
-											+ "The application gets requests with JMSReplyTo set on the " + DEFAULT_QUEUE + " queue."
-											+ "The message is transformed to all uppercase or all lowercase, and then returned to the requestor."
-			                                + "The Requestor application displays the result.\n\n"
-			                                + "Enter EXIT or press Ctrl+C to close the Replier.\n");
-                String s = stdin.readLine();
-                if ( s == null || s.equalsIgnoreCase("EXIT"))
-                {
-                    System.out.println ("\nStopping Replier. Please wait..\n>");
-                    exit();
-                }
-           }
-        }
-        catch ( java.io.IOException ioe )
-        {
-            ioe.printStackTrace();
-        }
-    }
-
-    /**
-     * Handle the message.
-     * (as specified in the javax.jms.MessageListener interface).
-     *
-     * IMPORTANT NOTES:
-     * (1)We must follow the design paradigm for JMS
-     *    synchronous requests.  That is, we must:
-     *     - get the message
-     *     - look for the header specifying JMSReplyTo
-     *     - send a reply to the queue specified there.
-     *    Failing to follow these steps might leave the originator
-     *    of the request waiting forever.
-     * (2)Unlike the 'Talk' sample and others using an asynchronous
-     *    message listener, it is possible here to use ONLY
-     *    ONE SESSION because the messages being sent are sent from
-     *    the same thread of control handling message delivery. For
-     *    more information see the JMS spec v1.0.2 section 4.4.6.
-     *
-     * OPTIONAL BEHAVIOR: The following actions taken by the
-     * message handler represent good programming style, but are
-     * not required by the design paradigm for JMS requests.
-     *   - set the JMSCorrelationID (tying the response back to
-     *     the original request.
-     *   - use transacted session "commit" so receipt of request
-     *     won't happen without the reply being sent.
-     *
-     */
-    public void onMessage( javax.jms.Message aMessage)
-    {
-        try
-        {
-            // Cast the message as a text message.
-            javax.jms.TextMessage textMessage = (javax.jms.TextMessage) aMessage;
-
-            // This handler reads a single String from the
-            // message and prints it to the standard output.
-            try
-            {
-                String string = textMessage.getText();
-                System.out.println( "[Request] " + string );
-
-                // Check for a ReplyTo Queue
-                javax.jms.Queue replyQueue = (javax.jms.Queue) aMessage.getJMSReplyTo();
-                if (replyQueue != null)
-                {
-                    // Send the modified message back.
-                    javax.jms.TextMessage reply =  session.createTextMessage();
-                    if (imode == UPPERCASE)
-                        reply.setText("Uppercasing-" + string.toUpperCase());
-                    else
-                        reply.setText("Lowercasing-" + string.toLowerCase());
-                    reply.setJMSCorrelationID(aMessage.getJMSMessageID());
-                    replier.send (replyQueue, reply);
-                    session.commit();
-                }
-            }
-            catch (javax.jms.JMSException jmse)
-            {
-                jmse.printStackTrace();
-            }
-        }
-        catch (java.lang.RuntimeException rte)
-        {
-            rte.printStackTrace();
-        }
-    }
-
-    /** Cleanup resources cleanly and exit. */
-    private void exit()
-    {
-        try
-        {
-            connect.close();
-        }
-        catch (javax.jms.JMSException jmse)
-        {
-            jmse.printStackTrace();
-        }
-
-        System.exit(0);
-    }
-
-    //
-    // NOTE: the remainder of this sample deals with reading arguments
-    // and does not utilize any JMS classes or code.
-    //
-
-    /** Main program entry point. */
-    public static void main(String argv[]) {
-
-        // Values to be read from parameters
-        String broker    = DEFAULT_BROKER_NAME;
-        String username  = DEFAULT_USER_NAME;
-        String password  = DEFAULT_PASSWORD;
-        String queue     = DEFAULT_QUEUE;
-        String mode      = DEFAULT_MODE;
-
-        // Check parameters
-        for (int i = 0; i < argv.length; i++) {
-            String arg = argv[i];
-
-
-            if (arg.equals("-b")) {
-                if (i == argv.length - 1 || argv[i+1].startsWith("-")) {
-                    System.err.println("error: missing broker name:port");
-                    System.exit(1);
-                }
-                broker = argv[++i];
-                continue;
-            }
-
-            if (arg.equals("-u")) {
-                if (i == argv.length - 1 || argv[i+1].startsWith("-")) {
-                    System.err.println("error: missing user name");
-                    System.exit(1);
-                }
-                username = argv[++i];
-                continue;
-            }
-
-            if (arg.equals("-p")) {
-                if (i == argv.length - 1 || argv[i+1].startsWith("-")) {
-                    System.err.println("error: missing password");
-                    System.exit(1);
-                }
-                password = argv[++i];
-                continue;
-            }
-
-            if (arg.equals("-qr")) {
-                if (i == argv.length - 1 || argv[i+1].startsWith("-")) {
-                    System.err.println("error: missing queue");
-                    System.exit(1);
-                }
-                queue = argv[++i];
-                continue;
-            }
-
-            if (arg.equals("-m")) {
-                if (i == argv.length - 1 || argv[i+1].startsWith("-")) {
-                    System.err.println("error: missing mode");
-                    System.exit(1);
-                }
-                mode = argv[++i];
-                if (!(mode.equals("uppercase") || mode.equals("lowercase"))) {
-                    System.err.println("error: mode must be 'uppercase' or 'lowercase'");
-                    System.exit(1);
-                }
-                continue;
-            }
-
-            if (arg.equals("-h")) {
-                printUsage();
-                System.exit(1);
-            }
-
-            // Invalid argument
-            System.err.println ("error: unexpected argument: "+arg);
-            printUsage();
-            System.exit(1);
-        }
-
-        // Start the JMS client.
-        Replier replier = new Replier ();
-        replier.start (broker, username, password, queue, mode);
-    }
-
-    /** Prints the usage. */
-    private static void printUsage() {
-
-        StringBuffer use = new StringBuffer();
-        use.append("usage: java Replier (options) ...\n\n");
-        use.append("options:\n");
-        use.append("  -b name:port Specify name:port of broker.\n");
-        use.append("               Default broker: "+DEFAULT_BROKER_NAME+"\n");
-        use.append("  -u name      Specify unique user name.\n");
-        use.append("               Default broker: "+DEFAULT_USER_NAME+"\n");
-        use.append("  -p password  Specify password for user.\n");
-        use.append("               Default password: "+DEFAULT_PASSWORD+"\n");
-        use.append("  -m mode      Replier operating mode - uppercase or lowercase.\n");
-        use.append("               Default mode: "+DEFAULT_MODE+"\n");
-        use.append("  -qr queue    Specify name of queue for receiving.\n");
-        use.append("               Default queue: "+DEFAULT_QUEUE+"\n");
-        use.append("  -h           This help screen.\n");
-        System.err.println (use);
-    }
-
-}
-
+/*
+ * � 2001-2009, Progress Software Corporation and/or its subsidiaries or affiliates.  All rights reserved.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ 
+Sample Application
+
+Writing a Basic JMS Application with Point-to-Point Queues,
+using:
+    - Synchronous Request/Reply
+    - javax.jms.QueueRequestor class
+    - JMSReplyTo Header
+
+When this program runs, it waits for messages on the queue,
+"SampleQ1" (by default).
+When that message arrives, a response based on the request
+is sent back to the "Requestor" specified in the JMSReplyTo header.
+
+This sample replies with a simple text manipulation of the request;
+the text is either folded to all UPPERCASE or all lowercase.
+
+Usage:
+  java Replier -b <broker:port> -u <username> -p <password> -qr <queue> -m <code>
+      -b broker:port points to your message broker
+                     Default: tcp://localhost:61616
+      -u username    must be unique (but is not checked)
+                     Default: SampleReplier
+      -p password    password for user (not checked)
+                     Default: password
+      -qr queue      name of queue for receiving requests
+                     Default:  Q1
+      -m mode        replier mode (uppercase, or lowercase)
+                     Default: uppercase
+
+Suggested demonstration:
+  - In a console window with the environment set,
+    start a copy of the Replier. For example:
+       java Replier -u SampleQReplier
+  - In another console window, start a Requestor.
+    For example:
+       java Requestor -u SampleQRequestor
+  - Enter text in the Requestor window then press Enter.
+    The Replier responds with the message in all uppercase characters.
+  - Start other Requestors with different user names to see that
+    replies are not broadcast to all users. For example:
+       java Requestor -u SampleRequestorFoo
+
+  - Start other Repliers.
+  - See that only one replier is receiving messages,(as it should).
+  - See the Requestor only receives one response.
+       java Replier -u toLower -m lowercase
+
+ */
+import org.apache.activemq.*;
+
+
+public class Replier
+    implements javax.jms.MessageListener
+{
+    private static final String DEFAULT_BROKER_NAME = "tcp://localhost:61616";
+    private static final String DEFAULT_USER_NAME = "SampleReplier";
+    private static final String DEFAULT_PASSWORD = "password";
+    private static final String DEFAULT_QUEUE = "Q1";
+    private static final String DEFAULT_MODE = "uppercase";
+    private static final int UPPERCASE = 0;
+    private static final int LOWERCASE = 1;
+
+    private javax.jms.Connection connect = null;
+    private javax.jms.Session session = null;
+    private javax.jms.MessageProducer replier = null;
+
+    private int imode = UPPERCASE;
+
+    /** Create JMS client for sending and receiving messages. */
+    private void start ( String broker, String username, String password, String rQueue, String mode)
+    {
+        // Set the operation mode
+        imode = (mode.equals("uppercase")) ? UPPERCASE : LOWERCASE;
+
+        // Create a connection.
+        try
+        {
+            javax.jms.ConnectionFactory factory;
+            factory = new ActiveMQConnectionFactory(username, password, broker);
+            connect = factory.createConnection (username, password);
+            session = connect.createSession(true, javax.jms.Session.AUTO_ACKNOWLEDGE);
+        }
+        catch (javax.jms.JMSException jmse)
+        {
+            System.err.println("error: Cannot connect to Broker - " + broker);
+            jmse.printStackTrace();
+            System.exit(1);
+        }
+
+        // Create Receivers to application queues as well as a Sender
+        // to use for JMS replies.
+        try
+        {
+            javax.jms.Queue queue = session.createQueue (rQueue);
+            javax.jms.MessageConsumer receiver = session.createConsumer(queue);
+            receiver.setMessageListener(this);
+            replier = session.createProducer(null);  // Queue will be set for each reply
+            // Now that all setup is complete, start the Connection
+            connect.start();
+        }
+        catch (javax.jms.JMSException jmse)
+        {
+            jmse.printStackTrace();
+            exit();
+        }
+
+        try
+        {
+            // Read standard input waiting for "EXIT" command.
+            java.io.BufferedReader stdin =
+                new java.io.BufferedReader( new java.io.InputStreamReader( System.in ) );
+            while ( true )
+            {
+                   System.out.println ("\nReplier application:\n"
+			            					+ "============================\n"
+			            					+ "The application user " + username + " connects to the broker at " + DEFAULT_BROKER_NAME + ".\n"
+											+ "The application gets requests with JMSReplyTo set on the " + DEFAULT_QUEUE + " queue."
+											+ "The message is transformed to all uppercase or all lowercase, and then returned to the requestor."
+			                                + "The Requestor application displays the result.\n\n"
+			                                + "Enter EXIT or press Ctrl+C to close the Replier.\n");
+                String s = stdin.readLine();
+                if ( s == null || s.equalsIgnoreCase("EXIT"))
+                {
+                    System.out.println ("\nStopping Replier. Please wait..\n>");
+                    exit();
+                }
+           }
+        }
+        catch ( java.io.IOException ioe )
+        {
+            ioe.printStackTrace();
+        }
+    }
+
+    /**
+     * Handle the message.
+     * (as specified in the javax.jms.MessageListener interface).
+     *
+     * IMPORTANT NOTES:
+     * (1)We must follow the design paradigm for JMS
+     *    synchronous requests.  That is, we must:
+     *     - get the message
+     *     - look for the header specifying JMSReplyTo
+     *     - send a reply to the queue specified there.
+     *    Failing to follow these steps might leave the originator
+     *    of the request waiting forever.
+     * (2)Unlike the 'Talk' sample and others using an asynchronous
+     *    message listener, it is possible here to use ONLY
+     *    ONE SESSION because the messages being sent are sent from
+     *    the same thread of control handling message delivery. For
+     *    more information see the JMS spec v1.0.2 section 4.4.6.
+     *
+     * OPTIONAL BEHAVIOR: The following actions taken by the
+     * message handler represent good programming style, but are
+     * not required by the design paradigm for JMS requests.
+     *   - set the JMSCorrelationID (tying the response back to
+     *     the original request.
+     *   - use transacted session "commit" so receipt of request
+     *     won't happen without the reply being sent.
+     *
+     */
+    public void onMessage( javax.jms.Message aMessage)
+    {
+        try
+        {
+            // Cast the message as a text message.
+            javax.jms.TextMessage textMessage = (javax.jms.TextMessage) aMessage;
+
+            // This handler reads a single String from the
+            // message and prints it to the standard output.
+            try
+            {
+                String string = textMessage.getText();
+                System.out.println( "[Request] " + string );
+
+                // Check for a ReplyTo Queue
+                javax.jms.Queue replyQueue = (javax.jms.Queue) aMessage.getJMSReplyTo();
+                if (replyQueue != null)
+                {
+                    // Send the modified message back.
+                    javax.jms.TextMessage reply =  session.createTextMessage();
+                    if (imode == UPPERCASE)
+                        reply.setText("Uppercasing-" + string.toUpperCase());
+                    else
+                        reply.setText("Lowercasing-" + string.toLowerCase());
+                    reply.setJMSCorrelationID(aMessage.getJMSMessageID());
+                    replier.send (replyQueue, reply);
+                    session.commit();
+                }
+            }
+            catch (javax.jms.JMSException jmse)
+            {
+                jmse.printStackTrace();
+            }
+        }
+        catch (java.lang.RuntimeException rte)
+        {
+            rte.printStackTrace();
+        }
+    }
+
+    /** Cleanup resources cleanly and exit. */
+    private void exit()
+    {
+        try
+        {
+            connect.close();
+        }
+        catch (javax.jms.JMSException jmse)
+        {
+            jmse.printStackTrace();
+        }
+
+        System.exit(0);
+    }
+
+    //
+    // NOTE: the remainder of this sample deals with reading arguments
+    // and does not utilize any JMS classes or code.
+    //
+
+    /** Main program entry point. */
+    public static void main(String argv[]) {
+
+        // Values to be read from parameters
+        String broker    = DEFAULT_BROKER_NAME;
+        String username  = DEFAULT_USER_NAME;
+        String password  = DEFAULT_PASSWORD;
+        String queue     = DEFAULT_QUEUE;
+        String mode      = DEFAULT_MODE;
+
+        // Check parameters
+        for (int i = 0; i < argv.length; i++) {
+            String arg = argv[i];
+
+
+            if (arg.equals("-b")) {
+                if (i == argv.length - 1 || argv[i+1].startsWith("-")) {
+                    System.err.println("error: missing broker name:port");
+                    System.exit(1);
+                }
+                broker = argv[++i];
+                continue;
+            }
+
+            if (arg.equals("-u")) {
+                if (i == argv.length - 1 || argv[i+1].startsWith("-")) {
+                    System.err.println("error: missing user name");
+                    System.exit(1);
+                }
+                username = argv[++i];
+                continue;
+            }
+
+            if (arg.equals("-p")) {
+                if (i == argv.length - 1 || argv[i+1].startsWith("-")) {
+                    System.err.println("error: missing password");
+                    System.exit(1);
+                }
+                password = argv[++i];
+                continue;
+            }
+
+            if (arg.equals("-qr")) {
+                if (i == argv.length - 1 || argv[i+1].startsWith("-")) {
+                    System.err.println("error: missing queue");
+                    System.exit(1);
+                }
+                queue = argv[++i];
+                continue;
+            }
+
+            if (arg.equals("-m")) {
+                if (i == argv.length - 1 || argv[i+1].startsWith("-")) {
+                    System.err.println("error: missing mode");
+                    System.exit(1);
+                }
+                mode = argv[++i];
+                if (!(mode.equals("uppercase") || mode.equals("lowercase"))) {
+                    System.err.println("error: mode must be 'uppercase' or 'lowercase'");
+                    System.exit(1);
+                }
+                continue;
+            }
+
+            if (arg.equals("-h")) {
+                printUsage();
+                System.exit(1);
+            }
+
+            // Invalid argument
+            System.err.println ("error: unexpected argument: "+arg);
+            printUsage();
+            System.exit(1);
+        }
+
+        // Start the JMS client.
+        Replier replier = new Replier ();
+        replier.start (broker, username, password, queue, mode);
+    }
+
+    /** Prints the usage. */
+    private static void printUsage() {
+
+        StringBuffer use = new StringBuffer();
+        use.append("usage: java Replier (options) ...\n\n");
+        use.append("options:\n");
+        use.append("  -b name:port Specify name:port of broker.\n");
+        use.append("               Default broker: "+DEFAULT_BROKER_NAME+"\n");
+        use.append("  -u name      Specify unique user name.\n");
+        use.append("               Default broker: "+DEFAULT_USER_NAME+"\n");
+        use.append("  -p password  Specify password for user.\n");
+        use.append("               Default password: "+DEFAULT_PASSWORD+"\n");
+        use.append("  -m mode      Replier operating mode - uppercase or lowercase.\n");
+        use.append("               Default mode: "+DEFAULT_MODE+"\n");
+        use.append("  -qr queue    Specify name of queue for receiving.\n");
+        use.append("               Default queue: "+DEFAULT_QUEUE+"\n");
+        use.append("  -h           This help screen.\n");
+        System.err.println (use);
+    }
+
+}
+

http://git-wip-us.apache.org/repos/asf/activemq/blob/3f32507f/assembly/src/release/examples/openwire/exploring-jms/QueuePTPSamples/RequestReply/Requestor.java
----------------------------------------------------------------------
diff --git a/assembly/src/release/examples/openwire/exploring-jms/QueuePTPSamples/RequestReply/Requestor.java b/assembly/src/release/examples/openwire/exploring-jms/QueuePTPSamples/RequestReply/Requestor.java
index 76a8d96..9d0adb3 100644
--- a/assembly/src/release/examples/openwire/exploring-jms/QueuePTPSamples/RequestReply/Requestor.java
+++ b/assembly/src/release/examples/openwire/exploring-jms/QueuePTPSamples/RequestReply/Requestor.java
@@ -1,264 +1,264 @@
-/**
- * Licensed to the Apache Software Foundation (ASF) under one or more
- * contributor license agreements.  See the NOTICE file distributed with
- * this work for additional information regarding copyright ownership.
- * The ASF licenses this file to You under the Apache License, Version 2.0
- * (the "License"); you may not use this file except in compliance with
- * the License.  You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-/*
-Copyright 2001-2008, Progress Software Corporation -  All Rights Reserved
-
-Sample Application
-
-Writing a Basic JMS Application with Point-to-Point Queues,
-using:
-    - Synchronous Request/Reply
-    - javax.jms.QueueRequestor class
-    - JMSReplyTo Header
-
-When this program runs, it reads input from System.in
-and then sends the text as a message to the queue, "Q1"
-(by default).
-
-A "Replier" class should be waiting for the request.
-It will reply with a message.
-
-NOTE: Unlike the Publish-Subscribe example, you need
-not run the Replier first.  However, this Requestor
-will block until the Replier is started to service the queue.
-
-Usage:
-  java Requestor -b <broker:port> -u <username> -p <password> -qs <queue>
-      -b broker:port points to your message broker
-                     Default: tcp://localhost:61616
-      -u username    must be unique (but is not checked)
-                     Default: SampleRequestor
-      -p password    password for user (not checked)
-                     Default: password
-      -qs queue      name of queue for sending requests
-                     Default: SampleQ1
-
-Suggested demonstration:
-  - In a console window with the environment set,
-    start a copy of the Replier. For example:
-       java Replier -u SampleQReplier
-  - In another console window, start a Requestor.
-    For example:
-       java Requestor -u SampleQRequestor
-  - Enter text in the Requestor window then press Enter.
-    The Replier responds with the message in all uppercase characters.
-  - Start other Requestors with different user names to see that
-    replies are not broadcast to all users. For example:
-       java Requestor -u SampleRequestorFoo
-  - Start other Repliers.
-  - See that only one replier is receiving messages,(as it should).
-  - See the Requestor only receives one response.
-       java Replier -u toLower -m lowercase
-
-*/
-import org.apache.activemq.*;
-
-
-public class Requestor
-{
-    private static final String DEFAULT_BROKER_NAME = "tcp://localhost:61616";
-    private static final String DEFAULT_USER_NAME = "SampleRequestor";
-    private static final String DEFAULT_PASSWORD = "password";
-    private static final String DEFAULT_QUEUE = "Q1";
-
-    private javax.jms.QueueConnection connect = null;
-    private javax.jms.QueueSession session = null;
-    private javax.jms.QueueRequestor requestor = null;
-
-    /** Create JMS client for sending messages. */
-    private void start ( String broker, String username, String password, String sQueue)
-    {
-        // Create a connection.
-        try
-        {
-            javax.jms.QueueConnectionFactory factory;
-            factory = new ActiveMQConnectionFactory(username, password, broker);
-            connect = factory.createQueueConnection (username, password);
-            session = connect.createQueueSession(false,javax.jms.Session.AUTO_ACKNOWLEDGE);
-        }
-        catch (javax.jms.JMSException jmse)
-        {
-            System.err.println("error: Cannot connect to Broker - " + broker);
-            jmse.printStackTrace();
-            System.exit(1);
-        }
-
-        // Create the Queue and QueueRequestor for sending requests.
-        javax.jms.Queue queue = null;
-        try
-        {
-            queue = session.createQueue (sQueue);
-            requestor = new javax.jms.QueueRequestor(session, queue);
-
-            // Now that all setup is complete, start the Connection.
-            connect.start();
-        }
-        catch (javax.jms.JMSException jmse)
-        {
-            jmse.printStackTrace();
-            exit();
-        }
-
-        try
-        {
-            // Read all standard input and send it as a message.
-            java.io.BufferedReader stdin =
-                new java.io.BufferedReader( new java.io.InputStreamReader( System.in ) );
-            System.out.println ("\nRequestor application:\n"
-			            					+ "============================\n"
-			            					+ "The application user " + username + " connects to the broker at " + DEFAULT_BROKER_NAME + ".\n"
-											+ "The application uses a QueueRequestor to on the " + DEFAULT_QUEUE + " queue."
-											+ "The Replier application gets the message, and transforms it."
-			                                + "The Requestor application displays the result.\n\n"
-			                                + "Type some mixed case text, and then press Enter to make a request.\n");
-            while ( true )
-            {
-                String s = stdin.readLine();
-
-                if ( s == null )
-                    exit();
-                else if ( s.length() > 0 )
-                {
-                    javax.jms.TextMessage msg = session.createTextMessage();
-                    msg.setText( username + ": " + s );
-                    // Instead of sending, we will use the QueueRequestor.
-                    javax.jms.Message response = requestor.request(msg);
-                    // The message should be a TextMessage.  Just report it.
-                    javax.jms.TextMessage textMessage = (javax.jms.TextMessage) response;
-                    System.out.println( "[Reply] " + textMessage.getText() );
-                }
-            }
-        }
-        catch ( java.io.IOException ioe )
-        {
-            ioe.printStackTrace();
-        }
-        catch ( javax.jms.JMSException jmse )
-        {
-            jmse.printStackTrace();
-        }
-    }
-
-    /** Cleanup resources cleanly and exit. */
-    private void exit()
-    {
-        try
-        {
-            requestor.close();
-            connect.close();
-        }
-        catch (javax.jms.JMSException jmse)
-        {
-            jmse.printStackTrace();
-        }
-
-        System.exit(0);
-    }
-
-    //
-    // NOTE: the remainder of this sample deals with reading arguments
-    // and does not utilize any JMS classes or code.
-    //
-
-    /** Main program entry point. */
-    public static void main(String argv[]) {
-
-        // Values to be read from parameters
-        String broker    = DEFAULT_BROKER_NAME;
-        String username  = DEFAULT_USER_NAME;
-        String password  = DEFAULT_PASSWORD;
-        String queue     = DEFAULT_QUEUE;
-
-        // Check parameters
-        for (int i = 0; i < argv.length; i++) {
-            String arg = argv[i];
-
-
-            if (arg.equals("-b")) {
-                if (i == argv.length - 1 || argv[i+1].startsWith("-")) {
-                    System.err.println("error: missing broker name:port");
-                    System.exit(1);
-                }
-                broker = argv[++i];
-                continue;
-            }
-
-            if (arg.equals("-u")) {
-                if (i == argv.length - 1 || argv[i+1].startsWith("-")) {
-                    System.err.println("error: missing user name");
-                    System.exit(1);
-                }
-                username = argv[++i];
-                continue;
-            }
-
-            if (arg.equals("-p")) {
-                if (i == argv.length - 1 || argv[i+1].startsWith("-")) {
-                    System.err.println("error: missing password");
-                    System.exit(1);
-                }
-                password = argv[++i];
-                continue;
-            }
-
-            if (arg.equals("-qs")) {
-                if (i == argv.length - 1 || argv[i+1].startsWith("-")) {
-                    System.err.println("error: missing queue");
-                    System.exit(1);
-                }
-                queue = argv[++i];
-                continue;
-            }
-
-            if (arg.equals("-h")) {
-                printUsage();
-                System.exit(1);
-            }
-
-            // Invalid argument
-            System.err.println ("error: unexpected argument: "+arg);
-            printUsage();
-            System.exit(1);
-        }
-
-        // Start the JMS client for sending requests.
-        Requestor requestor = new Requestor();
-        requestor.start (broker, username, password, queue);
-
-    }
-
-    /** Prints the usage. */
-    private static void printUsage() {
-
-        StringBuffer use = new StringBuffer();
-        use.append("usage: java Requestor (options) ...\n\n");
-        use.append("options:\n");
-        use.append("  -b name:port Specify name:port of broker.\n");
-        use.append("               Default broker: "+DEFAULT_BROKER_NAME+"\n");
-        use.append("  -u name      Specify unique user name.\n");
-        use.append("               Default broker: "+DEFAULT_USER_NAME+"\n");
-        use.append("  -p password  Specify password for user.\n");
-        use.append("               Default password: "+DEFAULT_PASSWORD+"\n");
-        use.append("  -qs queue    Specify name of queue for sending.\n");
-        use.append("               Default queue: "+DEFAULT_QUEUE+"\n");
-        use.append("  -h           This help screen.\n");
-        System.err.println (use);
-    }
-
-}
-
+/**
+ * Licensed to the Apache Software Foundation (ASF) under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.
+ * The ASF licenses this file to You under the Apache License, Version 2.0
+ * (the "License"); you may not use this file except in compliance with
+ * the License.  You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+Copyright 2001-2008, Progress Software Corporation -  All Rights Reserved
+
+Sample Application
+
+Writing a Basic JMS Application with Point-to-Point Queues,
+using:
+    - Synchronous Request/Reply
+    - javax.jms.QueueRequestor class
+    - JMSReplyTo Header
+
+When this program runs, it reads input from System.in
+and then sends the text as a message to the queue, "Q1"
+(by default).
+
+A "Replier" class should be waiting for the request.
+It will reply with a message.
+
+NOTE: Unlike the Publish-Subscribe example, you need
+not run the Replier first.  However, this Requestor
+will block until the Replier is started to service the queue.
+
+Usage:
+  java Requestor -b <broker:port> -u <username> -p <password> -qs <queue>
+      -b broker:port points to your message broker
+                     Default: tcp://localhost:61616
+      -u username    must be unique (but is not checked)
+                     Default: SampleRequestor
+      -p password    password for user (not checked)
+                     Default: password
+      -qs queue      name of queue for sending requests
+                     Default: SampleQ1
+
+Suggested demonstration:
+  - In a console window with the environment set,
+    start a copy of the Replier. For example:
+       java Replier -u SampleQReplier
+  - In another console window, start a Requestor.
+    For example:
+       java Requestor -u SampleQRequestor
+  - Enter text in the Requestor window then press Enter.
+    The Replier responds with the message in all uppercase characters.
+  - Start other Requestors with different user names to see that
+    replies are not broadcast to all users. For example:
+       java Requestor -u SampleRequestorFoo
+  - Start other Repliers.
+  - See that only one replier is receiving messages,(as it should).
+  - See the Requestor only receives one response.
+       java Replier -u toLower -m lowercase
+
+*/
+import org.apache.activemq.*;
+
+
+public class Requestor
+{
+    private static final String DEFAULT_BROKER_NAME = "tcp://localhost:61616";
+    private static final String DEFAULT_USER_NAME = "SampleRequestor";
+    private static final String DEFAULT_PASSWORD = "password";
+    private static final String DEFAULT_QUEUE = "Q1";
+
+    private javax.jms.QueueConnection connect = null;
+    private javax.jms.QueueSession session = null;
+    private javax.jms.QueueRequestor requestor = null;
+
+    /** Create JMS client for sending messages. */
+    private void start ( String broker, String username, String password, String sQueue)
+    {
+        // Create a connection.
+        try
+        {
+            javax.jms.QueueConnectionFactory factory;
+            factory = new ActiveMQConnectionFactory(username, password, broker);
+            connect = factory.createQueueConnection (username, password);
+            session = connect.createQueueSession(false,javax.jms.Session.AUTO_ACKNOWLEDGE);
+        }
+        catch (javax.jms.JMSException jmse)
+        {
+            System.err.println("error: Cannot connect to Broker - " + broker);
+            jmse.printStackTrace();
+            System.exit(1);
+        }
+
+        // Create the Queue and QueueRequestor for sending requests.
+        javax.jms.Queue queue = null;
+        try
+        {
+            queue = session.createQueue (sQueue);
+            requestor = new javax.jms.QueueRequestor(session, queue);
+
+            // Now that all setup is complete, start the Connection.
+            connect.start();
+        }
+        catch (javax.jms.JMSException jmse)
+        {
+            jmse.printStackTrace();
+            exit();
+        }
+
+        try
+        {
+            // Read all standard input and send it as a message.
+            java.io.BufferedReader stdin =
+                new java.io.BufferedReader( new java.io.InputStreamReader( System.in ) );
+            System.out.println ("\nRequestor application:\n"
+			            					+ "============================\n"
+			            					+ "The application user " + username + " connects to the broker at " + DEFAULT_BROKER_NAME + ".\n"
+											+ "The application uses a QueueRequestor to on the " + DEFAULT_QUEUE + " queue."
+											+ "The Replier application gets the message, and transforms it."
+			                                + "The Requestor application displays the result.\n\n"
+			                                + "Type some mixed case text, and then press Enter to make a request.\n");
+            while ( true )
+            {
+                String s = stdin.readLine();
+
+                if ( s == null )
+                    exit();
+                else if ( s.length() > 0 )
+                {
+                    javax.jms.TextMessage msg = session.createTextMessage();
+                    msg.setText( username + ": " + s );
+                    // Instead of sending, we will use the QueueRequestor.
+                    javax.jms.Message response = requestor.request(msg);
+                    // The message should be a TextMessage.  Just report it.
+                    javax.jms.TextMessage textMessage = (javax.jms.TextMessage) response;
+                    System.out.println( "[Reply] " + textMessage.getText() );
+                }
+            }
+        }
+        catch ( java.io.IOException ioe )
+        {
+            ioe.printStackTrace();
+        }
+        catch ( javax.jms.JMSException jmse )
+        {
+            jmse.printStackTrace();
+        }
+    }
+
+    /** Cleanup resources cleanly and exit. */
+    private void exit()
+    {
+        try
+        {
+            requestor.close();
+            connect.close();
+        }
+        catch (javax.jms.JMSException jmse)
+        {
+            jmse.printStackTrace();
+        }
+
+        System.exit(0);
+    }
+
+    //
+    // NOTE: the remainder of this sample deals with reading arguments
+    // and does not utilize any JMS classes or code.
+    //
+
+    /** Main program entry point. */
+    public static void main(String argv[]) {
+
+        // Values to be read from parameters
+        String broker    = DEFAULT_BROKER_NAME;
+        String username  = DEFAULT_USER_NAME;
+        String password  = DEFAULT_PASSWORD;
+        String queue     = DEFAULT_QUEUE;
+
+        // Check parameters
+        for (int i = 0; i < argv.length; i++) {
+            String arg = argv[i];
+
+
+            if (arg.equals("-b")) {
+                if (i == argv.length - 1 || argv[i+1].startsWith("-")) {
+                    System.err.println("error: missing broker name:port");
+                    System.exit(1);
+                }
+                broker = argv[++i];
+                continue;
+            }
+
+            if (arg.equals("-u")) {
+                if (i == argv.length - 1 || argv[i+1].startsWith("-")) {
+                    System.err.println("error: missing user name");
+                    System.exit(1);
+                }
+                username = argv[++i];
+                continue;
+            }
+
+            if (arg.equals("-p")) {
+                if (i == argv.length - 1 || argv[i+1].startsWith("-")) {
+                    System.err.println("error: missing password");
+                    System.exit(1);
+                }
+                password = argv[++i];
+                continue;
+            }
+
+            if (arg.equals("-qs")) {
+                if (i == argv.length - 1 || argv[i+1].startsWith("-")) {
+                    System.err.println("error: missing queue");
+                    System.exit(1);
+                }
+                queue = argv[++i];
+                continue;
+            }
+
+            if (arg.equals("-h")) {
+                printUsage();
+                System.exit(1);
+            }
+
+            // Invalid argument
+            System.err.println ("error: unexpected argument: "+arg);
+            printUsage();
+            System.exit(1);
+        }
+
+        // Start the JMS client for sending requests.
+        Requestor requestor = new Requestor();
+        requestor.start (broker, username, password, queue);
+
+    }
+
+    /** Prints the usage. */
+    private static void printUsage() {
+
+        StringBuffer use = new StringBuffer();
+        use.append("usage: java Requestor (options) ...\n\n");
+        use.append("options:\n");
+        use.append("  -b name:port Specify name:port of broker.\n");
+        use.append("               Default broker: "+DEFAULT_BROKER_NAME+"\n");
+        use.append("  -u name      Specify unique user name.\n");
+        use.append("               Default broker: "+DEFAULT_USER_NAME+"\n");
+        use.append("  -p password  Specify password for user.\n");
+        use.append("               Default password: "+DEFAULT_PASSWORD+"\n");
+        use.append("  -qs queue    Specify name of queue for sending.\n");
+        use.append("               Default queue: "+DEFAULT_QUEUE+"\n");
+        use.append("  -h           This help screen.\n");
+        System.err.println (use);
+    }
+
+}
+

http://git-wip-us.apache.org/repos/asf/activemq/blob/3f32507f/assembly/src/release/examples/openwire/exploring-jms/QueuePTPSamples/SelectorTalk/SelectorTalk.java
----------------------------------------------------------------------
diff --git a/assembly/src/release/examples/openwire/exploring-jms/QueuePTPSamples/SelectorTalk/SelectorTalk.java b/assembly/src/release/examples/openwire/exploring-jms/QueuePTPSamples/SelectorTalk/SelectorTalk.java
index f2609e7..05803b6 100644
--- a/assembly/src/release/examples/openwire/exploring-jms/QueuePTPSamples/SelectorTalk/SelectorTalk.java
+++ b/assembly/src/release/examples/openwire/exploring-jms/QueuePTPSamples/SelectorTalk/SelectorTalk.java
@@ -1,351 +1,351 @@
-/*
- * � 2001-2009, Progress Software Corporation and/or its subsidiaries or affiliates.  All rights reserved.
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- 
-Sample Application
-
-Writing a Basic JMS Application using Point-to-Point (Queues) with
-a Message Selector
-
-This sample starts up with a username, and the queues you are
-sending on, and receiving on.
-
-When messages are sent to a queue a property is set in the message header to
-a property value supplied on the command line. A separate command line
-value is used as a message selector for messages in the receive queue. In this
-sample we choose to create a property named "Department"
-
-Writing a line and pressing enter will send the message only to the
-indicated 'Talk' partner (or QueueReceiver).
-
-Usage:
-  java SelectorTalk -b <broker:port> -u <username> -p <password> -qs <queue> -qr <queue>
-            -s <selection>
-      -b broker:port points to your message broker
-                     Default: tcp://localhost:61616
-      -u username    must be unique (but is not checked)
-      -p password    password for user (not checked)
-      -qr queue      name of queue to receive
-      -qs queue      name of queue to send
-      -s selector    the message selection value
-
-You must specify either a queue for sending or receiving (or both) as well as
-a value with which to select received messages.
-
-
-Suggested demonstration:
-  - In separate console windows with the environment set,
-    start instances of the application under unique user names.
-    For example:
-       java SelectorTalk -u BOB -s SALES -qr  Q1 -qs  Q2
-       java SelectorTalk -u SALLY -s SALES -qr  Q2 -qs   Q1
-  - Enter text and then press Enter to send the message.
-  - See messages appear under the user's indicated name.
-  - Try changing the message selector on one console and note that it will
-    no longer receive messages.
-  - Stop a session by pressing CTRL+C in its console window.
-
-*/
-import org.apache.activemq.*;
-
-public class SelectorTalk
-    implements javax.jms.MessageListener
-{
-    private static final String DEFAULT_BROKER_NAME = "tcp://localhost:61616";
-    private static final String PROPERTY_NAME = "Department";
-    private static final String DEFAULT_PASSWORD = "password";
-    private static final int    MESSAGE_LIFESPAN = 1800000;  // milliseconds (30 minutes)
-
-    private javax.jms.Connection connect = null;
-    private javax.jms.Session sendSession = null;
-    private javax.jms.Session receiveSession = null;
-    private javax.jms.MessageProducer sender = null;
-
-    /** Create JMS client for sending and receiving messages. */
-    private void talker( String broker, String username, String password, String rQueue, String sQueue, String selection)
-    {
-        // Create a connection.
-        try
-         {
-            javax.jms.ConnectionFactory factory;
-            factory = new ActiveMQConnectionFactory(username, password, broker);
-            connect = factory.createConnection (username, password);
-            sendSession = connect.createSession(false,javax.jms.Session.AUTO_ACKNOWLEDGE);
-            receiveSession = connect.createSession(false,javax.jms.Session.AUTO_ACKNOWLEDGE);
-        }
-        catch (javax.jms.JMSException jmse)
-        {
-            System.err.println("error: Cannot connect to Broker - " + broker);
-            jmse.printStackTrace();
-            System.exit(1);
-        }
-
-        // Create Sender and Receiver 'Talk' queues
-        try
-        {
-            if (sQueue != null)
-            {
-                javax.jms.Queue sendQueue = sendSession.createQueue (sQueue);
-                sender = sendSession.createProducer(sendQueue);
-            }
-            if (rQueue != null)
-            {
-                //NOTE: the Queue Receiver is set up with the Message Selector:
-                javax.jms.Queue receiveQueue = receiveSession.createQueue (rQueue);
-                javax.jms.MessageConsumer qReceiver = receiveSession.createConsumer(receiveQueue, PROPERTY_NAME + " = \'" + selection + "\'");
-                qReceiver.setMessageListener(this);
-                connect.start();
-            }
-        }
-        catch (javax.jms.JMSException jmse)
-        {
-            jmse.printStackTrace();
-            exit();
-        }
-
-        try
-        {
-            if (rQueue != null)
-               System.out.println ("");
-            else
-               System.out.println ("\nNo receiving queue specified.\n");
-
-            // Read all standard input and send it as a message.
-            java.io.BufferedReader stdin =
-                new java.io.BufferedReader( new java.io.InputStreamReader( System.in ) );
-            if (sQueue != null)
-                System.out.println ("SelectorTalk application:\n"
-			            	      + "=========================\n"
-			            	  + "The application user " + username + " connects to the broker at " + DEFAULT_BROKER_NAME + ".\n"
-							  + "The application will send messages with " + PROPERTY_NAME + " set to " + selection + " to the " + sQueue + " queue.\n"
-                              + "The application creates a receiver on the " + rQueue + " queue selecting only messages where " + PROPERTY_NAME + " is " + selection + ".\n\n"
-
-							  + "Type some text, and then press Enter to publish it as a TextMesssage from " + username + ".\n");
-            else
-                System.out.println ("\nPress CTRL-C to exit.\n");
-
-            while ( true )
-            {
-                String s = stdin.readLine();
-
-                if ( s == null )
-                    exit();
-                else if ( s.length() > 0 && sQueue != null)
-                {
-                    javax.jms.TextMessage msg = sendSession.createTextMessage();
-                    msg.setText( username + ": " + s );
-                    // NOTE: here we set the property for each sent message.
-                    msg.setStringProperty(PROPERTY_NAME, selection);
-                    sender.send( msg,
-                                 javax.jms.DeliveryMode.PERSISTENT,
-                                 javax.jms.Message.DEFAULT_PRIORITY,
-                                 MESSAGE_LIFESPAN);
-                }
-            }
-        }
-        catch ( java.io.IOException ioe )
-        {
-            ioe.printStackTrace();
-        }
-        catch ( javax.jms.JMSException jmse )
-        {
-            jmse.printStackTrace();
-        }
-        // Close the connection.
-        exit();
-    }
-
-    /**
-     * Handle the message
-     * (as specified in the javax.jms.MessageListener interface).
-     */
-    public void onMessage( javax.jms.Message aMessage)
-    {
-        try
-        {
-            // Cast the message as a text message.
-            javax.jms.TextMessage textMessage = (javax.jms.TextMessage) aMessage;
-
-            // This handler reads a single String from the
-            // message and prints it to the standard output.
-            try
-            {
-                String string = textMessage.getText();
-                System.out.println( string );
-            }
-            catch (javax.jms.JMSException jmse)
-            {
-                jmse.printStackTrace();
-            }
-        }
-        catch (java.lang.RuntimeException rte)
-        {
-            rte.printStackTrace();
-        }
-    }
-
-    /** Cleanup resources and then exit. */
-    private void exit()
-    {
-        try
-        {
-            connect.close();
-        }
-        catch (javax.jms.JMSException jmse)
-        {
-            jmse.printStackTrace();
-        }
-
-        System.exit(0);
-    }
-
-    //
-    // NOTE: the remainder of this sample deals with reading arguments
-    // and does not utilize any JMS classes or code.
-    //
-
-    /** Main program entry point. */
-    public static void main(String argv[]) {
-
-        // Is there anything to do?
-        if (argv.length == 0) {
-            printUsage();
-            System.exit(1);
-        }
-
-        // Values to be read from parameters
-        String broker    	= DEFAULT_BROKER_NAME;
-        String username  	= null;
-        String password  	= DEFAULT_PASSWORD;
-        String qSender		= null;
-        String qReceiver	= null;
-        String selection    = null;
-
-        // Check parameters
-        for (int i = 0; i < argv.length; i++) {
-            String arg = argv[i];
-
-            // Options
-            if (!arg.startsWith("-")) {
-                System.err.println ("error: unexpected argument - "+arg);
-                printUsage();
-                System.exit(1);
-            }
-            else {
-                if (arg.equals("-b")) {
-                    if (i == argv.length - 1 || argv[i+1].startsWith("-")) {
-                        System.err.println("error: missing broker name:port");
-                        System.exit(1);
-                    }
-                    broker = argv[++i];
-                    continue;
-                }
-
-                if (arg.equals("-u")) {
-                    if (i == argv.length - 1 || argv[i+1].startsWith("-")) {
-                        System.err.println("error: missing user name");
-                        System.exit(1);
-                    }
-                    username = argv[++i];
-                    continue;
-                }
-
-                if (arg.equals("-p")) {
-                    if (i == argv.length - 1 || argv[i+1].startsWith("-")) {
-                        System.err.println("error: missing password");
-                        System.exit(1);
-                    }
-                    password = argv[++i];
-                    continue;
-                }
-
-                if (arg.equals("-qr")) {
-                    if (i == argv.length - 1 || argv[i+1].startsWith("-")) {
-                        System.err.println("error: missing receive queue parameter");
-                        System.exit(1);
-                    }
-                    qReceiver = argv[++i];
-                    continue;
-                }
-
-                if (arg.equals("-qs")) {
-                    if (i == argv.length - 1 || argv[i+1].startsWith("-")) {
-                        System.err.println("error: missing send queue parameter");
-                        System.exit(1);
-                    }
-                    qSender = argv[++i];
-                    continue;
-                }
-
-                if (arg.equals("-s")) {
-                    if (i == argv.length - 1 || argv[i+1].startsWith("-")) {
-                        System.err.println("error: missing selectiion");
-                        System.exit(1);
-                    }
-                    selection = argv[++i];
-                    continue;
-                }
-
-                if (arg.equals("-h")) {
-                    printUsage();
-                    System.exit(1);
-                }
-            }
-        }
-
-        // Check values read in.
-        if (username == null) {
-            System.err.println ("error: user name must be supplied");
-            printUsage();
-            System.exit(1);
-        }
-
-        if (qReceiver == null && qSender == null) {
-            System.err.println ("error: receive queue, or send queue, must be supplied");
-            printUsage();
-            System.exit(1);
-        }
-
-        if (selection == null) {
-            System.err.println ("error: selection must be supplied (e.g. -s SALES)\n");
-            printUsage();
-            System.exit(1);
-        }
-
-
-        // Start the JMS client for the "Talk".
-        SelectorTalk talk = new SelectorTalk();
-        talk.talker (broker, username, password, qReceiver, qSender, selection);
-
-    }
-
-    /** Prints the usage. */
-    private static void printUsage() {
-
-        StringBuffer use = new StringBuffer();
-        use.append("usage: java SelectorTalk (options) ...\n\n");
-        use.append("options:\n");
-        use.append("  -b  name:port Specify name:port of broker.\n");
-        use.append("                Default broker: "+DEFAULT_BROKER_NAME+"\n");
-        use.append("  -u  name      Specify unique user name. (Required)\n");
-        use.append("  -p  password  Specify password for user.\n");
-        use.append("                Default password: "+DEFAULT_PASSWORD+"\n");
-        use.append("  -qr queue     Specify queue for receiving messages.\n");
-        use.append("  -qs queue     Specify queue for sending messages.\n");
-        use.append("  -s  selection required, selection used to receive messages.\n");
-        use.append("  -h            This help screen.\n");
-        System.err.println (use);
-    }
-
-}
+/*
+ * � 2001-2009, Progress Software Corporation and/or its subsidiaries or affiliates.  All rights reserved.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ 
+Sample Application
+
+Writing a Basic JMS Application using Point-to-Point (Queues) with
+a Message Selector
+
+This sample starts up with a username, and the queues you are
+sending on, and receiving on.
+
+When messages are sent to a queue a property is set in the message header to
+a property value supplied on the command line. A separate command line
+value is used as a message selector for messages in the receive queue. In this
+sample we choose to create a property named "Department"
+
+Writing a line and pressing enter will send the message only to the
+indicated 'Talk' partner (or QueueReceiver).
+
+Usage:
+  java SelectorTalk -b <broker:port> -u <username> -p <password> -qs <queue> -qr <queue>
+            -s <selection>
+      -b broker:port points to your message broker
+                     Default: tcp://localhost:61616
+      -u username    must be unique (but is not checked)
+      -p password    password for user (not checked)
+      -qr queue      name of queue to receive
+      -qs queue      name of queue to send
+      -s selector    the message selection value
+
+You must specify either a queue for sending or receiving (or both) as well as
+a value with which to select received messages.
+
+
+Suggested demonstration:
+  - In separate console windows with the environment set,
+    start instances of the application under unique user names.
+    For example:
+       java SelectorTalk -u BOB -s SALES -qr  Q1 -qs  Q2
+       java SelectorTalk -u SALLY -s SALES -qr  Q2 -qs   Q1
+  - Enter text and then press Enter to send the message.
+  - See messages appear under the user's indicated name.
+  - Try changing the message selector on one console and note that it will
+    no longer receive messages.
+  - Stop a session by pressing CTRL+C in its console window.
+
+*/
+import org.apache.activemq.*;
+
+public class SelectorTalk
+    implements javax.jms.MessageListener
+{
+    private static final String DEFAULT_BROKER_NAME = "tcp://localhost:61616";
+    private static final String PROPERTY_NAME = "Department";
+    private static final String DEFAULT_PASSWORD = "password";
+    private static final int    MESSAGE_LIFESPAN = 1800000;  // milliseconds (30 minutes)
+
+    private javax.jms.Connection connect = null;
+    private javax.jms.Session sendSession = null;
+    private javax.jms.Session receiveSession = null;
+    private javax.jms.MessageProducer sender = null;
+
+    /** Create JMS client for sending and receiving messages. */
+    private void talker( String broker, String username, String password, String rQueue, String sQueue, String selection)
+    {
+        // Create a connection.
+        try
+         {
+            javax.jms.ConnectionFactory factory;
+            factory = new ActiveMQConnectionFactory(username, password, broker);
+            connect = factory.createConnection (username, password);
+            sendSession = connect.createSession(false,javax.jms.Session.AUTO_ACKNOWLEDGE);
+            receiveSession = connect.createSession(false,javax.jms.Session.AUTO_ACKNOWLEDGE);
+        }
+        catch (javax.jms.JMSException jmse)
+        {
+            System.err.println("error: Cannot connect to Broker - " + broker);
+            jmse.printStackTrace();
+            System.exit(1);
+        }
+
+        // Create Sender and Receiver 'Talk' queues
+        try
+        {
+            if (sQueue != null)
+            {
+                javax.jms.Queue sendQueue = sendSession.createQueue (sQueue);
+                sender = sendSession.createProducer(sendQueue);
+            }
+            if (rQueue != null)
+            {
+                //NOTE: the Queue Receiver is set up with the Message Selector:
+                javax.jms.Queue receiveQueue = receiveSession.createQueue (rQueue);
+                javax.jms.MessageConsumer qReceiver = receiveSession.createConsumer(receiveQueue, PROPERTY_NAME + " = \'" + selection + "\'");
+                qReceiver.setMessageListener(this);
+                connect.start();
+            }
+        }
+        catch (javax.jms.JMSException jmse)
+        {
+            jmse.printStackTrace();
+            exit();
+        }
+
+        try
+        {
+            if (rQueue != null)
+               System.out.println ("");
+            else
+               System.out.println ("\nNo receiving queue specified.\n");
+
+            // Read all standard input and send it as a message.
+            java.io.BufferedReader stdin =
+                new java.io.BufferedReader( new java.io.InputStreamReader( System.in ) );
+            if (sQueue != null)
+                System.out.println ("SelectorTalk application:\n"
+			            	      + "=========================\n"
+			            	  + "The application user " + username + " connects to the broker at " + DEFAULT_BROKER_NAME + ".\n"
+							  + "The application will send messages with " + PROPERTY_NAME + " set to " + selection + " to the " + sQueue + " queue.\n"
+                              + "The application creates a receiver on the " + rQueue + " queue selecting only messages where " + PROPERTY_NAME + " is " + selection + ".\n\n"
+
+							  + "Type some text, and then press Enter to publish it as a TextMesssage from " + username + ".\n");
+            else
+                System.out.println ("\nPress CTRL-C to exit.\n");
+
+            while ( true )
+            {
+                String s = stdin.readLine();
+
+                if ( s == null )
+                    exit();
+                else if ( s.length() > 0 && sQueue != null)
+                {
+                    javax.jms.TextMessage msg = sendSession.createTextMessage();
+                    msg.setText( username + ": " + s );
+                    // NOTE: here we set the property for each sent message.
+                    msg.setStringProperty(PROPERTY_NAME, selection);
+                    sender.send( msg,
+                                 javax.jms.DeliveryMode.PERSISTENT,
+                                 javax.jms.Message.DEFAULT_PRIORITY,
+                                 MESSAGE_LIFESPAN);
+                }
+            }
+        }
+        catch ( java.io.IOException ioe )
+        {
+            ioe.printStackTrace();
+        }
+        catch ( javax.jms.JMSException jmse )
+        {
+            jmse.printStackTrace();
+        }
+        // Close the connection.
+        exit();
+    }
+
+    /**
+     * Handle the message
+     * (as specified in the javax.jms.MessageListener interface).
+     */
+    public void onMessage( javax.jms.Message aMessage)
+    {
+        try
+        {
+            // Cast the message as a text message.
+            javax.jms.TextMessage textMessage = (javax.jms.TextMessage) aMessage;
+
+            // This handler reads a single String from the
+            // message and prints it to the standard output.
+            try
+            {
+                String string = textMessage.getText();
+                System.out.println( string );
+            }
+            catch (javax.jms.JMSException jmse)
+            {
+                jmse.printStackTrace();
+            }
+        }
+        catch (java.lang.RuntimeException rte)
+        {
+            rte.printStackTrace();
+        }
+    }
+
+    /** Cleanup resources and then exit. */
+    private void exit()
+    {
+        try
+        {
+            connect.close();
+        }
+        catch (javax.jms.JMSException jmse)
+        {
+            jmse.printStackTrace();
+        }
+
+        System.exit(0);
+    }
+
+    //
+    // NOTE: the remainder of this sample deals with reading arguments
+    // and does not utilize any JMS classes or code.
+    //
+
+    /** Main program entry point. */
+    public static void main(String argv[]) {
+
+        // Is there anything to do?
+        if (argv.length == 0) {
+            printUsage();
+            System.exit(1);
+        }
+
+        // Values to be read from parameters
+        String broker    	= DEFAULT_BROKER_NAME;
+        String username  	= null;
+        String password  	= DEFAULT_PASSWORD;
+        String qSender		= null;
+        String qReceiver	= null;
+        String selection    = null;
+
+        // Check parameters
+        for (int i = 0; i < argv.length; i++) {
+            String arg = argv[i];
+
+            // Options
+            if (!arg.startsWith("-")) {
+                System.err.println ("error: unexpected argument - "+arg);
+                printUsage();
+                System.exit(1);
+            }
+            else {
+                if (arg.equals("-b")) {
+                    if (i == argv.length - 1 || argv[i+1].startsWith("-")) {
+                        System.err.println("error: missing broker name:port");
+                        System.exit(1);
+                    }
+                    broker = argv[++i];
+                    continue;
+                }
+
+                if (arg.equals("-u")) {
+                    if (i == argv.length - 1 || argv[i+1].startsWith("-")) {
+                        System.err.println("error: missing user name");
+                        System.exit(1);
+                    }
+                    username = argv[++i];
+                    continue;
+                }
+
+                if (arg.equals("-p")) {
+                    if (i == argv.length - 1 || argv[i+1].startsWith("-")) {
+                        System.err.println("error: missing password");
+                        System.exit(1);
+                    }
+                    password = argv[++i];
+                    continue;
+                }
+
+                if (arg.equals("-qr")) {
+                    if (i == argv.length - 1 || argv[i+1].startsWith("-")) {
+                        System.err.println("error: missing receive queue parameter");
+                        System.exit(1);
+                    }
+                    qReceiver = argv[++i];
+                    continue;
+                }
+
+                if (arg.equals("-qs")) {
+                    if (i == argv.length - 1 || argv[i+1].startsWith("-")) {
+                        System.err.println("error: missing send queue parameter");
+                        System.exit(1);
+                    }
+                    qSender = argv[++i];
+                    continue;
+                }
+
+                if (arg.equals("-s")) {
+                    if (i == argv.length - 1 || argv[i+1].startsWith("-")) {
+                        System.err.println("error: missing selectiion");
+                        System.exit(1);
+                    }
+                    selection = argv[++i];
+                    continue;
+                }
+
+                if (arg.equals("-h")) {
+                    printUsage();
+                    System.exit(1);
+                }
+            }
+        }
+
+        // Check values read in.
+        if (username == null) {
+            System.err.println ("error: user name must be supplied");
+            printUsage();
+            System.exit(1);
+        }
+
+        if (qReceiver == null && qSender == null) {
+            System.err.println ("error: receive queue, or send queue, must be supplied");
+            printUsage();
+            System.exit(1);
+        }
+
+        if (selection == null) {
+            System.err.println ("error: selection must be supplied (e.g. -s SALES)\n");
+            printUsage();
+            System.exit(1);
+        }
+
+
+        // Start the JMS client for the "Talk".
+        SelectorTalk talk = new SelectorTalk();
+        talk.talker (broker, username, password, qReceiver, qSender, selection);
+
+    }
+
+    /** Prints the usage. */
+    private static void printUsage() {
+
+        StringBuffer use = new StringBuffer();
+        use.append("usage: java SelectorTalk (options) ...\n\n");
+        use.append("options:\n");
+        use.append("  -b  name:port Specify name:port of broker.\n");
+        use.append("                Default broker: "+DEFAULT_BROKER_NAME+"\n");
+        use.append("  -u  name      Specify unique user name. (Required)\n");
+        use.append("  -p  password  Specify password for user.\n");
+        use.append("                Default password: "+DEFAULT_PASSWORD+"\n");
+        use.append("  -qr queue     Specify queue for receiving messages.\n");
+        use.append("  -qs queue     Specify queue for sending messages.\n");
+        use.append("  -s  selection required, selection used to receive messages.\n");
+        use.append("  -h            This help screen.\n");
+        System.err.println (use);
+    }
+
+}


Mime
View raw message